FM / library

/usr/share/doc/python3-docs/html/_sources/library/

/usr/share/doc/python3-docs/html/_sources/library

Name	Size	Mode	Actions
2to3.rst.txt	15898	0644	edit dl rm
abc.rst.txt	11805	0644	edit dl rm
aifc.rst.txt	7503	0644	edit dl rm
allos.rst.txt	678	0644	edit dl rm
archiving.rst.txt	440	0644	edit dl rm
argparse.rst.txt	77480	0644	edit dl rm
array.rst.txt	10812	0644	edit dl rm
ast.rst.txt	10159	0644	edit dl rm
asynchat.rst.txt	8528	0644	edit dl rm
asyncio-dev.rst.txt	13398	0644	edit dl rm
asyncio-eventloop.rst.txt	33701	0644	edit dl rm
asyncio-eventloops.rst.txt	7660	0644	edit dl rm
asyncio-protocol.rst.txt	25170	0644	edit dl rm
asyncio-queue.rst.txt	4328	0644	edit dl rm
asyncio-stream.rst.txt	14363	0644	edit dl rm
asyncio-subprocess.rst.txt	15544	0644	edit dl rm
asyncio-sync.rst.txt	9078	0644	edit dl rm
asyncio-task.rst.txt	25406	0644	edit dl rm
asyncio.rst.txt	2272	0644	edit dl rm
asyncore.rst.txt	13624	0644	edit dl rm
atexit.rst.txt	3669	0644	edit dl rm
audioop.rst.txt	10712	0644	edit dl rm
base64.rst.txt	10371	0644	edit dl rm
bdb.rst.txt	12985	0644	edit dl rm
binary.rst.txt	654	0644	edit dl rm
binascii.rst.txt	6539	0644	edit dl rm
binhex.rst.txt	1709	0644	edit dl rm
bisect.rst.txt	5398	0644	edit dl rm
builtins.rst.txt	1465	0644	edit dl rm
bz2.rst.txt	8825	0644	edit dl rm
calendar.rst.txt	10988	0644	edit dl rm
cgi.rst.txt	22650	0644	edit dl rm
cgitb.rst.txt	2918	0644	edit dl rm
chunk.rst.txt	5094	0644	edit dl rm
cmath.rst.txt	9326	0644	edit dl rm
cmd.rst.txt	13795	0644	edit dl rm
code.rst.txt	7817	0644	edit dl rm
codecs.rst.txt	75564	0644	edit dl rm
codeop.rst.txt	3021	0644	edit dl rm
collections.abc.rst.txt	12861	0644	edit dl rm
collections.rst.txt	46063	0644	edit dl rm
colorsys.rst.txt	1820	0644	edit dl rm
compileall.rst.txt	8975	0644	edit dl rm
concurrency.rst.txt	673	0644	edit dl rm
concurrent.futures.rst.txt	16910	0644	edit dl rm
concurrent.rst.txt	171	0644	edit dl rm
configparser.rst.txt	48756	0644	edit dl rm
constants.rst.txt	3331	0644	edit dl rm
contextlib.rst.txt	28175	0644	edit dl rm
copy.rst.txt	3378	0644	edit dl rm
copyreg.rst.txt	2182	0644	edit dl rm
crypt.rst.txt	5122	0644	edit dl rm
crypto.rst.txt	411	0644	edit dl rm
csv.rst.txt	19902	0644	edit dl rm
ctypes.rst.txt	88613	0644	edit dl rm
curses.ascii.rst.txt	8920	0644	edit dl rm
curses.panel.rst.txt	2764	0644	edit dl rm
curses.rst.txt	76397	0644	edit dl rm
custominterp.rst.txt	569	0644	edit dl rm
datatypes.rst.txt	751	0644	edit dl rm
datetime.rst.txt	90524	0644	edit dl rm
dbm.rst.txt	14293	0644	edit dl rm
debug.rst.txt	471	0644	edit dl rm
decimal.rst.txt	74869	0644	edit dl rm
development.rst.txt	704	0644	edit dl rm
difflib.rst.txt	29861	0644	edit dl rm
dis.rst.txt	32567	0644	edit dl rm
distribution.rst.txt	452	0644	edit dl rm
distutils.rst.txt	1974	0644	edit dl rm
doctest.rst.txt	71743	0644	edit dl rm
dummy_threading.rst.txt	784	0644	edit dl rm
email.charset.rst.txt	9293	0644	edit dl rm
email.compat32-message.rst.txt	33493	0644	edit dl rm
email.contentmanager.rst.txt	9112	0644	edit dl rm
email.encoders.rst.txt	2715	0644	edit dl rm
email.errors.rst.txt	4792	0644	edit dl rm
email.examples.rst.txt	1915	0644	edit dl rm
email.generator.rst.txt	13637	0644	edit dl rm
email.header.rst.txt	9188	0644	edit dl rm
email.headerregistry.rst.txt	17957	0644	edit dl rm
email.iterators.rst.txt	2795	0644	edit dl rm
email.message.rst.txt	33008	0644	edit dl rm
email.mime.rst.txt	11721	0644	edit dl rm
email.parser.rst.txt	14092	0644	edit dl rm
email.policy.rst.txt	27022	0644	edit dl rm
email.rst.txt	6785	0644	edit dl rm
email.util.rst.txt	9214	0644	edit dl rm
ensurepip.rst.txt	4987	0644	edit dl rm
enum.rst.txt	32751	0644	edit dl rm
errno.rst.txt	6811	0644	edit dl rm
exceptions.rst.txt	25570	0644	edit dl rm
faulthandler.rst.txt	6136	0644	edit dl rm
fcntl.rst.txt	7152	0644	edit dl rm
filecmp.rst.txt	5623	0644	edit dl rm
fileformats.rst.txt	287	0644	edit dl rm
fileinput.rst.txt	8051	0644	edit dl rm
filesys.rst.txt	961	0644	edit dl rm
fnmatch.rst.txt	3103	0644	edit dl rm
formatter.rst.txt	13242	0644	edit dl rm
fpectl.rst.txt	4180	0644	edit dl rm
fractions.rst.txt	6364	0644	edit dl rm
frameworks.rst.txt	391	0644	edit dl rm
ftplib.rst.txt	17552	0644	edit dl rm
functional.rst.txt	365	0644	edit dl rm
functions.rst.txt	71621	0644	edit dl rm
functools.rst.txt	18503	0644	edit dl rm
gc.rst.txt	9694	0644	edit dl rm
getopt.rst.txt	6557	0644	edit dl rm
getpass.rst.txt	1882	0644	edit dl rm
gettext.rst.txt	25588	0644	edit dl rm
glob.rst.txt	3508	0644	edit dl rm
grp.rst.txt	2417	0644	edit dl rm
gzip.rst.txt	8301	0644	edit dl rm
hashlib.rst.txt	26523	0644	edit dl rm
heapq.rst.txt	13402	0644	edit dl rm
hmac.rst.txt	4020	0644	edit dl rm
html.entities.rst.txt	1319	0644	edit dl rm
html.parser.rst.txt	11275	0644	edit dl rm
html.rst.txt	1304	0644	edit dl rm
http.client.rst.txt	18870	0644	edit dl rm
http.cookiejar.rst.txt	27832	0644	edit dl rm
http.cookies.rst.txt	8645	0644	edit dl rm
http.rst.txt	7096	0644	edit dl rm
http.server.rst.txt	17639	0644	edit dl rm
i18n.rst.txt	408	0644	edit dl rm
idle.rst.txt	25834	0644	edit dl rm
imaplib.rst.txt	20367	0644	edit dl rm
imghdr.rst.txt	2938	0644	edit dl rm
imp.rst.txt	15548	0644	edit dl rm
importlib.rst.txt	53563	0644	edit dl rm
index.rst.txt	2258	0644	edit dl rm
inspect.rst.txt	53928	0644	edit dl rm
internet.rst.txt	992	0644	edit dl rm
intro.rst.txt	2645	0644	edit dl rm
io.rst.txt	40328	0644	edit dl rm
ipaddress.rst.txt	32340	0644	edit dl rm
ipc.rst.txt	649	0644	edit dl rm
itertools.rst.txt	38459	0644	edit dl rm
json.rst.txt	27876	0644	edit dl rm
keyword.rst.txt	617	0644	edit dl rm
language.rst.txt	522	0644	edit dl rm
linecache.rst.txt	2408	0644	edit dl rm
locale.rst.txt	25470	0644	edit dl rm
logging.config.rst.txt	33886	0644	edit dl rm
logging.handlers.rst.txt	42497	0644	edit dl rm
logging.rst.txt	60479	0644	edit dl rm
lzma.rst.txt	17361	0644	edit dl rm
macpath.rst.txt	707	0644	edit dl rm
mailbox.rst.txt	63055	0644	edit dl rm
mailcap.rst.txt	3691	0644	edit dl rm
markup.rst.txt	679	0644	edit dl rm
marshal.rst.txt	4855	0644	edit dl rm
math.rst.txt	14375	0644	edit dl rm
mimetypes.rst.txt	9839	0644	edit dl rm
misc.rst.txt	247	0644	edit dl rm
mm.rst.txt	431	0644	edit dl rm
mmap.rst.txt	11232	0644	edit dl rm
modulefinder.rst.txt	3240	0644	edit dl rm
modules.rst.txt	355	0644	edit dl rm
msilib.rst.txt	18612	0644	edit dl rm
msvcrt.rst.txt	4392	0644	edit dl rm
multiprocessing.rst.txt	104494	0644	edit dl rm
netdata.rst.txt	339	0644	edit dl rm
netrc.rst.txt	3007	0644	edit dl rm
nis.rst.txt	1993	0644	edit dl rm
nntplib.rst.txt	21821	0644	edit dl rm
numbers.rst.txt	8089	0644	edit dl rm
numeric.rst.txt	696	0644	edit dl rm
operator.rst.txt	18989	0644	edit dl rm
optparse.rst.txt	76996	0644	edit dl rm
os.path.rst.txt	16419	0644	edit dl rm
os.rst.txt	137534	0644	edit dl rm
ossaudiodev.rst.txt	17845	0644	edit dl rm
othergui.rst.txt	2822	0644	edit dl rm
parser.rst.txt	15148	0644	edit dl rm
pathlib.rst.txt	30045	0644	edit dl rm
pdb.rst.txt	19454	0644	edit dl rm
persistence.rst.txt	591	0644	edit dl rm
pickle.rst.txt	37440	0644	edit dl rm
pickletools.rst.txt	3729	0644	edit dl rm
pipes.rst.txt	2557	0644	edit dl rm
pkgutil.rst.txt	8730	0644	edit dl rm
platform.rst.txt	9624	0644	edit dl rm
plistlib.rst.txt	7398	0644	edit dl rm
poplib.rst.txt	8197	0644	edit dl rm
posix.rst.txt	3694	0644	edit dl rm
pprint.rst.txt	14274	0644	edit dl rm
profile.rst.txt	27969	0644	edit dl rm
pty.rst.txt	3123	0644	edit dl rm
pwd.rst.txt	2739	0644	edit dl rm
pyclbr.rst.txt	3297	0644	edit dl rm
pydoc.rst.txt	4688	0644	edit dl rm
pyexpat.rst.txt	28620	0644	edit dl rm
python.rst.txt	475	0644	edit dl rm
py_compile.rst.txt	3851	0644	edit dl rm
queue.rst.txt	7268	0644	edit dl rm
quopri.rst.txt	2571	0644	edit dl rm
random.rst.txt	18503	0644	edit dl rm
re.rst.txt	64936	0644	edit dl rm
readline.rst.txt	11943	0644	edit dl rm
reprlib.rst.txt	5162	0644	edit dl rm
resource.rst.txt	12291	0644	edit dl rm
rlcompleter.rst.txt	2294	0644	edit dl rm
runpy.rst.txt	8285	0644	edit dl rm
sched.rst.txt	4842	0644	edit dl rm
secrets.rst.txt	5930	0644	edit dl rm
select.rst.txt	28175	0644	edit dl rm
selectors.rst.txt	8925	0644	edit dl rm
shelve.rst.txt	8390	0644	edit dl rm
shlex.rst.txt	16441	0644	edit dl rm
shutil.rst.txt	26014	0644	edit dl rm
signal.rst.txt	17218	0644	edit dl rm
site.rst.txt	9628	0644	edit dl rm
smtpd.rst.txt	10806	0644	edit dl rm
smtplib.rst.txt	23439	0644	edit dl rm
sndhdr.rst.txt	1994	0644	edit dl rm
socket.rst.txt	68202	0644	edit dl rm
socketserver.rst.txt	23712	0644	edit dl rm
spwd.rst.txt	2958	0644	edit dl rm
sqlite3.rst.txt	39215	0644	edit dl rm
ssl.rst.txt	96021	0644	edit dl rm
stat.rst.txt	9805	0644	edit dl rm
statistics.rst.txt	15301	0644	edit dl rm
stdtypes.rst.txt	179240	0644	edit dl rm
string.rst.txt	35374	0644	edit dl rm
stringprep.rst.txt	4279	0644	edit dl rm
struct.rst.txt	19581	0644	edit dl rm
subprocess.rst.txt	45793	0644	edit dl rm
sunau.rst.txt	7390	0644	edit dl rm
superseded.rst.txt	258	0644	edit dl rm
symbol.rst.txt	975	0644	edit dl rm
symtable.rst.txt	4964	0644	edit dl rm
sys.rst.txt	58273	0644	edit dl rm
sysconfig.rst.txt	8749	0644	edit dl rm
syslog.rst.txt	4302	0644	edit dl rm
tabnanny.rst.txt	2007	0644	edit dl rm
tarfile.rst.txt	31749	0644	edit dl rm
telnetlib.rst.txt	7899	0644	edit dl rm
tempfile.rst.txt	13857	0644	edit dl rm
termios.rst.txt	3751	0644	edit dl rm
test.rst.txt	25764	0644	edit dl rm
text.rst.txt	584	0644	edit dl rm
textwrap.rst.txt	10519	0644	edit dl rm
threading.rst.txt	39257	0644	edit dl rm
time.rst.txt	32967	0644	edit dl rm
timeit.rst.txt	13000	0644	edit dl rm
tk.rst.txt	1639	0644	edit dl rm
tkinter.rst.txt	33027	0644	edit dl rm
tkinter.scrolledtext.rst.txt	1255	0644	edit dl rm
tkinter.tix.rst.txt	22653	0644	edit dl rm
tkinter.ttk.rst.txt	58489	0644	edit dl rm
token.rst.txt	2607	0644	edit dl rm
tokenize.rst.txt	10002	0644	edit dl rm
trace.rst.txt	6914	0644	edit dl rm
traceback.rst.txt	17854	0644	edit dl rm
tracemalloc.rst.txt	22089	0644	edit dl rm
tty.rst.txt	1097	0644	edit dl rm
turtle.rst.txt	71221	0644	edit dl rm
types.rst.txt	9999	0644	edit dl rm
typing.rst.txt	34332	0644	edit dl rm
undoc.rst.txt	780	0644	edit dl rm
unicodedata.rst.txt	5762	0644	edit dl rm
unittest.mock-examples.rst.txt	46206	0644	edit dl rm
unittest.mock.rst.txt	85991	0644	edit dl rm
unittest.rst.txt	93304	0644	edit dl rm
unix.rst.txt	446	0644	edit dl rm
urllib.error.rst.txt	2199	0644	edit dl rm
urllib.parse.rst.txt	27332	0644	edit dl rm
urllib.request.rst.txt	59360	0644	edit dl rm
urllib.robotparser.rst.txt	2969	0644	edit dl rm
urllib.rst.txt	466	0644	edit dl rm
uu.rst.txt	2387	0644	edit dl rm
uuid.rst.txt	8760	0644	edit dl rm
venv.rst.txt	20621	0644	edit dl rm
warnings.rst.txt	20152	0644	edit dl rm
wave.rst.txt	6870	0644	edit dl rm
weakref.rst.txt	21328	0644	edit dl rm
webbrowser.rst.txt	9783	0644	edit dl rm
windows.rst.txt	272	0644	edit dl rm
winreg.rst.txt	24073	0644	edit dl rm
winsound.rst.txt	5134	0644	edit dl rm
wsgiref.rst.txt	33047	0644	edit dl rm
xdrlib.rst.txt	8078	0644	edit dl rm
xml.dom.minidom.rst.txt	10198	0644	edit dl rm
xml.dom.pulldom.rst.txt	5186	0644	edit dl rm
xml.dom.rst.txt	39507	0644	edit dl rm
xml.etree.elementtree.rst.txt	43871	0644	edit dl rm
xml.rst.txt	6071	0644	edit dl rm
xml.sax.handler.rst.txt	15399	0644	edit dl rm
xml.sax.reader.rst.txt	12133	0644	edit dl rm
xml.sax.rst.txt	7159	0644	edit dl rm
xml.sax.utils.rst.txt	3901	0644	edit dl rm
xmlrpc.client.rst.txt	23071	0644	edit dl rm
xmlrpc.rst.txt	475	0644	edit dl rm
xmlrpc.server.rst.txt	14990	0644	edit dl rm
zipapp.rst.txt	17392	0644	edit dl rm
zipfile.rst.txt	24005	0644	edit dl rm
zipimport.rst.txt	5805	0644	edit dl rm
zlib.rst.txt	13912	0644	edit dl rm
_dummy_thread.rst.txt	762	0644	edit dl rm
_thread.rst.txt	6886	0644	edit dl rm
__future__.rst.txt	5245	0644	edit dl rm
__main__.rst.txt	904	0644	edit dl rm

