/
usr
/
src
/
kernels
/
4.18.0-553.157.1.el8_10.x86_64
/
drivers
/
net
/
wireless
/
st
/
cw1200
/
/usr/src/kernels/4.18.0-553.157.1.el8_10.x86_64/drivers/net/wireless/st/cw1200
mkdir
upload
Name
Size
Mode
Actions
Kconfig
941
0644
edit
dl
rm
Makefile
434
0644
edit
dl
rm
Edit:
/usr/src/kernels/4.18.0-553.157.1.el8_10.x86_64/drivers/net/wireless/st/cw1200/Kconfig
(941B)
config CW1200 tristate "CW1200 WLAN support" depends on MAC80211 && CFG80211 help This is a driver for the ST-E CW1100 & CW1200 WLAN chipsets. This option just enables the driver core, see below for specific bus support. if CW1200 config CW1200_WLAN_SDIO tristate "Support SDIO platforms" depends on CW1200 && MMC help Enable support for the CW1200 connected via an SDIO bus. By default this driver only supports the Sagrad SG901-1091/1098 EVK and similar designs that utilize a hardware reset circuit. To support different CW1200 SDIO designs you will need to override the default platform data by calling cw1200_sdio_set_platform_data() in your board setup file. config CW1200_WLAN_SPI tristate "Support SPI platforms" depends on CW1200 && SPI help Enables support for the CW1200 connected via a SPI bus. You will need to add appropriate platform data glue in your board setup file. endif
Save
cmd:
run