/
usr
/
src
/
kernels
/
4.18.0-553.121.1.el8_10.x86_64
/
drivers
/
pci
/
/usr/src/kernels/4.18.0-553.121.1.el8_10.x86_64/drivers/pci
mkdir
upload
Name
Size
Mode
Actions
controller/
-
0755
rm
endpoint/
-
0755
rm
hotplug/
-
0755
rm
pcie/
-
0755
rm
switch/
-
0755
rm
Kconfig
7524
0644
edit
dl
rm
Makefile
1155
0644
edit
dl
rm
Edit:
/usr/src/kernels/4.18.0-553.121.1.el8_10.x86_64/drivers/pci/Kconfig
(7524B)
# SPDX-License-Identifier: GPL-2.0 # # PCI configuration # source "drivers/pci/pcie/Kconfig" config PCI_MSI bool "Message Signaled Interrupts (MSI and MSI-X)" depends on PCI select GENERIC_MSI_IRQ help This allows device drivers to enable MSI (Message Signaled Interrupts). Message Signaled Interrupts enable a device to generate an interrupt using an inbound Memory Write on its PCI bus instead of asserting a device IRQ pin. Use of PCI MSI interrupts can be disabled at kernel boot time by using the 'pci=nomsi' option. This disables MSI for the entire system. If you don't know what to do here, say Y. config PCI_MSI_IRQ_DOMAIN def_bool ARC || ARM || ARM64 || X86 depends on PCI_MSI select GENERIC_MSI_IRQ_DOMAIN config PCI_MSI_ARCH_FALLBACKS bool config PCI_QUIRKS default y bool "Enable PCI quirk workarounds" if EXPERT depends on PCI help This enables workarounds for various PCI chipset bugs/quirks. Disable this only if your target machine is unaffected by PCI quirks. config PCI_DEBUG bool "PCI Debugging" depends on PCI && DEBUG_KERNEL help Say Y here if you want the PCI core to produce a bunch of debug messages to the system log. Select this if you are having a problem with PCI support and want to see more of what is going on. When in doubt, say N. config PCI_REALLOC_ENABLE_AUTO bool "Enable PCI resource re-allocation detection" depends on PCI depends on PCI_IOV help Say Y here if you want the PCI core to detect if PCI resource re-allocation needs to be enabled. You can always use pci=realloc=on or pci=realloc=off to override it. It will automatically re-allocate PCI resources if SR-IOV BARs have not been allocated by the BIOS. When in doubt, say N. config PCI_STUB tristate "PCI Stub driver" depends on PCI help Say Y or M here if you want be able to reserve a PCI device when it is going to be assigned to a guest operating system. When in doubt, say N. config PCI_PF_STUB tristate "PCI PF Stub driver" depends on PCI depends on PCI_IOV help Say Y or M here if you want to enable support for devices that require SR-IOV support, while at the same time the PF (Physical Function) itself is not providing any actual services on the host itself such as storage or networking. When in doubt, say N. config XEN_PCIDEV_FRONTEND tristate "Xen PCI Frontend" depends on X86 && XEN select PCI_XEN select XEN_XENBUS_FRONTEND default y help The PCI device frontend driver allows the kernel to import arbitrary PCI devices from a PCI backend to support PCI driver domains. config PCI_ATS bool config PCI_ECAM bool config PCI_LOCKLESS_CONFIG bool config PCI_IOV bool "PCI IOV support" depends on PCI select PCI_ATS help I/O Virtualization is a PCI feature supported by some devices which allows them to create virtual devices which share their physical resources. If unsure, say N. config PCI_PRI bool "PCI PRI support" depends on PCI select PCI_ATS help PRI is the PCI Page Request Interface. It allows PCI devices that are behind an IOMMU to recover from page faults. If unsure, say N. config PCI_PASID bool "PCI PASID support" depends on PCI select PCI_ATS help Process Address Space Identifiers (PASIDs) can be used by PCI devices to access more than one IO address space at the same time. To make use of this feature an IOMMU is required which also supports PASIDs. Select this option if you have such an IOMMU and want to compile the driver