Edit: /usr/share/doc/python3-docs/html/_sources/library/idle.rst.txt (25834B)

.. _idle:

IDLE
====

.. moduleauthor:: Guido van Rossum <guido@python.org>

**Source code:** :source:`Lib/idlelib/`

.. index::
   single: IDLE
   single: Python Editor
   single: Integrated Development Environment

--------------

IDLE is Python's Integrated Development and Learning Environment.

IDLE has the following features:

* coded in 100% pure Python, using the :mod:`tkinter` GUI toolkit

* cross-platform: works mostly the same on Windows, Unix, and Mac OS X

* Python shell window (interactive interpreter) with colorizing
  of code input, output, and error messages

* multi-window text editor with multiple undo, Python colorizing,
  smart indent, call tips, auto completion, and other features

* search within any window, replace within editor windows, and search
  through multiple files (grep)

* debugger with persistent breakpoints, stepping, and viewing
  of global and local namespaces

* configuration, browsers, and other dialogs

Menus
-----

IDLE has two main window types, the Shell window and the Editor window.  It is
possible to have multiple editor windows simultaneously.  Output windows, such
as used for Edit / Find in Files, are a subtype of edit window.  They currently
have the same top menu as Editor windows but a different default title and
context menu.

IDLE's menus dynamically change based on which window is currently selected.
Each menu documented below indicates which window type it is associated with.

File menu (Shell and Editor)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^

New File
   Create a new file editing window.

Open...
   Open an existing file with an Open dialog.

Recent Files
   Open a list of recent files.  Click one to open it.

Open Module...
   Open an existing module (searches sys.path).

.. index::
   single: Class browser
   single: Path browser

Class Browser
   Show functions, classes, and methods in the current Editor file in a
   tree structure.  In the shell, open a module first.

Path Browser
   Show sys.path directories, modules, functions, classes and methods in a
   tree structure.

Save
   Save the current window to the associated file, if there is one.  Windows
   that have been changed since being opened or last saved have a \* before
   and after the window title.  If there is no associated file,
   do Save As instead.

Save As...
   Save the current window with a Save As dialog.  The file saved becomes the
   new associated file for the window.

Save Copy As...
   Save the current window to different file without changing the associated
   file.

Print Window
   Print the current window to the default printer.

Close
   Close the current window (ask to save if unsaved).

Exit
   Close all windows and quit IDLE (ask to save unsaved windows).

Edit menu (Shell and Editor)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Undo
   Undo the last change to the current window.  A maximum of 1000 changes may
   be undone.

Redo
   Redo the last undone change to the current window.

Cut
   Copy selection into the system-wide clipboard; then delete the selection.

Copy
   Copy selection into the system-wide clipboard.

Paste
   Insert contents of the system-wide clipboard into the current window.

The clipboard functions are also available in context menus.

Select All
   Select the entire contents of the current window.

Find...
   Open a search dialog with many options

Find Again
   Repeat the last search, if there is one.

Find Selection
   Search for the currently selected string, if there is one.

Find in Files...
   Open a file search dialog.  Put results in a new output window.

Replace...
   Open a search-and-replace dialog.

Go to Line
   Move cursor to the line number requested and make that line visible.

Show Completions
   Open a scrollable list allowing selection of keywords and attributes. See
   Completions in the Tips sections below.

Expand Word
   Expand a prefix you have typed to match a full word in the same window;
   repeat to get a different expansion.

Show call tip
   After an unclosed parenthesis for a function, open a small window with
   function parameter hints.

Show surrounding parens
   Highlight the surrounding parenthesis.

Format menu (Editor window only)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Indent Region
   Shift selected lines right by the indent width (default 4 spaces).

Dedent Region
   Shift selected lines left by the indent width (default 4 spaces).

Comment Out Region
   Insert ## in front of selected lines.

Uncomment Region
   Remove leading # or ## from selected lines.

Tabify Region
   Turn *leading* stretches of spaces into tabs. (Note: We recommend using
   4 space blocks to indent Python code.)

Untabify Region
   Turn *all* tabs into the correct number of spaces.

Toggle Tabs
   Open a dialog to switch between indenting with spaces and tabs.

New Indent Width
   Open a dialog to change indent width. The accepted default by the Python
   community is 4 spaces.

Format Paragraph
   Reformat the current blank-line-delimited paragraph in comment block or
   multiline string or selected line in a string.  All lines in the
   paragraph will be formatted to less than N columns, where N defaults to 72.

Strip trailing whitespace
   Remove trailing space and other whitespace characters after the last
   non-whitespace character of a line by applying str.rstrip to each line,
   including lines within multiline strings.

.. index::
   single: Run script

Run menu (Editor window only)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Python Shell
   Open or wake up the Python Shell window.

Check Module
   Check the syntax of the module currently open in the Editor window. If the
   module has not been saved IDLE will either prompt the user to save or
   autosave, as selected in the General tab of the Idle Settings dialog.  If
   there is a syntax error, the approximate location is indicated in the
   Editor window.

Run Module
   Do Check Module (above).  If no error, restart the shell to clean the
   environment, then execute the module.  Output is displayed in the Shell
   window.  Note that output requires use of ``print`` or ``write``.
   When execution is complete, the Shell retains focus and displays a prompt.
   At this point, one may interactively explore the result of execution.
   This is similar to executing a file with ``python -i file`` at a command
   line.

Shell menu (Shell window only)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

View Last Restart
  Scroll the shell window to the last Shell restart.

Restart Shell
  Restart the shell to clean the environment.

Interrupt Execution
  Stop a running program.

Debug menu (Shell window only)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Go to File/Line
   Look on the current line. with the cursor, and the line above for a filename
   and line number.  If found, open the file if not already open, and show the
   line.  Use this to view source lines referenced in an exception traceback
   and lines found by Find in Files. Also available in the context menu of
   the Shell window and Output windows.

.. index::
   single: debugger
   single: stack viewer

Debugger (toggle)
   When activated, code entered in the Shell or run from an Editor will run
   under the debugger.  In the Editor, breakpoints can be set with the context
   menu.  This feature is still incomplete and somewhat experimental.

Stack Viewer
   Show the stack traceback of the last exception in a tree widget, with
   access to locals and globals.

Auto-open Stack Viewer
   Toggle automatically opening the stack viewer on an unhandled exception.

Options menu (Shell and Editor)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Configure IDLE
   Open a configuration dialog and change preferences for the following:
   fonts, indentation, keybindings, text color themes, startup windows and
   size, additional help sources, and extensions (see below).  On OS X,
   open the configuration dialog by selecting Preferences in the application
   menu.  To use a new built-in color theme (IDLE Dark) with older IDLEs,
   save it as a new custom theme.

Non-default user settings are saved in a .idlerc directory in the user's
   home directory.  Problems caused by bad user configuration files are solved
   by editing or deleting one or more of the files in .idlerc.

Code Context (toggle)(Editor Window only)
   Open a pane at the top of the edit window which shows the block context
   of the code which has scrolled above the top of the window.  Clicking a
   line in this pane exposes that line at the top of the editor.

Window menu (Shell and Editor)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

Zoom Height
   Toggles the window between normal size and maximum height. The initial size
   defaults to 40 lines by 80 chars unless changed on the General tab of the
   Configure IDLE dialog.

The rest of this menu lists the names of all open windows; select one to bring
it to the foreground (deiconifying it if necessary).

Help menu (Shell and Editor)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^

About IDLE
   Display version, copyright, license, credits, and more.

IDLE Help
   Display a help file for IDLE detailing the menu options, basic editing and
   navigation, and other tips.

Python Docs
   Access local Python documentation, if installed, or start a web browser
   and open docs.python.org showing the latest Python documentation.

Turtle Demo
   Run the turtledemo module with example python code and turtle drawings.

Additional help sources may be added here with the Configure IDLE dialog under
the General tab.

.. index::
   single: Cut
   single: Copy
   single: Paste
   single: Set Breakpoint
   single: Clear Breakpoint
   single: breakpoints

Context Menus
^^^^^^^^^^^^^^^^^^^^^^^^^^

Open a context menu by right-clicking in a window (Control-click on OS X).
Context menus have the standard clipboard functions also on the Edit menu.

Cut
   Copy selection into the system-wide clipboard; then delete the selection.

Copy
   Copy selection into the system-wide clipboard.

Paste
   Insert contents of the system-wide clipboard into the current window.

Editor windows also have breakpoint functions.  Lines with a breakpoint set are
specially marked.  Breakpoints only have an effect when running under the
debugger.  Breakpoints for a file are saved in the user's .idlerc directory.

Set Breakpoint
   Set a breakpoint on the current line.

Clear Breakpoint
   Clear the breakpoint on that line.

Shell and Output windows have the following.

Go to file/line
   Same as in Debug menu.

Editing and navigation
----------------------

In this section, 'C' refers to the :kbd:`Control` key on Windows and Unix and
the :kbd:`Command` key on Mac OSX.

* :kbd:`Backspace` deletes to the left; :kbd:`Del` deletes to the right

* :kbd:`C-Backspace` delete word left; :kbd:`C-Del` delete word to the right

* Arrow keys and :kbd:`Page Up`/:kbd:`Page Down` to move around

* :kbd:`C-LeftArrow` and :kbd:`C-RightArrow` moves by words

* :kbd:`Home`/:kbd:`End` go to begin/end of line

* :kbd:`C-Home`/:kbd:`C-End` go to begin/end of file

* Some useful Emacs bindings are inherited from Tcl/Tk:

* :kbd:`C-a` beginning of line

* :kbd:`C-e` end of line

* :kbd:`C-k` kill line (but doesn't put it in clipboard)

* :kbd:`C-l` center window around the insertion point

* :kbd:`C-b` go backward one character without deleting (usually you can
     also use the cursor key for this)

* :kbd:`C-f` go forward one character without deleting (usually you can
     also use the cursor key for this)

* :kbd:`C-p` go up one line (usually you can also use the cursor key for
     this)

* :kbd:`C-d` delete next character

Standard keybindings (like :kbd:`C-c` to copy and :kbd:`C-v` to paste)
may work.  Keybindings are selected in the Configure IDLE dialog.

Automatic indentation
^^^^^^^^^^^^^^^^^^^^^

After a block-opening statement, the next line is indented by 4 spaces (in the
Python Shell window by one tab).  After certain keywords (break, return etc.)
the next line is dedented.  In leading indentation, :kbd:`Backspace` deletes up
to 4 spaces if they are there. :kbd:`Tab` inserts spaces (in the Python
Shell window one tab), number depends on Indent width. Currently, tabs
are restricted to four spaces due to Tcl/Tk limitations.

See also the indent/dedent region commands in the edit menu.

Completions
^^^^^^^^^^^

Completions are supplied for functions, classes, and attributes of classes,
both built-in and user-defined. Completions are also provided for
filenames.

The AutoCompleteWindow (ACW) will open after a predefined delay (default is
two seconds) after a '.' or (in a string) an os.sep is typed. If after one
of those characters (plus zero or more other characters) a tab is typed
the ACW will open immediately if a possible continuation is found.

If there is only one possible completion for the characters entered, a
:kbd:`Tab` will supply that completion without opening the ACW.

'Show Completions' will force open a completions window, by default the
:kbd:`C-space` will open a completions window. In an empty
string, this will contain the files in the current directory. On a
blank line, it will contain the built-in and user-defined functions and
classes in the current namespaces, plus any modules imported. If some
characters have been entered, the ACW will attempt to be more specific.

If a string of characters is typed, the ACW selection will jump to the
entry most closely matching those characters.  Entering a :kbd:`tab` will
cause the longest non-ambiguous match to be entered in the Editor window or
Shell.  Two :kbd:`tab` in a row will supply the current ACW selection, as
will return or a double click.  Cursor keys, Page Up/Down, mouse selection,
and the scroll wheel all operate on the ACW.

"Hidden" attributes can be accessed by typing the beginning of hidden
name after a '.', e.g. '_'. This allows access to modules with
``__all__`` set, or to class-private attributes.

Completions and the 'Expand Word' facility can save a lot of typing!

Completions are currently limited to those in the namespaces. Names in
an Editor window which are not via ``__main__`` and :data:`sys.modules` will
not be found.  Run the module once with your imports to correct this situation.
Note that IDLE itself places quite a few modules in sys.modules, so
much can be found by default, e.g. the re module.

If you don't like the ACW popping up unbidden, simply make the delay
longer or disable the extension.

Calltips
^^^^^^^^

A calltip is shown when one types :kbd:`(` after the name of an *accessible*
function.  A name expression may include dots and subscripts.  A calltip
remains until it is clicked, the cursor is moved out of the argument area,
or :kbd:`)` is typed.  When the cursor is in the argument part of a definition,
the menu or shortcut display a calltip.

