FM / mach-omap1

/usr/src/kernels/4.18.0-553.121.1.el8_10.x86_64/arch/arm/mach-omap1/

/usr/src/kernels/4.18.0-553.121.1.el8_10.x86_64/arch/arm/mach-omap1

Name	Size	Mode	Actions
Kconfig	5163	0644	edit dl rm
Makefile	1881	0644	edit dl rm
Makefile.boot	87	0644	edit dl rm

Edit: /usr/src/kernels/4.18.0-553.121.1.el8_10.x86_64/arch/arm/mach-omap1/Makefile (1881B)

# SPDX-License-Identifier: GPL-2.0
#
# Makefile for the linux kernel.
#

# Common support
obj-y := io.o id.o sram-init.o sram.o time.o irq.o mux.o flash.o \
	 serial.o devices.o dma.o fb.o
obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o timer.o

ifneq ($(CONFIG_SND_OMAP_SOC_MCBSP),)
obj-y += mcbsp.o
endif

obj-$(CONFIG_OMAP_32K_TIMER)	+= timer32k.o

# OCPI interconnect support for 1710, 1610 and 5912
obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o

# Power Management
obj-$(CONFIG_PM) += pm.o sleep.o

i2c-omap-$(CONFIG_I2C_OMAP)		:= i2c.o
obj-y					+= $(i2c-omap-m) $(i2c-omap-y)

led-y := leds.o

usb-fs-$(CONFIG_USB)			:= usb.o
obj-y					+= $(usb-fs-m) $(usb-fs-y)

# Specific board support
obj-$(CONFIG_MACH_OMAP_H2)		+= board-h2.o board-h2-mmc.o \
					   board-nand.o
obj-$(CONFIG_MACH_OMAP_INNOVATOR)	+= board-innovator.o
obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o
obj-$(CONFIG_MACH_OMAP_PERSEUS2)	+= board-perseus2.o board-nand.o
obj-$(CONFIG_MACH_OMAP_FSAMPLE)		+= board-fsample.o board-nand.o
obj-$(CONFIG_MACH_OMAP_OSK)		+= board-osk.o
obj-$(CONFIG_MACH_OMAP_H3)		+= board-h3.o board-h3-mmc.o \
					   board-nand.o
obj-$(CONFIG_MACH_OMAP_PALMTE)		+= board-palmte.o
obj-$(CONFIG_MACH_OMAP_PALMZ71)		+= board-palmz71.o
obj-$(CONFIG_MACH_OMAP_PALMTT)		+= board-palmtt.o
obj-$(CONFIG_MACH_NOKIA770)		+= board-nokia770.o
obj-$(CONFIG_MACH_AMS_DELTA)		+= board-ams-delta.o ams-delta-fiq.o \
					   ams-delta-fiq-handler.o
obj-$(CONFIG_MACH_SX1)			+= board-sx1.o board-sx1-mmc.o
obj-$(CONFIG_MACH_HERALD)		+= board-htcherald.o

ifeq ($(CONFIG_ARCH_OMAP15XX),y)
# Innovator-1510 FPGA
obj-$(CONFIG_MACH_OMAP_INNOVATOR)	+= fpga.o
endif

# GPIO
obj-$(CONFIG_ARCH_OMAP730)		+= gpio7xx.o
obj-$(CONFIG_ARCH_OMAP850)		+= gpio7xx.o
obj-$(CONFIG_ARCH_OMAP15XX)		+= gpio15xx.o
obj-$(CONFIG_ARCH_OMAP16XX)		+= gpio16xx.o

ifneq ($(CONFIG_FB_OMAP),)
obj-y += lcd_dma.o
endif

cmd: