/
usr
/
src
/
kernels
/
4.18.0-553.121.1.el8_10.x86_64
/
arch
/
powerpc
/
platforms
/
52xx
/
/usr/src/kernels/4.18.0-553.121.1.el8_10.x86_64/arch/powerpc/platforms/52xx
mkdir
upload
Name
Size
Mode
Actions
Kconfig
1734
0644
edit
dl
rm
Makefile
530
0644
edit
dl
rm
Edit:
/usr/src/kernels/4.18.0-553.121.1.el8_10.x86_64/arch/powerpc/platforms/52xx/Kconfig
(1734B)
# SPDX-License-Identifier: GPL-2.0 config PPC_MPC52xx bool "52xx-based boards" depends on 6xx select COMMON_CLK select PPC_PCI_CHOICE config PPC_MPC5200_SIMPLE bool "Generic support for simple MPC5200 based boards" depends on PPC_MPC52xx select DEFAULT_UIMAGE help This option enables support for a simple MPC52xx based boards which do not need a custom platform specific setup. Such boards are supported assuming the following: - GPIO pins are configured by the firmware, - CDM configuration (clocking) is setup correctly by firmware, - if the 'fsl,has-wdt' property is present in one of the gpt nodes, then it is safe to use such gpt to reset the board, - PCI is supported if enabled in the kernel configuration and if there is a PCI bus node defined in the device tree. Boards that are compatible with this generic platform support are: intercontrol,digsy-mtc phytec,pcm030 phytec,pcm032 promess,motionpro schindler,cm5200 tqc,tqm5200 config PPC_EFIKA bool "bPlan Efika 5k2. MPC5200B based computer" depends on PPC_MPC52xx select PPC_RTAS select PPC_NATIVE config PPC_LITE5200 bool "Freescale Lite5200 Eval Board" depends on PPC_MPC52xx select DEFAULT_UIMAGE config PPC_MEDIA5200 bool "Freescale Media5200 Eval Board" depends on PPC_MPC52xx select DEFAULT_UIMAGE config PPC_MPC5200_BUGFIX bool "MPC5200 (L25R) bugfix support" depends on PPC_MPC52xx help Enable workarounds for original MPC5200 errata. This is not required for MPC5200B based boards. It is safe to say 'Y' here config PPC_MPC5200_LPBFIFO tristate "MPC5200 LocalPlus bus FIFO driver" depends on PPC_MPC52xx && PPC_BESTCOMM select PPC_BESTCOMM_GEN_BD
Save
cmd:
run