A calltip consists of the function signature and the first line of the
docstring.  For builtins without an accessible signature, the calltip
consists of all lines up the fifth line or the first blank line.  These
details may change.

The set of *accessible* functions depends on what modules have been imported
into the user process, including those imported by Idle itself,
and what definitions have been run, all since the last restart.

For example, restart the Shell and enter ``itertools.count(``.  A calltip
appears because Idle imports itertools into the user process for its own use.
(This could change.)  Enter ``turtle.write(`` and nothing appears.  Idle does
not import turtle.  The menu or shortcut do nothing either.  Enter
``import turtle`` and then ``turtle.write(`` will work.

In an editor, import statements have no effect until one runs the file.  One
might want to run a file after writing the import statements at the top,
or immediately run an existing file before editing.

Python Shell window
^^^^^^^^^^^^^^^^^^^

* :kbd:`C-c` interrupts executing command

* :kbd:`C-d` sends end-of-file; closes window if typed at a ``>>>`` prompt

* :kbd:`Alt-/` (Expand word) is also useful to reduce typing

Command history

* :kbd:`Alt-p` retrieves previous command matching what you have typed. On
    OS X use :kbd:`C-p`.

* :kbd:`Alt-n` retrieves next. On OS X use :kbd:`C-n`.

* :kbd:`Return` while on any previous command retrieves that command

Text colors
^^^^^^^^^^^

Idle defaults to black on white text, but colors text with special meanings.
For the shell, these are shell output, shell error, user output, and
user error.  For Python code, at the shell prompt or in an editor, these are
keywords, builtin class and function names, names following ``class`` and
``def``, strings, and comments. For any text window, these are the cursor (when
present), found text (when possible), and selected text.

Text coloring is done in the background, so uncolorized text is occasionally
visible.  To change the color scheme, use the Configure IDLE dialog
Highlighting tab.  The marking of debugger breakpoint lines in the editor and
text in popups and dialogs is not user-configurable.

Startup and code execution
--------------------------

Upon startup with the ``-s`` option, IDLE will execute the file referenced by
the environment variables :envvar:`IDLESTARTUP` or :envvar:`PYTHONSTARTUP`.
IDLE first checks for ``IDLESTARTUP``; if ``IDLESTARTUP`` is present the file
referenced is run.  If ``IDLESTARTUP`` is not present, IDLE checks for
``PYTHONSTARTUP``.  Files referenced by these environment variables are
convenient places to store functions that are used frequently from the IDLE
shell, or for executing import statements to import common modules.

In addition, ``Tk`` also loads a startup file if it is present.  Note that the
Tk file is loaded unconditionally.  This additional file is ``.Idle.py`` and is
looked for in the user's home directory.  Statements in this file will be
executed in the Tk namespace, so this file is not useful for importing
functions to be used from IDLE's Python shell.

Command line usage
^^^^^^^^^^^^^^^^^^

.. code-block:: none

idle.py [-c command] [-d] [-e] [-h] [-i] [-r file] [-s] [-t title] [-] [arg] ...

-c command  run command in the shell window
   -d          enable debugger and open shell window
   -e          open editor window
   -h          print help message with legal combinations and exit
   -i          open shell window
   -r file     run file in shell window
   -s          run $IDLESTARTUP or $PYTHONSTARTUP first, in shell window
   -t title    set title of shell window
   -           run stdin in shell (- must be last option before args)

If there are arguments:

* If ``-``, ``-c``, or ``r`` is used, all arguments are placed in
  ``sys.argv[1:...]`` and ``sys.argv[0]`` is set to ``''``, ``'-c'``,
  or ``'-r'``.  No editor window is opened, even if that is the default
  set in the Options dialog.

* Otherwise, arguments are files opened for editing and
  ``sys.argv`` reflects the arguments passed to IDLE itself.

Startup failure
^^^^^^^^^^^^^^^

IDLE uses a socket to communicate between the IDLE GUI process and the user
code execution process.  A connection must be established whenever the Shell
starts or restarts.  (The latter is indicated by a divider line that says
'RESTART'). If the user process fails to connect to the GUI process, it
displays a ``Tk`` error box with a 'cannot connect' message that directs the
user here.  It then exits.

A common cause of failure is a user-written file with the same name as a
standard library module, such as *random.py* and *tkinter.py*. When such a
file is located in the same directory as a file that is about to be run,
IDLE cannot import the stdlib file.  The current fix is to rename the
user file.

Though less common than in the past, an antivirus or firewall program may
stop the connection.  If the program cannot be taught to allow the
connection, then it must be turned off for IDLE to work.  It is safe to
allow this internal connection because no data is visible on external
ports.  A similar problem is a network mis-configuration that blocks
connections.

Python installation issues occasionally stop IDLE: multiple versions can
clash, or a single installation might need admin access.  If one undo the
clash, or cannot or does not want to run as admin, it might be easiest to
completely remove Python and start over.

A zombie pythonw.exe process could be a problem.  On Windows, use Task
Manager to detect and stop one.  Sometimes a restart initiated by a program
crash or Keyboard Interrupt (control-C) may fail to connect.  Dismissing
the error box or Restart Shell on the Shell menu may fix a temporary problem.

When IDLE first starts, it attempts to read user configuration files in
~/.idlerc/ (~ is one's home directory).  If there is a problem, an error
message should be displayed.  Leaving aside random disk glitches, this can
be prevented by never editing the files by hand, using the configuration
dialog, under Options, instead Options.  Once it happens, the solution may
be to delete one or more of the configuration files.

If IDLE quits with no message, and it was not started from a console, try
starting from a console (``python -m idlelib)`` and see if a message appears.

IDLE-console differences
^^^^^^^^^^^^^^^^^^^^^^^^

With rare exceptions, the result of executing Python code with IDLE is
intended to be the same as executing the same code in a console window.
However, the different interface and operation occasionally affect
visible results.  For instance, ``sys.modules`` starts with more entries.

IDLE also replaces ``sys.stdin``, ``sys.stdout``, and ``sys.stderr`` with
objects that get input from and send output to the Shell window.
When Shell has the focus, it controls the keyboard and screen.  This is
normally transparent, but functions that directly access the keyboard
and screen will not work.  If ``sys`` is reset with ``importlib.reload(sys)``,
IDLE's changes are lost and things like ``input``, ``raw_input``, and
``print`` will not work correctly.

With IDLE's Shell, one enters, edits, and recalls complete statements.
Some consoles only work with a single physical line at a time.  IDLE uses
``exec`` to run each statement.  As a result, ``'__builtins__'`` is always
defined for each statement.

Developing tkinter applications
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

IDLE is intentionally different from standard Python in order to
facilitate development of tkinter programs.  Enter ``import tkinter as tk;
root = tk.Tk()`` in standard Python and nothing appears.  Enter the same
in IDLE and a tk window appears.  In standard Python, one must also enter
``root.update()`` to see the window.  IDLE does the equivalent in the
background, about 20 times a second, which is about every 50 milleseconds.
Next enter ``b = tk.Button(root, text='button'); b.pack()``.  Again,
nothing visibly changes in standard Python until one enters ``root.update()``.

Most tkinter programs run ``root.mainloop()``, which usually does not
return until the tk app is destroyed.  If the program is run with
``python -i`` or from an IDLE editor, a ``>>>`` shell prompt does not
appear until ``mainloop()`` returns, at which time there is nothing left
to interact with.

