FM / ddbridge

/usr/src/kernels/4.18.0-553.157.1.el8_10.x86_64/drivers/media/pci/ddbridge/

/usr/src/kernels/4.18.0-553.157.1.el8_10.x86_64/drivers/media/pci/ddbridge

Name	Size	Mode	Actions
Kconfig	1844	0644	edit dl rm
Makefile	332	0644	edit dl rm

Edit: /usr/src/kernels/4.18.0-553.157.1.el8_10.x86_64/drivers/media/pci/ddbridge/Kconfig (1844B)

config DVB_DDBRIDGE
	tristate "Digital Devices bridge support"
	depends on DVB_CORE && PCI && I2C
	select DVB_LNBP21 if MEDIA_SUBDRV_AUTOSELECT
	select DVB_STV6110x if MEDIA_SUBDRV_AUTOSELECT
	select DVB_STV090x if MEDIA_SUBDRV_AUTOSELECT
	select DVB_DRXK if MEDIA_SUBDRV_AUTOSELECT
	select DVB_TDA18271C2DD if MEDIA_SUBDRV_AUTOSELECT
	select DVB_STV0367 if MEDIA_SUBDRV_AUTOSELECT
	select DVB_CXD2841ER if MEDIA_SUBDRV_AUTOSELECT
	select DVB_STV0910 if MEDIA_SUBDRV_AUTOSELECT
	select DVB_STV6111 if MEDIA_SUBDRV_AUTOSELECT
	select DVB_LNBH25 if MEDIA_SUBDRV_AUTOSELECT
	select MEDIA_TUNER_TDA18212 if MEDIA_SUBDRV_AUTOSELECT
	select DVB_MXL5XX if MEDIA_SUBDRV_AUTOSELECT
	select DVB_CXD2099 if MEDIA_SUBDRV_AUTOSELECT
	select DVB_DUMMY_FE if MEDIA_SUBDRV_AUTOSELECT
	help
	  Support for cards with the Digital Devices PCI express bridge:
	  - Octopus PCIe Bridge
	  - Octopus mini PCIe Bridge
	  - Octopus LE
	  - DuoFlex S2 Octopus
	  - DuoFlex CT Octopus
	  - cineS2(v6)
	  - CineCTv6 and DuoFlex CT (STV0367-based)
	  - CineCTv7 and DuoFlex CT2/C2T2/C2T2I (Sony CXD28xx-based)
	  - MaxA8 series
	  - CineS2 V7/V7A and DuoFlex S2 V4 (ST STV0910-based)
	  - Max S4/8

Say Y if you own such a card and want to use it.

config DVB_DDBRIDGE_MSIENABLE
	bool "Enable Message Signaled Interrupts (MSI) per default (EXPERIMENTAL)"
	depends on DVB_DDBRIDGE
	depends on PCI_MSI
	default n
	help
	  Use PCI MSI (Message Signaled Interrupts) per default. Enabling this
	  might lead to I2C errors originating from the bridge in conjunction
	  with certain SATA controllers, requiring a reload of the ddbridge
	  module. MSI can still be disabled by passing msi=0 as option, as
	  this will just change the msi option default value.

If you're unsure, concerned about stability and don't want to pass
	  module options in case of troubles, say N.

cmd: