Name	Size	Mode	Actions
bus.h	5867	0644	editdlrm
clcd-regs.h	2420	0644	editdlrm
clcd.h	8105	0644	editdlrm
kmi.h	2943	0644	editdlrm
mmci.h	1281	0644	editdlrm
pl022.h	8913	0644	editdlrm
pl08x.h	4594	0644	editdlrm
pl080.h	7726	0644	editdlrm
pl093.h	2224	0644	editdlrm
serial.h	9921	0644	editdlrm
sp810.h	1526	0644	editdlrm

/* SPDX-License-Identifier: GPL-2.0 */ /* * include/linux/amba/mmci.h */ #ifndef AMBA_MMCI_H #define AMBA_MMCI_H #include /** * struct mmci_platform_data - platform configuration for the MMCI * (also known as PL180) block. * @ocr_mask: available voltages on the 4 pins from the block, this * is ignored if a regulator is used, see the MMC_VDD_* masks in * mmc/host.h * @ios_handler: a callback function to act on specfic ios changes, * used for example to control a levelshifter * mask into a value to be binary (or set some other custom bits * in MMCIPWR) or:ed and written into the MMCIPWR register of the * block. May also control external power based on the power_mode. * @status: if no GPIO read function was given to the block in * gpio_wp (below) this function will be called to determine * whether a card is present in the MMC slot or not * @gpio_wp: read this GPIO pin to see if the card is write protected * @gpio_cd: read this GPIO pin to detect card insertion * @cd_invert: true if the gpio_cd pin value is active low */ struct mmci_platform_data { unsigned int ocr_mask; int (*ios_handler)(struct device *, struct mmc_ios *); unsigned int (*status)(struct device *); int gpio_wp; int gpio_cd; bool cd_invert; }; #endif