When running a tkinter program from an IDLE editor, one can comment out
the mainloop call.  One then gets a shell prompt immediately and can
interact with the live application.  One just has to remember to
re-enable the mainloop call when running in standard Python.

Running without a subprocess
^^^^^^^^^^^^^^^^^^^^^^^^^^^^

By default, IDLE executes user code in a separate subprocess via a socket,
which uses the internal loopback interface.  This connection is not
externally visible and no data is sent to or received from the Internet.
If firewall software complains anyway, you can ignore it.

If the attempt to make the socket connection fails, Idle will notify you.
Such failures are sometimes transient, but if persistent, the problem
may be either a firewall blocking the connection or misconfiguration of
a particular system.  Until the problem is fixed, one can run Idle with
the -n command line switch.

If IDLE is started with the -n command line switch it will run in a
single process and will not create the subprocess which runs the RPC
Python execution server.  This can be useful if Python cannot create
the subprocess or the RPC socket interface on your platform.  However,
in this mode user code is not isolated from IDLE itself.  Also, the
environment is not restarted when Run/Run Module (F5) is selected.  If
your code has been modified, you must reload() the affected modules and
re-import any specific items (e.g. from foo import baz) if the changes
are to take effect.  For these reasons, it is preferable to run IDLE
with the default subprocess if at all possible.

.. deprecated:: 3.4

Help and preferences
--------------------

Additional help sources
^^^^^^^^^^^^^^^^^^^^^^^

IDLE includes a help menu entry called "Python Docs" that will open the
extensive sources of help, including tutorials, available at docs.python.org.
Selected URLs can be added or removed from the help menu at any time using the
Configure IDLE dialog. See the IDLE help option in the help menu of IDLE for
more information.

Setting preferences
^^^^^^^^^^^^^^^^^^^

The font preferences, highlighting, keys, and general preferences can be
changed via Configure IDLE on the Option menu.  Keys can be user defined;
IDLE ships with four built-in key sets. In addition, a user can create a
custom key set in the Configure IDLE dialog under the keys tab.

Extensions
^^^^^^^^^^

IDLE contains an extension facility.  Preferences for extensions can be
changed with the Extensions tab of the preferences dialog. See the
beginning of config-extensions.def in the idlelib directory for further
information.  The only current default extension is zzdummy, an example
also used for testing.

