FM / library

/usr/share/doc/python3-docs/html/_sources/library/

/usr/share/doc/python3-docs/html/_sources/library

Name	Size	Mode	Actions
2to3.rst.txt	15898	0644	edit dl rm
abc.rst.txt	11805	0644	edit dl rm
aifc.rst.txt	7503	0644	edit dl rm
allos.rst.txt	678	0644	edit dl rm
archiving.rst.txt	440	0644	edit dl rm
argparse.rst.txt	77480	0644	edit dl rm
array.rst.txt	10812	0644	edit dl rm
ast.rst.txt	10159	0644	edit dl rm
asynchat.rst.txt	8528	0644	edit dl rm
asyncio-dev.rst.txt	13398	0644	edit dl rm
asyncio-eventloop.rst.txt	33701	0644	edit dl rm
asyncio-eventloops.rst.txt	7660	0644	edit dl rm
asyncio-protocol.rst.txt	25170	0644	edit dl rm
asyncio-queue.rst.txt	4328	0644	edit dl rm
asyncio-stream.rst.txt	14363	0644	edit dl rm
asyncio-subprocess.rst.txt	15544	0644	edit dl rm
asyncio-sync.rst.txt	9078	0644	edit dl rm
asyncio-task.rst.txt	25406	0644	edit dl rm
asyncio.rst.txt	2272	0644	edit dl rm
asyncore.rst.txt	13624	0644	edit dl rm
atexit.rst.txt	3669	0644	edit dl rm
audioop.rst.txt	10712	0644	edit dl rm
base64.rst.txt	10371	0644	edit dl rm
bdb.rst.txt	12985	0644	edit dl rm
binary.rst.txt	654	0644	edit dl rm
binascii.rst.txt	6539	0644	edit dl rm
binhex.rst.txt	1709	0644	edit dl rm
bisect.rst.txt	5398	0644	edit dl rm
builtins.rst.txt	1465	0644	edit dl rm
bz2.rst.txt	8825	0644	edit dl rm
calendar.rst.txt	10988	0644	edit dl rm
cgi.rst.txt	22650	0644	edit dl rm
cgitb.rst.txt	2918	0644	edit dl rm
chunk.rst.txt	5094	0644	edit dl rm
cmath.rst.txt	9326	0644	edit dl rm
cmd.rst.txt	13795	0644	edit dl rm
code.rst.txt	7817	0644	edit dl rm
codecs.rst.txt	75564	0644	edit dl rm
codeop.rst.txt	3021	0644	edit dl rm
collections.abc.rst.txt	12861	0644	edit dl rm
collections.rst.txt	46063	0644	edit dl rm
colorsys.rst.txt	1820	0644	edit dl rm
compileall.rst.txt	8975	0644	edit dl rm
concurrency.rst.txt	673	0644	edit dl rm
concurrent.futures.rst.txt	16910	0644	edit dl rm
concurrent.rst.txt	171	0644	edit dl rm
configparser.rst.txt	48756	0644	edit dl rm
constants.rst.txt	3331	0644	edit dl rm
contextlib.rst.txt	28175	0644	edit dl rm
copy.rst.txt	3378	0644	edit dl rm
copyreg.rst.txt	2182	0644	edit dl rm
crypt.rst.txt	5122	0644	edit dl rm
crypto.rst.txt	411	0644	edit dl rm
csv.rst.txt	19902	0644	edit dl rm
ctypes.rst.txt	88613	0644	edit dl rm
curses.ascii.rst.txt	8920	0644	edit dl rm
curses.panel.rst.txt	2764	0644	edit dl rm
curses.rst.txt	76397	0644	edit dl rm
custominterp.rst.txt	569	0644	edit dl rm
datatypes.rst.txt	751	0644	edit dl rm
datetime.rst.txt	90524	0644	edit dl rm
dbm.rst.txt	14293	0644	edit dl rm
debug.rst.txt	471	0644	edit dl rm
decimal.rst.txt	74869	0644	edit dl rm
development.rst.txt	704	0644	edit dl rm
difflib.rst.txt	29861	0644	edit dl rm
dis.rst.txt	32567	0644	edit dl rm
distribution.rst.txt	452	0644	edit dl rm
distutils.rst.txt	1974	0644	edit dl rm
doctest.rst.txt	71743	0644	edit dl rm
dummy_threading.rst.txt	784	0644	edit dl rm
email.charset.rst.txt	9293	0644	edit dl rm
email.compat32-message.rst.txt	33493	0644	edit dl rm
email.contentmanager.rst.txt	9112	0644	edit dl rm
email.encoders.rst.txt	2715	0644	edit dl rm
email.errors.rst.txt	4792	0644	edit dl rm
email.examples.rst.txt	1915	0644	edit dl rm
email.generator.rst.txt	13637	0644	edit dl rm
email.header.rst.txt	9188	0644	edit dl rm
email.headerregistry.rst.txt	17957	0644	edit dl rm
email.iterators.rst.txt	2795	0644	edit dl rm
email.message.rst.txt	33008	0644	edit dl rm
email.mime.rst.txt	11721	0644	edit dl rm
email.parser.rst.txt	14092	0644	edit dl rm
email.policy.rst.txt	27022	0644	edit dl rm
email.rst.txt	6785	0644	edit dl rm
email.util.rst.txt	9214	0644	edit dl rm
ensurepip.rst.txt	4987	0644	edit dl rm
enum.rst.txt	32751	0644	edit dl rm
errno.rst.txt	6811	0644	edit dl rm
exceptions.rst.txt	25570	0644	edit dl rm
faulthandler.rst.txt	6136	0644	edit dl rm
fcntl.rst.txt	7152	0644	edit dl rm
filecmp.rst.txt	5623	0644	edit dl rm
fileformats.rst.txt	287	0644	edit dl rm
fileinput.rst.txt	8051	0644	edit dl rm
