/usr/src/kernels/4.18.0-553.157.1.el8_10.x86_64/include/linux/mfd
Edit: /usr/src/kernels/4.18.0-553.157.1.el8_10.x86_64/include/linux/mfd/stm32-timers.h (5784B)
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) STMicroelectronics 2016
* Author: Benjamin Gaignard
*/
#ifndef _LINUX_STM32_GPTIMER_H_
#define _LINUX_STM32_GPTIMER_H_
#include
#include
#include
#include
#define TIM_CR1 0x00 /* Control Register 1 */
#define TIM_CR2 0x04 /* Control Register 2 */
#define TIM_SMCR 0x08 /* Slave mode control reg */
#define TIM_DIER 0x0C /* DMA/interrupt register */
#define TIM_SR 0x10 /* Status register */
#define TIM_EGR 0x14 /* Event Generation Reg */
#define TIM_CCMR1 0x18 /* Capt/Comp 1 Mode Reg */
#define TIM_CCMR2 0x1C /* Capt/Comp 2 Mode Reg */
#define TIM_CCER 0x20 /* Capt/Comp Enable Reg */
#define TIM_CNT 0x24 /* Counter */
#define TIM_PSC 0x28 /* Prescaler */
#define TIM_ARR 0x2c /* Auto-Reload Register */
#define TIM_CCR1 0x34 /* Capt/Comp Register 1 */
#define TIM_CCR2 0x38 /* Capt/Comp Register 2 */
#define TIM_CCR3 0x3C /* Capt/Comp Register 3 */
#define TIM_CCR4 0x40 /* Capt/Comp Register 4 */
#define TIM_BDTR 0x44 /* Break and Dead-Time Reg */
#define TIM_DCR 0x48 /* DMA control register */
#define TIM_DMAR 0x4C /* DMA register for transfer */
#define TIM_CR1_CEN BIT(0) /* Counter Enable */
#define TIM_CR1_DIR BIT(4) /* Counter Direction */
#define TIM_CR1_ARPE BIT(7) /* Auto-reload Preload Ena */
#define TIM_CR2_MMS (BIT(4) | BIT(5) | BIT(6)) /* Master mode selection */
#define TIM_CR2_MMS2 GENMASK(23, 20) /* Master mode selection 2 */
#define TIM_SMCR_SMS (BIT(0) | BIT(1) | BIT(2)) /* Slave mode selection */
#define TIM_SMCR_TS (BIT(4) | BIT(5) | BIT(6)) /* Trigger selection */
#define TIM_DIER_UIE BIT(0) /* Update interrupt */
#define TIM_DIER_UDE BIT(8) /* Update DMA request Enable */
#define TIM_DIER_CC1DE BIT(9) /* CC1 DMA request Enable */
#define TIM_DIER_CC2DE BIT(10) /* CC2 DMA request Enable */
#define TIM_DIER_CC3DE BIT(11) /* CC3 DMA request Enable */
#define TIM_DIER_CC4DE BIT(12) /* CC4 DMA request Enable */
#define TIM_DIER_COMDE BIT(13) /* COM DMA request Enable */
#define TIM_DIER_TDE BIT(14) /* Trigger DMA request Enable */
#define TIM_SR_UIF BIT(0) /* Update interrupt flag */
#define TIM_EGR_UG BIT(0) /* Update Generation */
#define TIM_CCMR_PE BIT(3) /* Channel Preload Enable */
#define TIM_CCMR_M1 (BIT(6) | BIT(5)) /* Channel PWM Mode 1 */
#define TIM_CCMR_CC1S (BIT(0) | BIT(1)) /* Capture/compare 1 sel */
#define TIM_CCMR_IC1PSC GENMASK(3, 2) /* Input capture 1 prescaler */
#define TIM_CCMR_CC2S (BIT(8) | BIT(9)) /* Capture/compare 2 sel */
#define TIM_CCMR_IC2PSC GENMASK(11, 10) /* Input capture 2 prescaler */
#define TIM_CCMR_CC1S_TI1 BIT(0) /* IC1/IC3 selects TI1/TI3 */
#define TIM_CCMR_CC1S_TI2 BIT(1) /* IC1/IC3 selects TI2/TI4 */