.. _idle: IDLE ==== .. moduleauthor:: Guido van Rossum **Source code:** :source:`Lib/idlelib/` .. index:: single: IDLE single: Python Editor single: Integrated Development Environment -------------- IDLE is Python's Integrated Development and Learning Environment. IDLE has the following features: * coded in 100% pure Python, using the :mod:`tkinter` GUI toolkit * cross-platform: works mostly the same on Windows, Unix, and Mac OS X * Python shell window (interactive interpreter) with colorizing of code input, output, and error messages * multi-window text editor with multiple undo, Python colorizing, smart indent, call tips, auto completion, and other features * search within any window, replace within editor windows, and search through multiple files (grep) * debugger with persistent breakpoints, stepping, and viewing of global and local namespaces * configuration, browsers, and other dialogs Menus ----- IDLE has two main window types, the Shell window and the Editor window. It is possible to have multiple editor windows simultaneously. Output windows, such as used for Edit / Find in Files, are a subtype of edit window. They currently have the same top menu as Editor windows but a different default title and context menu. IDLE's menus dynamically change based on which window is currently selected. Each menu documented below indicates which window type it is associated with. File menu (Shell and Editor) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ New File Create a new file editing window. Open... Open an existing file with an Open dialog. Recent Files Open a list of recent files. Click one to open it. Open Module... Open an existing module (searches sys.path). .. index:: single: Class browser single: Path browser Class Browser Show functions, classes, and methods in the current Editor file in a tree structure. In the shell, open a module first. Path Browser Show sys.path directories, modules, functions, classes and methods in a tree structure. Save Save the current window to the associated file, if there is one. Windows that have been changed since being opened or last saved have a \* before and after the window title. If there is no associated file, do Save As instead. Save As... Save the current window with a Save As dialog. The file saved becomes the new associated file for the window. Save Copy As... Save the current window to different file without changing the associated file. Print Window Print the current window to the default printer. Close Close the current window (ask to save if unsaved). Exit Close all windows and quit IDLE (ask to save unsaved windows). Edit menu (Shell and Editor) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Undo Undo the last change to the current window. A maximum of 1000 changes may be undone. Redo Redo the last undone change to the current window. Cut Copy selection into the system-wide clipboard; then delete the selection. Copy Copy selection into the system-wide clipboard. Paste Insert contents of the system-wide clipboard into the current window. The clipboard functions are also available in context menus. Select All Select the entire contents of the current window. Find... Open a search dialog with many options Find Again Repeat the last search, if there is one. Find Selection Search for the currently selected string, if there is one. Find in Files... Open a file search dialog. Put results in a new output window. Replace... Open a search-and-replace dialog. Go to Line Move cursor to the line number requested and make that line visible. Show Completions Open a scrollable list allowing selection of keywords and attributes. See Completions in the Tips sections below. Expand Word Expand a prefix you have typed to match a full word in the same window; repeat to get a different expansion. Show call tip After an unclosed parenthesis for a function, open a small window with function parameter hints. Show surrounding parens Highlight the surrounding parenthesis. Format menu (Editor window only) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Indent Region Shift selected lines right by the indent width (default 4 spaces). Dedent Region Shift selected lines left by the indent width (default 4 spaces). Comment Out Region Insert ## in front of selected lines. Uncomment Region Remove leading # or ## from selected lines. Tabify Region Turn *leading* stretches of spaces into tabs. (Note: We recommend using 4 space blocks to indent Python code.) Untabify Region Turn *all* tabs into the correct number of spaces. Toggle Tabs Open a dialog to switch between indenting with spaces and tabs. New Indent Width Open a dialog to change indent width. The accepted default by the Python community is 4 spaces. Format Paragraph Reformat the current blank-line-delimited paragraph in comment block or multiline string or selected line in a string. All lines in the paragraph will be formatted to less than N columns, where N defaults to 72. Strip trailing whitespace Remove trailing space and other whitespace characters after the last non-whitespace character of a line by applying str.rstrip to each line, including lines within multiline strings. .. index:: single: Run script Run menu (Editor window only) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Python Shell Open or wake up the Python Shell window. Check Module Check the syntax of the module currently open in the Editor window. If the module has not been saved IDLE will either prompt the user to save or autosave, as selected in the General tab of the Idle Settings dialog. If there is a syntax error, the approximate location is indicated in the Editor window. Run Module Do Check Module (above). If no error, restart the shell to clean the environment, then execute the module. Output is displayed in the Shell window. Note that output requires use of ``print`` or ``write``. When execution is complete, the Shell retains focus and displays a prompt. At this point, one may interactively explore the result of execution. This is similar to executing a file with ``python -i file`` at a command line. Shell menu (Shell window only) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ View Last Restart Scroll the shell window to the last Shell restart. Restart Shell Restart the shell to clean the environment. Interrupt Execution Stop a running program. Debug menu (Shell window only) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Go to File/Line Look on the current line. with the cursor, and the line above for a filename and line number. If found, open the file if not already open, and show the line. Use this to view source lines referenced in an exception traceback and lines found by Find in Files. Also available in the context menu of the Shell window and Output windows. .. index:: single: debugger single: stack viewer Debugger (toggle) When activated, code entered in the Shell or run from an Editor will run under the debugger. In the Editor, breakpoints can be set with the context menu. This feature is still incomplete and somewhat experimental. Stack Viewer Show the stack traceback of the last exception in a tree widget, with access to locals and globals. Auto-open Stack Viewer Toggle automatically opening the stack viewer on an unhandled exception. Options menu (Shell and Editor) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Configure IDLE Open a configuration dialog and change preferences for the following: fonts, indentation, keybindings, text color themes, startup windows and size, additional help sources, and extensions (see below). On OS X, open the configuration dialog by selecting Preferences in the application menu. To use a new built-in color theme (IDLE Dark) with older IDLEs, save it as a new custom theme. Non-default user settings are saved in a .idlerc directory in the user's home directory. Problems caused by bad user configuration files are solved by editing or deleting one or more of the files in .idlerc. Code Context (toggle)(Editor Window only) Open a pane at the top of the edit window which shows the block context of the code which has scrolled above the top of the window. Clicking a line in this pane exposes that line at the top of the editor. Window menu (Shell and Editor) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Zoom Height Toggles the window between normal size and maximum height. The initial size defaults to 40 lines by 80 chars unless changed on the General tab of the Configure IDLE dialog. The rest of this menu lists the names of all open windows; select one to bring it to the foreground (deiconifying it if necessary). Help menu (Shell and Editor) ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ About IDLE Display version, copyright, license, credits, and more. IDLE Help Display a help file for IDLE detailing the menu options, basic editing and navigation, and other tips. Python Docs Access local Python documentation, if installed, or start a web browser and open docs.python.org showing the latest Python documentation. Turtle Demo Run the turtledemo module with example python code and turtle drawings. Additional help sources may be added here with the Configure IDLE dialog under the General tab. .. index:: single: Cut single: Copy single: Paste single: Set Breakpoint single: Clear Breakpoint single: breakpoints Context Menus ^^^^^^^^^^^^^^^^^^^^^^^^^^ Open a context menu by right-clicking in a window (Control-click on OS X). Context menus have the standard clipboard functions also on the Edit menu. Cut Copy selection into the system-wide clipboard; then delete the selection. Copy Copy selection into the system-wide clipboard. Paste Insert contents of the system-wide clipboard into the current window. Editor windows also have breakpoint functions. Lines with a breakpoint set are specially marked. Breakpoints only have an effect when running under the debugger. Breakpoints for a file are saved in the user's .idlerc directory. Set Breakpoint Set a breakpoint on the current line. Clear Breakpoint Clear the breakpoint on that line. Shell and Output windows have the following. Go to file/line Same as in Debug menu. Editing and navigation ---------------------- In this section, 'C' refers to the :kbd:`Control` key on Windows and Unix and the :kbd:`Command` key on Mac OSX. * :kbd:`Backspace` deletes to the left; :kbd:`Del` deletes to the right * :kbd:`C-Backspace` delete word left; :kbd:`C-Del` delete word to the right * Arrow keys and :kbd:`Page Up`/:kbd:`Page Down` to move around * :kbd:`C-LeftArrow` and :kbd:`C-RightArrow` moves by words * :kbd:`Home`/:kbd:`End` go to begin/end of line * :kbd:`C-Home`/:kbd:`C-End` go to begin/end of file * Some useful Emacs bindings are inherited from Tcl/Tk: * :kbd:`C-a` beginning of line * :kbd:`C-e` end of line * :kbd:`C-k` kill line (but doesn't put it in clipboard) * :kbd:`C-l` center window around the insertion point * :kbd:`C-b` go backward one character without deleting (usually you can also use the cursor key for this) * :kbd:`C-f` go forward one character without deleting (usually you can also use the cursor key for this) * :kbd:`C-p` go up one line (usually you can also use the cursor key for this) * :kbd:`C-d` delete next character Standard keybindings (like :kbd:`C-c` to copy and :kbd:`C-v` to paste) may work. Keybindings are selected in the Configure IDLE dialog. Automatic indentation ^^^^^^^^^^^^^^^^^^^^^ After a block-opening statement, the next line is indented by 4 spaces (in the Python Shell window by one tab). After certain keywords (break, return etc.) the next line is dedented. In leading indentation, :kbd:`Backspace` deletes up to 4 spaces if they are there. :kbd:`Tab` inserts spaces (in the Python Shell window one tab), number depends on Indent width. Currently, tabs are restricted to four spaces due to Tcl/Tk limitations. See also the indent/dedent region commands in the edit menu. Completions ^^^^^^^^^^^ Completions are supplied for functions, classes, and attributes of classes, both built-in and user-defined. Completions are also provided for filenames. The AutoCompleteWindow (ACW) will open after a predefined delay (default is two seconds) after a '.' or (in a string) an os.sep is typed. If after one of those characters (plus zero or more other characters) a tab is typed the ACW will open immediately if a possible continuation is found. If there is only one possible completion for the characters entered, a :kbd:`Tab` will supply that completion without opening the ACW. 