filesys.rst.txt	961	0644	edit dl rm
fnmatch.rst.txt	3103	0644	edit dl rm
formatter.rst.txt	13242	0644	edit dl rm
fpectl.rst.txt	4180	0644	edit dl rm
fractions.rst.txt	6364	0644	edit dl rm
frameworks.rst.txt	391	0644	edit dl rm
ftplib.rst.txt	17552	0644	edit dl rm
functional.rst.txt	365	0644	edit dl rm
functions.rst.txt	71621	0644	edit dl rm
functools.rst.txt	18503	0644	edit dl rm
gc.rst.txt	9694	0644	edit dl rm
getopt.rst.txt	6557	0644	edit dl rm
getpass.rst.txt	1882	0644	edit dl rm
gettext.rst.txt	25588	0644	edit dl rm
glob.rst.txt	3508	0644	edit dl rm
grp.rst.txt	2417	0644	edit dl rm
gzip.rst.txt	8301	0644	edit dl rm
hashlib.rst.txt	26523	0644	edit dl rm
heapq.rst.txt	13402	0644	edit dl rm
hmac.rst.txt	4020	0644	edit dl rm
html.entities.rst.txt	1319	0644	edit dl rm
html.parser.rst.txt	11275	0644	edit dl rm
html.rst.txt	1304	0644	edit dl rm
http.client.rst.txt	18870	0644	edit dl rm
http.cookiejar.rst.txt	27832	0644	edit dl rm
http.cookies.rst.txt	8645	0644	edit dl rm
http.rst.txt	7096	0644	edit dl rm
http.server.rst.txt	17639	0644	edit dl rm
i18n.rst.txt	408	0644	edit dl rm
idle.rst.txt	25834	0644	edit dl rm
imaplib.rst.txt	20367	0644	edit dl rm
imghdr.rst.txt	2938	0644	edit dl rm
imp.rst.txt	15548	0644	edit dl rm
importlib.rst.txt	53563	0644	edit dl rm
index.rst.txt	2258	0644	edit dl rm
inspect.rst.txt	53928	0644	edit dl rm
internet.rst.txt	992	0644	edit dl rm
intro.rst.txt	2645	0644	edit dl rm
io.rst.txt	40328	0644	edit dl rm
ipaddress.rst.txt	32340	0644	edit dl rm
ipc.rst.txt	649	0644	edit dl rm
itertools.rst.txt	38459	0644	edit dl rm
json.rst.txt	27876	0644	edit dl rm
keyword.rst.txt	617	0644	edit dl rm
language.rst.txt	522	0644	edit dl rm
linecache.rst.txt	2408	0644	edit dl rm
locale.rst.txt	25470	0644	edit dl rm
logging.config.rst.txt	33886	0644	edit dl rm
logging.handlers.rst.txt	42497	0644	edit dl rm
logging.rst.txt	60479	0644	edit dl rm
lzma.rst.txt	17361	0644	edit dl rm
macpath.rst.txt	707	0644	edit dl rm
mailbox.rst.txt	63055	0644	edit dl rm
mailcap.rst.txt	3691	0644	edit dl rm
markup.rst.txt	679	0644	edit dl rm
marshal.rst.txt	4855	0644	edit dl rm
math.rst.txt	14375	0644	edit dl rm
mimetypes.rst.txt	9839	0644	edit dl rm
misc.rst.txt	247	0644	edit dl rm
mm.rst.txt	431	0644	edit dl rm
mmap.rst.txt	11232	0644	edit dl rm
modulefinder.rst.txt	3240	0644	edit dl rm
modules.rst.txt	355	0644	edit dl rm
msilib.rst.txt	18612	0644	edit dl rm
msvcrt.rst.txt	4392	0644	edit dl rm
multiprocessing.rst.txt	104494	0644	edit dl rm
netdata.rst.txt	339	0644	edit dl rm
netrc.rst.txt	3007	0644	edit dl rm
nis.rst.txt	1993	0644	edit dl rm
nntplib.rst.txt	21821	0644	edit dl rm
numbers.rst.txt	8089	0644	edit dl rm
numeric.rst.txt	696	0644	edit dl rm
operator.rst.txt	18989	0644	edit dl rm
optparse.rst.txt	76996	0644	edit dl rm
os.path.rst.txt	16419	0644	edit dl rm
os.rst.txt	137534	0644	edit dl rm
ossaudiodev.rst.txt	17845	0644	edit dl rm
othergui.rst.txt	2822	0644	edit dl rm
parser.rst.txt	15148	0644	edit dl rm
pathlib.rst.txt	30045	0644	edit dl rm
pdb.rst.txt	19454	0644	edit dl rm
persistence.rst.txt	591	0644	edit dl rm
pickle.rst.txt	37440	0644	edit dl rm
pickletools.rst.txt	3729	0644	edit dl rm
pipes.rst.txt	2557	0644	edit dl rm
pkgutil.rst.txt	8730	0644	edit dl rm
platform.rst.txt	9624	0644	edit dl rm
plistlib.rst.txt	7398	0644	edit dl rm
poplib.rst.txt	8197	0644	edit dl rm
posix.rst.txt	3694	0644	edit dl rm
pprint.rst.txt	14274	0644	edit dl rm
profile.rst.txt	27969	0644	edit dl rm
pty.rst.txt	3123	0644	edit dl rm
pwd.rst.txt	2739	0644	edit dl rm
pyclbr.rst.txt	3297	0644	edit dl rm
pydoc.rst.txt	4688	0644	edit dl rm
pyexpat.rst.txt	28620	0644	edit dl rm
python.rst.txt	475	0644	edit dl rm
py_compile.rst.txt	3851	0644	edit dl rm
queue.rst.txt	7268	0644	edit dl rm
quopri.rst.txt	2571	0644	edit dl rm
random.rst.txt	18503	0644	edit dl rm
re.rst.txt	64936	0644	edit dl rm
readline.rst.txt	11943	0644	edit dl rm
reprlib.rst.txt	5162	0644	edit dl rm
resource.rst.txt	12291	0644	edit dl rm
rlcompleter.rst.txt	2294	0644	edit dl rm
runpy.rst.txt	8285	0644	edit dl rm
sched.rst.txt	4842	0644	edit dl rm
secrets.rst.txt	5930	0644	edit dl rm
select.rst.txt	28175	0644	edit dl rm
selectors.rst.txt	8925	0644	edit dl rm
shelve.rst.txt	8390	0644	edit dl rm
shlex.rst.txt	16441	0644	edit dl rm
shutil.rst.txt	26014	0644	edit dl rm
signal.rst.txt	17218	0644	edit dl rm
site.rst.txt	9628	0644	edit dl rm
smtpd.rst.txt	10806	0644	edit dl rm
smtplib.rst.txt	23439	0644	edit dl rm
sndhdr.rst.txt	1994	0644	edit dl rm
socket.rst.txt	68202	0644	edit dl rm
socketserver.rst.txt	23712	0644	edit dl rm
spwd.rst.txt	2958	0644	edit dl rm
sqlite3.rst.txt	39215	0644	edit dl rm
ssl.rst.txt	96021	0644	edit dl rm
stat.rst.txt	9805	0644	edit dl rm
statistics.rst.txt	15301	0644	edit dl rm
stdtypes.rst.txt	179240	0644	edit dl rm
string.rst.txt	35374	0644	edit dl rm
stringprep.rst.txt	4279	0644	edit dl rm
struct.rst.txt	19581	0644	edit dl rm
subprocess.rst.txt	45793	0644	edit dl rm
sunau.rst.txt	7390	0644	edit dl rm
superseded.rst.txt	258	0644	edit dl rm
symbol.rst.txt	975	0644	edit dl rm
symtable.rst.txt	4964	0644	edit dl rm
sys.rst.txt	58273	0644	edit dl rm
sysconfig.rst.txt	8749	0644	edit dl rm
syslog.rst.txt	4302	0644	edit dl rm
tabnanny.rst.txt	2007	0644	edit dl rm
tarfile.rst.txt	31749	0644	edit dl rm
telnetlib.rst.txt	7899	0644	edit dl rm
tempfile.rst.txt	13857	0644	edit dl rm
termios.rst.txt	3751	0644	edit dl rm
test.rst.txt	25764	0644	edit dl rm
text.rst.txt	584	0644	edit dl rm
textwrap.rst.txt	10519	0644	edit dl rm
threading.rst.txt	39257	0644	edit dl rm
time.rst.txt	32967	0644	edit dl rm
timeit.rst.txt	13000	0644	edit dl rm
tk.rst.txt	1639	0644	edit dl rm
tkinter.rst.txt	33027	0644	edit dl rm
tkinter.scrolledtext.rst.txt	1255	0644	edit dl rm
tkinter.tix.rst.txt	22653	0644	edit dl rm
tkinter.ttk.rst.txt	58489	0644	edit dl rm
token.rst.txt	2607	0644	edit dl rm
tokenize.rst.txt	10002	0644	edit dl rm
trace.rst.txt	6914	0644	edit dl rm
traceback.rst.txt	17854	0644	edit dl rm
tracemalloc.rst.txt	22089	0644	edit dl rm
tty.rst.txt	1097	0644	edit dl rm
turtle.rst.txt	71221	0644	edit dl rm
types.rst.txt	9999	0644	edit dl rm
typing.rst.txt	34332	0644	edit dl rm
undoc.rst.txt	780	0644	edit dl rm
unicodedata.rst.txt	5762	0644	edit dl rm
unittest.mock-examples.rst.txt	46206	0644	edit dl rm
unittest.mock.rst.txt	85991	0644	edit dl rm
unittest.rst.txt	93304	0644	edit dl rm
unix.rst.txt	446	0644	edit dl rm
urllib.error.rst.txt	2199	0644	edit dl rm
urllib.parse.rst.txt	27332	0644	edit dl rm
urllib.request.rst.txt	59360	0644	edit dl rm
urllib.robotparser.rst.txt	2969	0644	edit dl rm
urllib.rst.txt	466	0644	edit dl rm
uu.rst.txt	2387	0644	edit dl rm
uuid.rst.txt	8760	0644	edit dl rm
venv.rst.txt	20621	0644	edit dl rm
warnings.rst.txt	20152	0644	edit dl rm
wave.rst.txt	6870	0644	edit dl rm
weakref.rst.txt	21328	0644	edit dl rm
webbrowser.rst.txt	9783	0644	edit dl rm
windows.rst.txt	272	0644	edit dl rm
winreg.rst.txt	24073	0644	edit dl rm
winsound.rst.txt	5134	0644	edit dl rm
wsgiref.rst.txt	33047	0644	edit dl rm
xdrlib.rst.txt	8078	0644	edit dl rm
xml.dom.minidom.rst.txt	10198	0644	edit dl rm
xml.dom.pulldom.rst.txt	5186	0644	edit dl rm
xml.dom.rst.txt	39507	0644	edit dl rm
xml.etree.elementtree.rst.txt	43871	0644	edit dl rm
xml.rst.txt	6071	0644	edit dl rm
xml.sax.handler.rst.txt	15399	0644	edit dl rm
xml.sax.reader.rst.txt	12133	0644	edit dl rm
xml.sax.rst.txt	7159	0644	edit dl rm
xml.sax.utils.rst.txt	3901	0644	edit dl rm
xmlrpc.client.rst.txt	23071	0644	edit dl rm
xmlrpc.rst.txt	475	0644	edit dl rm
xmlrpc.server.rst.txt	14990	0644	edit dl rm
zipapp.rst.txt	17392	0644	edit dl rm
zipfile.rst.txt	24005	0644	edit dl rm
zipimport.rst.txt	5805	0644	edit dl rm
zlib.rst.txt	13912	0644	edit dl rm
_dummy_thread.rst.txt	762	0644	edit dl rm
_thread.rst.txt	6886	0644	edit dl rm
__future__.rst.txt	5245	0644	edit dl rm
__main__.rst.txt	904	0644	edit dl rm

Edit: /usr/share/doc/python3-docs/html/_sources/library/ftplib.rst.txt (17552B)

:mod:`ftplib` --- FTP protocol client
=====================================

.. module:: ftplib
   :synopsis: FTP protocol client (requires sockets).

**Source code:** :source:`Lib/ftplib.py`

.. index::
   pair: FTP; protocol
   single: FTP; ftplib (standard module)

--------------

This module defines the class :class:`FTP` and a few related items. The
:class:`FTP` class implements the client side of the FTP protocol.  You can use
this to write Python programs that perform a variety of automated FTP jobs, such
as mirroring other FTP servers.  It is also used by the module
:mod:`urllib.request` to handle URLs that use FTP.  For more information on FTP
(File Transfer Protocol), see Internet :rfc:`959`.

Here's a sample session using the :mod:`ftplib` module::

>>> from ftplib import FTP
   >>> ftp = FTP('ftp.debian.org')     # connect to host, default port
   >>> ftp.login()                     # user anonymous, passwd anonymous@
   '230 Login successful.'
   >>> ftp.cwd('debian')               # change into "debian" directory
   >>> ftp.retrlines('LIST')           # list directory contents
   -rw-rw-r--    1 1176     1176         1063 Jun 15 10:18 README
   ...
   drwxr-sr-x    5 1176     1176         4096 Dec 19  2000 pool
   drwxr-sr-x    4 1176     1176         4096 Nov 17  2008 project
   drwxr-xr-x    3 1176     1176         4096 Oct 10  2012 tools
   '226 Directory send OK.'
   >>> ftp.retrbinary('RETR README', open('README', 'wb').write)
   '226 Transfer complete.'
   >>> ftp.quit()

The module defines the following items:

.. class:: FTP(host='', user='', passwd='', acct='', timeout=None, source_address=None)

Return a new instance of the :class:`FTP` class.  When *host* is given, the
   method call ``connect(host)`` is made.  When *user* is given, additionally
   the method call ``login(user, passwd, acct)`` is made (where *passwd* and
   *acct* default to the empty string when not given).  The optional *timeout*
   parameter specifies a timeout in seconds for blocking operations like the
   connection attempt (if is not specified, the global default timeout setting
   will be used). *source_address* is a 2-tuple ``(host, port)`` for the socket
   to bind to as its source address before connecting.

The :class:`FTP` class supports the :keyword:`with` statement, e.g.:

>>> from ftplib import FTP
    >>> with FTP("ftp1.at.proftpd.org") as ftp:
    ...     ftp.login()
    ...     ftp.dir()
    ... # doctest: +SKIP
    '230 Anonymous login ok, restrictions apply.'
    dr-xr-xr-x   9 ftp      ftp           154 May  6 10:43 .
    dr-xr-xr-x   9 ftp      ftp           154 May  6 10:43 ..
    dr-xr-xr-x   5 ftp      ftp          4096 May  6 10:43 CentOS
    dr-xr-xr-x   3 ftp      ftp            18 Jul 10  2008 Fedora
    >>>

.. versionchanged:: 3.2
      Support for the :keyword:`with` statement was added.

.. versionchanged:: 3.3
      *source_address* parameter was added.

.. class:: FTP_TLS(host='', user='', passwd='', acct='', keyfile=None, certfile=None, context=None, timeout=None, source_address=None)

A :class:`FTP` subclass which adds TLS support to FTP as described in
   :rfc:`4217`.
   Connect as usual to port 21 implicitly securing the FTP control connection
   before authenticating. Securing the data connection requires the user to
   explicitly ask for it by calling the :meth:`prot_p` method.  *context*
   is a :class:`ssl.SSLContext` object which allows bundling SSL configuration
   options, certificates and private keys into a single (potentially
   long-lived) structure.  Please read :ref:`ssl-security` for best practices.

*keyfile* and *certfile* are a legacy alternative to *context* -- they
   can point to PEM-formatted private key and certificate chain files
   (respectively) for the SSL connection.

.. versionadded:: 3.2

.. versionchanged:: 3.3
      *source_address* parameter was added.

.. versionchanged:: 3.4
      The class now supports hostname check with
      :attr:`ssl.SSLContext.check_hostname` and *Server Name Indication* (see
      :data:`ssl.HAS_SNI`).

.. deprecated:: 3.6

*keyfile* and *certfile* are deprecated in favor of *context*.
       Please use :meth:`ssl.SSLContext.load_cert_chain` instead, or let
       :func:`ssl.create_default_context` select the system's trusted CA
       certificates for you.

Here's a sample session using the :class:`FTP_TLS` class::

>>> ftps = FTP_TLS('ftp.pureftpd.org')
      >>> ftps.login()
      '230 Anonymous user logged in'
      >>> ftps.prot_p()
      '200 Data protection level set to "private"'
      >>> ftps.nlst()
      ['6jack', 'OpenBSD', 'antilink', 'blogbench', 'bsdcam', 'clockspeed', 'djbdns-jedi', 'docs', 'eaccelerator-jedi', 'favicon.ico', 'francotone', 'fugu', 'ignore', 'libpuzzle', 'metalog', 'minidentd', 'misc', 'mysql-udf-global-user-variables', 'php-jenkins-hash', 'php-skein-hash', 'php-webdav', 'phpaudit', 'phpbench', 'pincaster', 'ping', 'posto', 'pub', 'public', 'public_keys', 'pure-ftpd', 'qscan', 'qtc', 'sharedance', 'skycache', 'sound', 'tmp', 'ucarp']

.. exception:: error_reply

Exception raised when an unexpected reply is received from the server.

.. exception:: error_temp

Exception raised when an error code signifying a temporary error (response
   codes in the range 400--499) is received.

.. exception:: error_perm

Exception raised when an error code signifying a permanent error (response
   codes in the range 500--599) is received.

.. exception:: error_proto

Exception raised when a reply is received from the server that does not fit
   the response specifications of the File Transfer Protocol, i.e. begin with a
   digit in the range 1--5.

.. data:: all_errors

The set of all exceptions (as a tuple) that methods of :class:`FTP`
   instances may raise as a result of problems with the FTP connection (as
   opposed to programming errors made by the caller).  This set includes the
   four exceptions listed above as well as :exc:`OSError`.

.. seealso::

Module :mod:`netrc`
      Parser for the :file:`.netrc` file format.  The file :file:`.netrc` is
      typically used by FTP clients to load user authentication information
      before prompting the user.

.. _ftp-objects:

FTP Objects
-----------

Several methods are available in two flavors: one for handling text files and
another for binary files.  These are named for the command which is used
followed by ``lines`` for the text version or ``binary`` for the binary version.

:class:`FTP` instances have the following methods:

.. method:: FTP.set_debuglevel(level)

Set the instance's debugging level.  This controls the amount of debugging
   output printed.  The default, ``0``, produces no debugging output.  A value of
   ``1`` produces a moderate amount of debugging output, generally a single line
   per request.  A value of ``2`` or higher produces the maximum amount of
   debugging output, logging each line sent and received on the control connection.