for it into your kernel. If unsure, say N. config PCI_P2PDMA bool "PCI peer-to-peer transfer support" depends on PCI && ZONE_DEVICE select GENERIC_ALLOCATOR help Enableѕ drivers to do PCI peer-to-peer transactions to and from BARs that are exposed in other devices that are the part of the hierarchy where peer-to-peer DMA is guaranteed by the PCI specification to work (ie. anything below a single PCI bridge). Many PCIe root complexes do not support P2P transactions and it's hard to tell which support it at all, so at this time, P2P DMA transactions must be between devices behind the same root port. If unsure, say N. config PCI_LABEL def_bool y if (DMI || ACPI) depends on PCI select NLS config PCI_HYPERV tristate "Hyper-V PCI Frontend" depends on ((X86 && X86_64) || ARM64) && HYPERV && PCI_MSI && PCI_MSI_IRQ_DOMAIN && SYSFS select PCI_HYPERV_INTERFACE help The PCI device frontend driver allows the kernel to import arbitrary PCI devices from a PCI backend to support PCI driver domains. choice prompt "PCI Express hierarchy optimization setting" default PCIE_BUS_DEFAULT depends on PCI && EXPERT help MPS (Max Payload Size) and MRRS (Max Read Request Size) are PCIe device parameters that affect performance and the ability to support hotplug and peer-to-peer DMA. The following choices set the MPS and MRRS optimization strategy at compile-time. The choices are the same as those offered for the kernel command-line parameter 'pci', i.e., 'pci=pcie_bus_tune_off', 'pci=pcie_bus_safe', 'pci=pcie_bus_perf', and 'pci=pcie_bus_peer2peer'. This is a compile-time setting and can be overridden by the above command-line parameters. If unsure, choose PCIE_BUS_DEFAULT. config PCIE_BUS_TUNE_OFF bool "Tune Off" depends on PCI help Use the BIOS defaults; don't touch MPS at all. This is the same as booting with 'pci=pcie_bus_tune_off'. config PCIE_BUS_DEFAULT bool "Default" depends on PCI help Default choice; ensure that the MPS matches upstream bridge. config PCIE_BUS_SAFE bool "Safe" depends on PCI help Use largest MPS that boot-time devices support. If you have a closed system with no possibility of adding new devices, this will use the largest MPS that's supported by all devices. This is the same as booting with 'pci=pcie_bus_safe'. config PCIE_BUS_PERFORMANCE bool "Performance" depends on PCI help Use MPS and MRRS for best performance. Ensure that a given device's MPS is no larger than its parent MPS, which allows us to keep all switches/bridges to the max MPS supported by their parent. This is the same as booting with 'pci=pcie_bus_perf'. config PCIE_BUS_PEER2PEER bool "Peer2peer" depends on PCI help Set MPS = 128 for all devices. MPS configuration effected by the other options could cause the MPS on one root port to be different than that of the MPS on another, which may cause hot-added devices or peer-to-peer DMA to fail. Set MPS to the smallest possible value (128B) system-wide to avoid these issues. This is the same as booting with 'pci=pcie_bus_peer2peer'. endchoice config VGA_ARB bool "VGA Arbitration" if EXPERT default y depends on (PCI && !S390) help Some "legacy" VGA devices implemented on PCI typically have the same hard-decoded addresses as they did on ISA. When multiple PCI devices are accessed at same time they need some kind of coordination. Please see Documentation/gpu/vgaarbiter.rst for more details. Select this to enable VGA arbiter. config VGA_ARB_MAX_GPUS int "Maximum number of GPUs" default 16 depends on VGA_ARB help Reserves space in the kernel to maintain resource locking for multiple GPUS. The overhead for each GPU is very small. source "drivers/pci/hotplug/Kconfig" source "drivers/pci/controller/Kconfig" source "drivers/pci/endpoint/Kconfig" source "drivers/pci/switch/Kconfig"
Save
cmd:
run