'Show Completions' will force open a completions window, by default the :kbd:`C-space` will open a completions window. In an empty string, this will contain the files in the current directory. On a blank line, it will contain the built-in and user-defined functions and classes in the current namespaces, plus any modules imported. If some characters have been entered, the ACW will attempt to be more specific. If a string of characters is typed, the ACW selection will jump to the entry most closely matching those characters. Entering a :kbd:`tab` will cause the longest non-ambiguous match to be entered in the Editor window or Shell. Two :kbd:`tab` in a row will supply the current ACW selection, as will return or a double click. Cursor keys, Page Up/Down, mouse selection, and the scroll wheel all operate on the ACW. "Hidden" attributes can be accessed by typing the beginning of hidden name after a '.', e.g. '_'. This allows access to modules with ``__all__`` set, or to class-private attributes. Completions and the 'Expand Word' facility can save a lot of typing! Completions are currently limited to those in the namespaces. Names in an Editor window which are not via ``__main__`` and :data:`sys.modules` will not be found. Run the module once with your imports to correct this situation. Note that IDLE itself places quite a few modules in sys.modules, so much can be found by default, e.g. the re module. If you don't like the ACW popping up unbidden, simply make the delay longer or disable the extension. Calltips ^^^^^^^^ A calltip is shown when one types :kbd:`(` after the name of an *accessible* function. A name expression may include dots and subscripts. A calltip remains until it is clicked, the cursor is moved out of the argument area, or :kbd:`)` is typed. When the cursor is in the argument part of a definition, the menu or shortcut display a calltip. A calltip consists of the function signature and the first line of the docstring. For builtins without an accessible signature, the calltip consists of all lines up the fifth line or the first blank line. These details may change. The set of *accessible* functions depends on what modules have been imported into the user process, including those imported by Idle itself, and what definitions have been run, all since the last restart. For example, restart the Shell and enter ``itertools.count(``. A calltip appears because Idle imports itertools into the user process for its own use. (This could change.) Enter ``turtle.write(`` and nothing appears. Idle does not import turtle. The menu or shortcut do nothing either. Enter ``import turtle`` and then ``turtle.write(`` will work. In an editor, import statements have no effect until one runs the file. One might want to run a file after writing the import statements at the top, or immediately run an existing file before editing. Python Shell window ^^^^^^^^^^^^^^^^^^^ * :kbd:`C-c` interrupts executing command * :kbd:`C-d` sends end-of-file; closes window if typed at a ``>>>`` prompt * :kbd:`Alt-/` (Expand word) is also useful to reduce typing Command history * :kbd:`Alt-p` retrieves previous command matching what you have typed. On OS X use :kbd:`C-p`. * :kbd:`Alt-n` retrieves next. On OS X use :kbd:`C-n`. * :kbd:`Return` while on any previous command retrieves that command Text colors ^^^^^^^^^^^ Idle defaults to black on white text, but colors text with special meanings. For the shell, these are shell output, shell error, user output, and user error. For Python code, at the shell prompt or in an editor, these are keywords, builtin class and function names, names following ``class`` and ``def``, strings, and comments. For any text window, these are the cursor (when present), found text (when possible), and selected text. Text coloring is done in the background, so uncolorized text is occasionally visible. To change the color scheme, use the Configure IDLE dialog Highlighting tab. The marking of debugger breakpoint lines in the editor and text in popups and dialogs is not user-configurable. Startup and code execution -------------------------- Upon startup with the ``-s`` option, IDLE will execute the file referenced by the environment variables :envvar:`IDLESTARTUP` or :envvar:`PYTHONSTARTUP`. IDLE first checks for ``IDLESTARTUP``; if ``IDLESTARTUP`` is present the file referenced is run. If ``IDLESTARTUP`` is not present, IDLE checks for ``PYTHONSTARTUP``. Files referenced by these environment variables are convenient places to store functions that are used frequently from the IDLE shell, or for executing import statements to import common modules. In addition, ``Tk`` also loads a startup file if it is present. Note that the Tk file is loaded unconditionally. This additional file is ``.Idle.py`` and is looked for in the user's home directory. Statements in this file will be executed in the Tk namespace, so this file is not useful for importing functions to be used from IDLE's Python shell. Command line usage ^^^^^^^^^^^^^^^^^^ .. code-block:: none idle.py [-c command] [-d] [-e] [-h] [-i] [-r file] [-s] [-t title] [-] [arg] ... -c command run command in the shell window -d enable debugger and open shell window -e open editor window -h print help message with legal combinations and exit -i open shell window -r file run file in shell window -s run $IDLESTARTUP or $PYTHONSTARTUP first, in shell window -t title set title of shell window - run stdin in shell (- must be last option before args) If there are arguments: * If ``-``, ``-c``, or ``r`` is used, all arguments are placed in ``sys.argv[1:...]`` and ``sys.argv[0]`` is set to ``''``, ``'-c'``, or ``'-r'``. No editor window is opened, even if that is the default set in the Options dialog. * Otherwise, arguments are files opened for editing and ``sys.argv`` reflects the arguments passed to IDLE itself. Startup failure ^^^^^^^^^^^^^^^ IDLE uses a socket to communicate between the IDLE GUI process and the user code execution process. A connection must be established whenever the Shell starts or restarts. (The latter is indicated by a divider line that says 'RESTART'). If the user process fails to connect to the GUI process, it displays a ``Tk`` error box with a 'cannot connect' message that directs the user here. It then exits. A common cause of failure is a user-written file with the same name as a standard library module, such as *random.py* and *tkinter.py*. When such a file is located in the same directory as a file that is about to be run, IDLE cannot import the stdlib file. The current fix is to rename the user file. Though less common than in the past, an antivirus or firewall program may stop the connection. If the program cannot be taught to allow the connection, then it must be turned off for IDLE to work. It is safe to allow this internal connection because no data is visible on external ports. A similar problem is a network mis-configuration that blocks connections. Python installation issues occasionally stop IDLE: multiple versions can clash, or a single installation might need admin access. If one undo the clash, or cannot or does not want to run as admin, it might be easiest to completely remove Python and start over. A zombie pythonw.exe process could be a problem. On Windows, use Task Manager to detect and stop one. Sometimes a restart initiated by a program crash or Keyboard Interrupt (control-C) may fail to connect. Dismissing the error box or Restart Shell on the Shell menu may fix a temporary problem. When IDLE first starts, it attempts to read user configuration files in ~/.idlerc/ (~ is one's home directory). If there is a problem, an error message should be displayed. Leaving aside random disk glitches, this can be prevented by never editing the files by hand, using the configuration dialog, under Options, instead Options. Once it happens, the solution may be to delete one or more of the configuration files. If IDLE quits with no message, and it was not started from a console, try starting from a console (``python -m idlelib)`` and see if a message appears. IDLE-console differences ^^^^^^^^^^^^^^^^^^^^^^^^ With rare exceptions, the result of executing Python code with IDLE is intended to be the same as executing the same code in a console window. However, the different interface and operation occasionally affect visible results. For instance, ``sys.modules`` starts with more entries. IDLE also replaces ``sys.stdin``, ``sys.stdout``, and ``sys.stderr`` with objects that get input from and send output to the Shell window. When Shell has the focus, it controls the keyboard and screen. This is normally transparent, but functions that directly access the keyboard and screen will not work. If ``sys`` is reset with ``importlib.reload(sys)``, IDLE's changes are lost and things like ``input``, ``raw_input``, and ``print`` will not work correctly. With IDLE's Shell, one enters, edits, and recalls complete statements. Some consoles only work with a single physical line at a time. IDLE uses ``exec`` to run each statement. As a result, ``'__builtins__'`` is always defined for each statement. Developing tkinter applications ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ IDLE is intentionally different from standard Python in order to facilitate development of tkinter programs. Enter ``import tkinter as tk; root = tk.Tk()`` in standard Python and nothing appears. Enter the same in IDLE and a tk window appears. In standard Python, one must also enter ``root.update()`` to see the window. IDLE does the equivalent in the background, about 20 times a second, which is about every 50 milleseconds. Next enter ``b = tk.Button(root, text='button'); b.pack()``. Again, nothing visibly changes in standard Python until one enters ``root.update()``. Most tkinter programs run ``root.mainloop()``, which usually does not return until the tk app is destroyed. If the program is run with ``python -i`` or from an IDLE editor, a ``>>>`` shell prompt does not appear until ``mainloop()`` returns, at which time there is nothing left to interact with. When running a tkinter program from an IDLE editor, one can comment out the mainloop call. One then gets a shell prompt immediately and can interact with the live application. One just has to remember to re-enable the mainloop call when running in standard Python. Running without a subprocess ^^^^^^^^^^^^^^^^^^^^^^^^^^^^ By default, IDLE executes user code in a separate subprocess via a socket, which uses the internal loopback interface. This connection is not externally visible and no data is sent to or received from the Internet. If firewall software complains anyway, you can ignore it. If the attempt to make the socket connection fails, Idle will notify you. Such failures are sometimes transient, but if persistent, the problem may be either a firewall blocking the connection or misconfiguration of a particular system. Until the problem is fixed, one can run Idle with the -n command line switch. If IDLE is started with the -n command line switch it will run in a single process and will not create the subprocess which runs the RPC Python execution server. This can be useful if Python cannot create the subprocess or the RPC socket interface on your platform. However, in this mode user code is not isolated from IDLE itself. Also, the environment is not restarted when Run/Run Module (F5) is selected. If your code has been modified, you must reload() the affected modules and re-import any specific items (e.g. from foo import baz) if the changes are to take effect. For these reasons, it is preferable to run IDLE with the default subprocess if at all possible. .. deprecated:: 3.4 Help and preferences -------------------- Additional help sources ^^^^^^^^^^^^^^^^^^^^^^^ IDLE includes a help menu entry called "Python Docs" that will open the extensive sources of help, including tutorials, available at docs.python.org. Selected URLs can be added or removed from the help menu at any time using the Configure IDLE dialog. See the IDLE help option in the help menu of IDLE for more information. Setting preferences ^^^^^^^^^^^^^^^^^^^ The font preferences, highlighting, keys, and general preferences can be changed via Configure IDLE on the Option menu. Keys can be user defined; IDLE ships with four built-in key sets. In addition, a user can create a custom key set in the Configure IDLE dialog under the keys tab. Extensions ^^^^^^^^^^ IDLE contains an extension facility. Preferences for extensions can be changed with the Extensions tab of the preferences dialog. See the beginning of config-extensions.def in the idlelib directory for further information. The only current default extension is zzdummy, an example also used for testing.