#define TIM_CCMR_CC2S_TI2 BIT(8) /* IC2/IC4 selects TI2/TI4 */
#define TIM_CCMR_CC2S_TI1 BIT(9) /* IC2/IC4 selects TI1/TI3 */
#define TIM_CCER_CC1E BIT(0) /* Capt/Comp 1 out Ena */
#define TIM_CCER_CC1P BIT(1) /* Capt/Comp 1 Polarity */
#define TIM_CCER_CC1NE BIT(2) /* Capt/Comp 1N out Ena */
#define TIM_CCER_CC1NP BIT(3) /* Capt/Comp 1N Polarity */
#define TIM_CCER_CC2E BIT(4) /* Capt/Comp 2 out Ena */
#define TIM_CCER_CC2P BIT(5) /* Capt/Comp 2 Polarity */
#define TIM_CCER_CC3E BIT(8) /* Capt/Comp 3 out Ena */
#define TIM_CCER_CC3P BIT(9) /* Capt/Comp 3 Polarity */
#define TIM_CCER_CC4E BIT(12) /* Capt/Comp 4 out Ena */
#define TIM_CCER_CC4P BIT(13) /* Capt/Comp 4 Polarity */
#define TIM_CCER_CCXE (BIT(0) | BIT(4) | BIT(8) | BIT(12))
#define TIM_BDTR_BKE BIT(12) /* Break input enable */
#define TIM_BDTR_BKP BIT(13) /* Break input polarity */
#define TIM_BDTR_AOE BIT(14) /* Automatic Output Enable */
#define TIM_BDTR_MOE BIT(15) /* Main Output Enable */
#define TIM_BDTR_BKF (BIT(16) | BIT(17) | BIT(18) | BIT(19))
#define TIM_BDTR_BK2F (BIT(20) | BIT(21) | BIT(22) | BIT(23))
#define TIM_BDTR_BK2E BIT(24) /* Break 2 input enable */
#define TIM_BDTR_BK2P BIT(25) /* Break 2 input polarity */
#define TIM_DCR_DBA GENMASK(4, 0) /* DMA base addr */
#define TIM_DCR_DBL GENMASK(12, 8) /* DMA burst len */
#define MAX_TIM_PSC 0xFFFF
#define MAX_TIM_ICPSC 0x3
#define TIM_CR2_MMS_SHIFT 4
#define TIM_CR2_MMS2_SHIFT 20
#define TIM_SMCR_TS_SHIFT 4
#define TIM_BDTR_BKF_MASK 0xF
#define TIM_BDTR_BKF_SHIFT 16
#define TIM_BDTR_BK2F_SHIFT 20
enum stm32_timers_dmas {
STM32_TIMERS_DMA_CH1,
STM32_TIMERS_DMA_CH2,
STM32_TIMERS_DMA_CH3,
STM32_TIMERS_DMA_CH4,
STM32_TIMERS_DMA_UP,
STM32_TIMERS_DMA_TRIG,
STM32_TIMERS_DMA_COM,
STM32_TIMERS_MAX_DMAS,
};
/**
* struct stm32_timers_dma - STM32 timer DMA handling.
* @completion: end of DMA transfer completion
* @phys_base: control registers physical base address
* @lock: protect DMA access
* @chan: DMA channel in use
* @chans: DMA channels available for this timer instance
*/
struct stm32_timers_dma {
struct completion completion;
phys_addr_t phys_base;
struct mutex lock;
struct dma_chan *chan;
struct dma_chan *chans[STM32_TIMERS_MAX_DMAS];
};
struct stm32_timers {
struct clk *clk;
struct regmap *regmap;
u32 max_arr;
struct stm32_timers_dma dma; /* Only to be used by the parent */
};
#if IS_REACHABLE(CONFIG_MFD_STM32_TIMERS)
int stm32_timers_dma_burst_read(struct device *dev, u32 *buf,
enum stm32_timers_dmas id, u32 reg,
unsigned int num_reg, unsigned int bursts,
unsigned long tmo_ms);
#else
static inline int stm32_timers_dma_burst_read(struct device *dev, u32 *buf,
enum stm32_timers_dmas id,
u32 reg,
unsigned int num_reg,
unsigned int bursts,
unsigned long tmo_ms)
{
return -ENODEV;
}
#endif
#endif