.. method:: FTP.connect(host='', port=0, timeout=None, source_address=None)

Connect to the given host and port.  The default port number is ``21``, as
   specified by the FTP protocol specification.  It is rarely needed to specify a
   different port number.  This function should be called only once for each
   instance; it should not be called at all if a host was given when the instance
   was created.  All other methods can only be used after a connection has been
   made.
   The optional *timeout* parameter specifies a timeout in seconds for the
   connection attempt. If no *timeout* is passed, the global default timeout
   setting will be used.
   *source_address* is a 2-tuple ``(host, port)`` for the socket to bind to as
   its source address before connecting.

.. versionchanged:: 3.3
      *source_address* parameter was added.

.. method:: FTP.getwelcome()

Return the welcome message sent by the server in reply to the initial
   connection.  (This message sometimes contains disclaimers or help information
   that may be relevant to the user.)

.. method:: FTP.login(user='anonymous', passwd='', acct='')

Log in as the given *user*.  The *passwd* and *acct* parameters are optional and
   default to the empty string.  If no *user* is specified, it defaults to
   ``'anonymous'``.  If *user* is ``'anonymous'``, the default *passwd* is
   ``'anonymous@'``.  This function should be called only once for each instance,
   after a connection has been established; it should not be called at all if a
   host and user were given when the instance was created.  Most FTP commands are
   only allowed after the client has logged in.  The *acct* parameter supplies
   "accounting information"; few systems implement this.

.. method:: FTP.abort()

Abort a file transfer that is in progress.  Using this does not always work, but
   it's worth a try.

.. method:: FTP.sendcmd(cmd)

Send a simple command string to the server and return the response string.

.. method:: FTP.voidcmd(cmd)

Send a simple command string to the server and handle the response.  Return
   nothing if a response code corresponding to success (codes in the range
   200--299) is received.  Raise :exc:`error_reply` otherwise.

.. method:: FTP.retrbinary(cmd, callback, blocksize=8192, rest=None)

Retrieve a file in binary transfer mode.  *cmd* should be an appropriate
   ``RETR`` command: ``'RETR filename'``. The *callback* function is called for
   each block of data received, with a single bytes argument giving the data
   block. The optional *blocksize* argument specifies the maximum chunk size to
   read on the low-level socket object created to do the actual transfer (which
   will also be the largest size of the data blocks passed to *callback*).  A
   reasonable default is chosen. *rest* means the same thing as in the
   :meth:`transfercmd` method.

.. method:: FTP.retrlines(cmd, callback=None)

Retrieve a file or directory listing in ASCII transfer mode.  *cmd* should be
   an appropriate ``RETR`` command (see :meth:`retrbinary`) or a command such as
   ``LIST`` or ``NLST`` (usually just the string ``'LIST'``).
   ``LIST`` retrieves a list of files and information about those files.
   ``NLST`` retrieves a list of file names.
   The *callback* function is called for each line with a string argument
   containing the line with the trailing CRLF stripped.  The default *callback*
   prints the line to ``sys.stdout``.

.. method:: FTP.set_pasv(val)

Enable "passive" mode if *val* is true, otherwise disable passive mode.
   Passive mode is on by default.

.. method:: FTP.storbinary(cmd, fp, blocksize=8192, callback=None, rest=None)

Store a file in binary transfer mode.  *cmd* should be an appropriate
   ``STOR`` command: ``"STOR filename"``. *fp* is a :term:`file object`
   (opened in binary mode) which is read until EOF using its :meth:`~io.IOBase.read`
   method in blocks of size *blocksize* to provide the data to be stored.
   The *blocksize* argument defaults to 8192.  *callback* is an optional single
   parameter callable that is called on each block of data after it is sent.
   *rest* means the same thing as in the :meth:`transfercmd` method.

.. versionchanged:: 3.2
      *rest* parameter added.

.. method:: FTP.storlines(cmd, fp, callback=None)

Store a file in ASCII transfer mode.  *cmd* should be an appropriate
   ``STOR`` command (see :meth:`storbinary`).  Lines are read until EOF from the
   :term:`file object` *fp* (opened in binary mode) using its :meth:`~io.IOBase.readline`
   method to provide the data to be stored.  *callback* is an optional single
   parameter callable that is called on each line after it is sent.

.. method:: FTP.transfercmd(cmd, rest=None)

Initiate a transfer over the data connection.  If the transfer is active, send an
   ``EPRT`` or  ``PORT`` command and the transfer command specified by *cmd*, and
   accept the connection.  If the server is passive, send an ``EPSV`` or ``PASV``
   command, connect to it, and start the transfer command.  Either way, return the
   socket for the connection.

If optional *rest* is given, a ``REST`` command is sent to the server, passing
   *rest* as an argument.  *rest* is usually a byte offset into the requested file,
   telling the server to restart sending the file's bytes at the requested offset,
   skipping over the initial bytes.  Note however that :rfc:`959` requires only that
   *rest* be a string containing characters in the printable range from ASCII code
   33 to ASCII code 126.  The :meth:`transfercmd` method, therefore, converts
   *rest* to a string, but no check is performed on the string's contents.  If the
   server does not recognize the ``REST`` command, an :exc:`error_reply` exception
   will be raised.  If this happens, simply call :meth:`transfercmd` without a
   *rest* argument.

.. method:: FTP.ntransfercmd(cmd, rest=None)

Like :meth:`transfercmd`, but returns a tuple of the data connection and the
   expected size of the data.  If the expected size could not be computed, ``None``
   will be returned as the expected size.  *cmd* and *rest* means the same thing as
   in :meth:`transfercmd`.

.. method:: FTP.mlsd(path="", facts=[])

List a directory in a standardized format by using ``MLSD`` command
   (:rfc:`3659`).  If *path* is omitted the current directory is assumed.
   *facts* is a list of strings representing the type of information desired
   (e.g. ``["type", "size", "perm"]``).  Return a generator object yielding a
   tuple of two elements for every file found in path.  First element is the
   file name, the second one is a dictionary containing facts about the file
   name.  Content of this dictionary might be limited by the *facts* argument
   but server is not guaranteed to return all requested facts.

.. versionadded:: 3.3

.. method:: FTP.nlst(argument[, ...])

Return a list of file names as returned by the ``NLST`` command.  The
   optional *argument* is a directory to list (default is the current server
   directory).  Multiple arguments can be used to pass non-standard options to
   the ``NLST`` command.

.. note:: If your server supports the command, :meth:`mlsd` offers a better API.

.. method:: FTP.dir(argument[, ...])

Produce a directory listing as returned by the ``LIST`` command, printing it to
   standard output.  The optional *argument* is a directory to list (default is the
   current server directory).  Multiple arguments can be used to pass non-standard
   options to the ``LIST`` command.  If the last argument is a function, it is used
   as a *callback* function as for :meth:`retrlines`; the default prints to
   ``sys.stdout``.  This method returns ``None``.

.. note:: If your server supports the command, :meth:`mlsd` offers a better API.

.. method:: FTP.rename(fromname, toname)

Rename file *fromname* on the server to *toname*.

.. method:: FTP.delete(filename)

Remove the file named *filename* from the server.  If successful, returns the
   text of the response, otherwise raises :exc:`error_perm` on permission errors or
   :exc:`error_reply` on other errors.

.. method:: FTP.cwd(pathname)

Set the current directory on the server.

.. method:: FTP.mkd(pathname)

Create a new directory on the server.

.. method:: FTP.pwd()

Return the pathname of the current directory on the server.

.. method:: FTP.rmd(dirname)

Remove the directory named *dirname* on the server.

.. method:: FTP.size(filename)

Request the size of the file named *filename* on the server.  On success, the
   size of the file is returned as an integer, otherwise ``None`` is returned.
   Note that the ``SIZE`` command is not  standardized, but is supported by many
   common server implementations.

.. method:: FTP.quit()

Send a ``QUIT`` command to the server and close the connection. This is the
   "polite" way to close a connection, but it may raise an exception if the server
   responds with an error to the ``QUIT`` command.  This implies a call to the
   :meth:`close` method which renders the :class:`FTP` instance useless for
   subsequent calls (see below).

.. method:: FTP.close()

Close the connection unilaterally.  This should not be applied to an already
   closed connection such as after a successful call to :meth:`~FTP.quit`.
   After this call the :class:`FTP` instance should not be used any more (after
   a call to :meth:`close` or :meth:`~FTP.quit` you cannot reopen the
   connection by issuing another :meth:`login` method).

FTP_TLS Objects
---------------

:class:`FTP_TLS` class inherits from :class:`FTP`, defining these additional objects:

.. attribute:: FTP_TLS.ssl_version

The SSL version to use (defaults to :attr:`ssl.PROTOCOL_SSLv23`).

.. method:: FTP_TLS.auth()

Set up a secure control connection by using TLS or SSL, depending on what
   is specified in the :attr:`ssl_version` attribute.

.. versionchanged:: 3.4
      The method now supports hostname check with
      :attr:`ssl.SSLContext.check_hostname` and *Server Name Indication* (see
      :data:`ssl.HAS_SNI`).

.. method:: FTP_TLS.ccc()

Revert control channel back to plaintext.  This can be useful to take
   advantage of firewalls that know how to handle NAT with non-secure FTP
   without opening fixed ports.

.. versionadded:: 3.3

.. method:: FTP_TLS.prot_p()

Set up secure data connection.

.. method:: FTP_TLS.prot_c()

Set up clear text data connection.

:mod:`ftplib` --- FTP protocol client ===================================== .. module:: ftplib :synopsis: FTP protocol client (requires sockets). **Source code:** :source:`Lib/ftplib.py` .. index:: pair: FTP; protocol single: FTP; ftplib (standard module) -------------- This module defines the class :class:`FTP` and a few related items. The :class:`FTP` class implements the client side of the FTP protocol. You can use this to write Python programs that perform a variety of automated FTP jobs, such as mirroring other FTP servers. It is also used by the module :mod:`urllib.request` to handle URLs that use FTP. For more information on FTP (File Transfer Protocol), see Internet :rfc:`959`. Here's a sample session using the :mod:`ftplib` module:: >>> from ftplib import FTP >>> ftp = FTP('ftp.debian.org') # connect to host, default port >>> ftp.login() # user anonymous, passwd anonymous@ '230 Login successful.' >>> ftp.cwd('debian') # change into "debian" directory >>> ftp.retrlines('LIST') # list directory contents -rw-rw-r-- 1 1176 1176 1063 Jun 15 10:18 README ... drwxr-sr-x 5 1176 1176 4096 Dec 19 2000 pool drwxr-sr-x 4 1176 1176 4096 Nov 17 2008 project drwxr-xr-x 3 1176 1176 4096 Oct 10 2012 tools '226 Directory send OK.' >>> ftp.retrbinary('RETR README', open('README', 'wb').write) '226 Transfer complete.' >>> ftp.quit() The module defines the following items: .. class:: FTP(host='', user='', passwd='', acct='', timeout=None, source_address=None) Return a new instance of the :class:`FTP` class. When *host* is given, the method call ``connect(host)`` is made. When *user* is given, additionally the method call ``login(user, passwd, acct)`` is made (where *passwd* and *acct* default to the empty string when not given). The optional *timeout* parameter specifies a timeout in seconds for blocking operations like the connection attempt (if is not specified, the global default timeout setting will be used). *source_address* is a 2-tuple ``(host, port)`` for the socket to bind to as its source address before connecting. The :class:`FTP` class supports the :keyword:`with` statement, e.g.: >>> from ftplib import FTP >>> with FTP("ftp1.at.proftpd.org") as ftp: ... ftp.login() ... ftp.dir() ... # doctest: +SKIP '230 Anonymous login ok, restrictions apply.' dr-xr-xr-x 9 ftp ftp 154 May 6 10:43 . dr-xr-xr-x 9 ftp ftp 154 May 6 10:43 .. dr-xr-xr-x 5 ftp ftp 4096 May 6 10:43 CentOS dr-xr-xr-x 3 ftp ftp 18 Jul 10 2008 Fedora >>> .. versionchanged:: 3.2 Support for the :keyword:`with` statement was added. .. versionchanged:: 3.3 *source_address* parameter was added. .. class:: FTP_TLS(host='', user='', passwd='', acct='', keyfile=None, certfile=None, context=None, timeout=None, source_address=None) A :class:`FTP` subclass which adds TLS support to FTP as described in :rfc:`4217`. Connect as usual to port 21 implicitly securing the FTP control connection before authenticating. Securing the data connection requires the user to explicitly ask for it by calling the :meth:`prot_p` method. *context* is a :class:`ssl.SSLContext` object which allows bundling SSL configuration options, certificates and private keys into a single (potentially long-lived) structure. Please read :ref:`ssl-security` for best practices. *keyfile* and *certfile* are a legacy alternative to *context* -- they can point to PEM-formatted private key and certificate chain files (respectively) for the SSL connection. .. versionadded:: 3.2 .. versionchanged:: 3.3 *source_address* parameter was added. .. versionchanged:: 3.4 The class now supports hostname check with :attr:`ssl.SSLContext.check_hostname` and *Server Name Indication* (see :data:`ssl.HAS_SNI`). .. deprecated:: 3.6 *keyfile* and *certfile* are deprecated in favor of *context*. Please use :meth:`ssl.SSLContext.load_cert_chain` instead, or let :func:`ssl.create_default_context` select the system's trusted CA certificates for you. Here's a sample session using the :class:`FTP_TLS` class:: >>> ftps = FTP_TLS('ftp.pureftpd.org') >>> ftps.login() '230 Anonymous user logged in' >>> ftps.prot_p() '200 Data protection level set to "private"' >>> ftps.nlst() ['6jack', 'OpenBSD', 'antilink', 'blogbench', 'bsdcam', 'clockspeed', 'djbdns-jedi', 'docs', 'eaccelerator-jedi', 'favicon.ico', 'francotone', 'fugu', 'ignore', 'libpuzzle', 'metalog', 'minidentd', 'misc', 'mysql-udf-global-user-variables', 'php-jenkins-hash', 'php-skein-hash', 'php-webdav', 'phpaudit', 'phpbench', 'pincaster', 'ping', 'posto', 'pub', 'public', 'public_keys', 'pure-ftpd', 'qscan', 'qtc', 'sharedance', 'skycache', 'sound', 'tmp', 'ucarp'] .. exception:: error_reply Exception raised when an unexpected reply is received from the server. .. exception:: error_temp Exception raised when an error code signifying a temporary error (response codes in the range 400--499) is received. .. exception:: error_perm Exception raised when an error code signifying a permanent error (response codes in the range 500--599) is received. .. exception:: error_proto Exception raised when a reply is received from the server that does not fit the response specifications of the File Transfer Protocol, i.e. begin with a digit in the range 1--5. .. data:: all_errors The set of all exceptions (as a tuple) that methods of :class:`FTP` instances may raise as a result of problems with the FTP connection (as opposed to programming errors made by the caller). This set includes the four exceptions listed above as well as :exc:`OSError`. .. seealso:: Module :mod:`netrc` Parser for the :file:`.netrc` file format. The file :file:`.netrc` is typically used by FTP clients to load user authentication information before prompting the user. .. _ftp-objects: FTP Objects ----------- Several methods are available in two flavors: one for handling text files and another for binary files. These are named for the command which is used followed by ``lines`` for the text version or ``binary`` for the binary version. :class:`FTP` instances have the following methods: .. method:: FTP.set_debuglevel(level) Set the instance's debugging level. This controls the amount of debugging output printed. The default, ``0``, produces no debugging output. A value of ``1`` produces a moderate amount of debugging output, generally a single line per request. A value of ``2`` or higher produces the maximum amount of debugging output, logging each line sent and received on the control connection. .. method:: FTP.connect(host='', port=0, timeout=None, source_address=None) Connect to the given host and port. The default port number is ``21``, as specified by the FTP protocol specification. It is rarely needed to specify a different port number. This function should be called only once for each instance; it should not be called at all if a host was given when the instance was created. All other methods can only be used after a connection has been made. The optional *timeout* parameter specifies a timeout in seconds for the connection attempt. If no *timeout* is passed, the global default timeout setting will be used. *source_address* is a 2-tuple ``(host, port)`` for the socket to bind to as its source address before connecting. .. versionchanged:: 3.3 *source_address* parameter was added. .. method:: FTP.getwelcome() Return the welcome message sent by the server in reply to the initial connection. (This message sometimes contains disclaimers or help information that may be relevant to the user.) .. method:: FTP.login(user='anonymous', passwd='', acct='') Log in as the given *user*. The *passwd* and *acct* parameters are optional and default to the empty string. If no *user* is specified, it defaults to ``'anonymous'``. If *user* is ``'anonymous'``, the default *passwd* is ``'anonymous@'``. This function should be called only once for each instance, after a connection has been established; it should not be called at all if a host and user were given when the instance was created. Most FTP commands are only allowed after the client has logged in. The *acct* parameter supplies "accounting information"; few systems implement this. .. method:: FTP.abort() Abort a file transfer that is in progress. Using this does not always work, but it's worth a try. .. method:: FTP.sendcmd(cmd) Send a simple command string to the server and return the response string. .. method:: FTP.voidcmd(cmd) Send a simple command string to the server and handle the response. Return nothing if a response code corresponding to success (codes in the range 200--299) is received. Raise :exc:`error_reply` otherwise. .. method:: FTP.retrbinary(cmd, callback, blocksize=8192, rest=None) Retrieve a file in binary transfer mode. *cmd* should be an appropriate ``RETR`` command: ``'RETR filename'``. The *callback* function is called for each block of data received, with a single bytes argument giving the data block. The optional *blocksize* argument specifies the maximum chunk size to read on the low-level socket object created to do the actual transfer (which will also be the largest size of the data blocks passed to *callback*). A reasonable default is chosen. *rest* means the same thing as in the :meth:`transfercmd` method. .. method:: FTP.retrlines(cmd, callback=None) Retrieve a file or directory listing in ASCII transfer mode. *cmd* should be an appropriate ``RETR`` command (see :meth:`retrbinary`) or a command such as ``LIST`` or ``NLST`` (usually just the string ``'LIST'``). ``LIST`` retrieves a list of files and information about those files. ``NLST`` retrieves a list of file names. The *callback* function is called for each line with a string argument containing the line with the trailing CRLF stripped. The default *callback* prints the line to ``sys.stdout``. .. method:: FTP.set_pasv(val) Enable "passive" mode if *val* is true, otherwise disable passive mode. Passive mode is on by default. .. method:: FTP.storbinary(cmd, fp, blocksize=8192, callback=None, rest=None) Store a file in binary transfer mode. *cmd* should be an appropriate ``STOR`` command: ``"STOR filename"``. *fp* is a :term:`file object` (opened in binary mode) which is read until EOF using its :meth:`~io.IOBase.read` method in blocks of size *blocksize* to provide the data to be stored. The *blocksize* argument defaults to 8192. *callback* is an optional single parameter callable that is called on each block of data after it is sent. *rest* means the same thing as in the :meth:`transfercmd` method. .. versionchanged:: 3.2 *rest* parameter added. .. method:: FTP.storlines(cmd, fp, callback=None) Store a file in ASCII transfer mode. *cmd* should be an appropriate ``STOR`` command (see :meth:`storbinary`). Lines are read until EOF from the :term:`file object` *fp* (opened in binary mode) using its :meth:`~io.IOBase.readline` method to provide the data to be stored. *callback* is an optional single parameter callable that is called on each line after it is sent. .. method:: FTP.transfercmd(cmd, rest=None) Initiate a transfer over the data connection. If the transfer is active, send an ``EPRT`` or ``PORT`` command and the transfer command specified by *cmd*, and accept the connection. If the server is passive, send an ``EPSV`` or ``PASV`` command, connect to it, and start the transfer command. Either way, return the socket for the connection. If optional *rest* is given, a ``REST`` command is sent to the server, passing *rest* as an argument. *rest* is usually a byte offset into the requested file, telling the server to restart sending the file's bytes at the requested offset, skipping over the initial bytes. Note however that :rfc:`959` requires only that *rest* be a string containing characters in the printable range from ASCII code 33 to ASCII code 126. The :meth:`transfercmd` method, therefore, converts *rest* to a string, but no check is performed on the string's contents. If the server does not recognize the ``REST`` command, an :exc:`error_reply` exception will be raised. If this happens, simply call :meth:`transfercmd` without a *rest* argument. .. method:: FTP.ntransfercmd(cmd, rest=None) Like :meth:`transfercmd`, but returns a tuple of the data connection and the expected size of the data. If the expected size could not be computed, ``None`` will be returned as the expected size. *cmd* and *rest* means the same thing as in :meth:`transfercmd`. .. method:: FTP.mlsd(path="", facts=[]) List a directory in a standardized format by using ``MLSD`` command (:rfc:`3659`). If *path* is omitted the current directory is assumed. *facts* is a list of strings representing the type of information desired (e.g. ``["type", "size", "perm"]``). Return a generator object yielding a tuple of two elements for every file found in path. First element is the file name, the second one is a dictionary containing facts about the file name. Content of this dictionary might be limited by the *facts* argument but server is not guaranteed to return all requested facts. .. versionadded:: 3.3 .. method:: FTP.nlst(argument[, ...]) Return a list of file names as returned by the ``NLST`` command. The optional *argument* is a directory to list (default is the current server directory). Multiple arguments can be used to pass non-standard options to the ``NLST`` command. .. note:: If your server supports the command, :meth:`mlsd` offers a better API. .. method:: FTP.dir(argument[, ...]) Produce a directory listing as returned by the ``LIST`` command, printing it to standard output. The optional *argument* is a directory to list (default is the current server directory). Multiple arguments can be used to pass non-standard options to the ``LIST`` command. If the last argument is a function, it is used as a *callback* function as for :meth:`retrlines`; the default prints to ``sys.stdout``. This method returns ``None``. .. note:: If your server supports the command, :meth:`mlsd` offers a better API. .. method:: FTP.rename(fromname, toname) Rename file *fromname* on the server to *toname*. .. method:: FTP.delete(filename) Remove the file named *filename* from the server. If successful, returns the text of the response, otherwise raises :exc:`error_perm` on permission errors or :exc:`error_reply` on other errors. .. method:: FTP.cwd(pathname) Set the current directory on the server. .. method:: FTP.mkd(pathname) Create a new directory on the server. .. method:: FTP.pwd() Return the pathname of the current directory on the server. .. method:: FTP.rmd(dirname) Remove the directory named *dirname* on the server. .. method:: FTP.size(filename) Request the size of the file named *filename* on the server. On success, the size of the file is returned as an integer, otherwise ``None`` is returned. Note that the ``SIZE`` command is not standardized, but is supported by many common server implementations. .. method:: FTP.quit() Send a ``QUIT`` command to the server and close the connection. This is the "polite" way to close a connection, but it may raise an exception if the server responds with an error to the ``QUIT`` command. This implies a call to the :meth:`close` method which renders the :class:`FTP` instance useless for subsequent calls (see below). .. method:: FTP.close() Close the connection unilaterally. This should not be applied to an already closed connection such as after a successful call to :meth:`~FTP.quit`. After this call the :class:`FTP` instance should not be used any more (after a call to :meth:`close` or :meth:`~FTP.quit` you cannot reopen the connection by issuing another :meth:`login` method). FTP_TLS Objects --------------- :class:`FTP_TLS` class inherits from :class:`FTP`, defining these additional objects: .. attribute:: FTP_TLS.ssl_version The SSL version to use (defaults to :attr:`ssl.PROTOCOL_SSLv23`). .. method:: FTP_TLS.auth() Set up a secure control connection by using TLS or SSL, depending on what is specified in the :attr:`ssl_version` attribute. .. versionchanged:: 3.4 The method now supports hostname check with :attr:`ssl.SSLContext.check_hostname` and *Server Name Indication* (see :data:`ssl.HAS_SNI`). .. method:: FTP_TLS.ccc() Revert control channel back to plaintext. This can be useful to take advantage of firewalls that know how to handle NAT with non-secure FTP without opening fixed ports. .. versionadded:: 3.3 .. method:: FTP_TLS.prot_p() Set up secure data connection. .. method:: FTP_TLS.prot_c() Set up clear text data connection.