FM / pinctrl

/usr/src/kernels/4.18.0-553.157.1.el8_10.x86_64/include/dt-bindings/pinctrl/

/usr/src/kernels/4.18.0-553.157.1.el8_10.x86_64/include/dt-bindings/pinctrl

Name	Size	Mode	Actions
am33xx.h	1043	0644	edit dl rm
am43xx.h	1758	0644	edit dl rm
at91.h	1245	0644	edit dl rm
bcm2835.h	911	0644	edit dl rm
brcm,pinctrl-stingray.h	2718	0644	edit dl rm
dm814x.h	1277	0644	edit dl rm
dra.h	2693	0644	edit dl rm
hisi.h	2069	0644	edit dl rm
keystone.h	1167	0644	edit dl rm
mt65xx.h	1210	0644	edit dl rm
mt6397-pinfunc.h	13432	0644	edit dl rm
mt7623-pinfunc.h	32417	0644	edit dl rm
nomadik.h	758	0644	edit dl rm
omap.h	3076	0644	edit dl rm
pinctrl-tegra-xusb.h	240	0644	edit dl rm
pinctrl-tegra.h	1466	0644	edit dl rm
qcom,pmic-gpio.h	5402	0644	edit dl rm
qcom,pmic-mpp.h	2721	0644	edit dl rm
r7s72100-pinctrl.h	517	0644	edit dl rm
rockchip.h	1571	0644	edit dl rm
samsung.h	2481	0644	edit dl rm
stm32-pinfunc.h	814	0644	edit dl rm
sun4i-a10.h	2606	0644	edit dl rm

Edit: /usr/src/kernels/4.18.0-553.157.1.el8_10.x86_64/include/dt-bindings/pinctrl/am43xx.h (1758B)

/* SPDX-License-Identifier: GPL-2.0 */
/*
 * This header provides constants specific to AM43XX pinctrl bindings.
 */

#ifndef _DT_BINDINGS_PINCTRL_AM43XX_H
#define _DT_BINDINGS_PINCTRL_AM43XX_H

#define MUX_MODE0	0
#define MUX_MODE1	1
#define MUX_MODE2	2
#define MUX_MODE3	3
#define MUX_MODE4	4
#define MUX_MODE5	5
#define MUX_MODE6	6
#define MUX_MODE7	7
#define MUX_MODE8	8
#define MUX_MODE9	9

#define PULL_DISABLE		(1 << 16)
#define PULL_UP			(1 << 17)
#define INPUT_EN		(1 << 18)
#define SLEWCTRL_SLOW		(1 << 19)
#define SLEWCTRL_FAST		0
#define DS0_FORCE_OFF_MODE	(1 << 24)
#define DS0_INPUT		(1 << 25)
#define DS0_FORCE_OUT_HIGH	(1 << 26)
#define DS0_PULL_UP_DOWN_EN	(0 << 27)
#define DS0_PULL_UP_DOWN_DIS	(1 << 27)
#define DS0_PULL_UP_SEL		(1 << 28)
#define WAKEUP_ENABLE		(1 << 29)

#define DS0_PIN_OUTPUT		(DS0_FORCE_OFF_MODE)
#define DS0_PIN_OUTPUT_HIGH	(DS0_FORCE_OFF_MODE | DS0_FORCE_OUT_HIGH)
#define DS0_PIN_OUTPUT_PULLUP	(DS0_FORCE_OFF_MODE | DS0_PULL_UP_DOWN_EN | DS0_PULL_UP_SEL)
#define DS0_PIN_OUTPUT_PULLDOWN	(DS0_FORCE_OFF_MODE | DS0_PULL_UP_DOWN_EN)
#define DS0_PIN_INPUT		(DS0_FORCE_OFF_MODE | DS0_INPUT)
#define DS0_PIN_INPUT_PULLUP	(DS0_FORCE_OFF_MODE | DS0_INPUT | DS0_PULL_UP_DOWN_EN | DS0_PULL_UP_SEL)
#define DS0_PIN_INPUT_PULLDOWN	(DS0_FORCE_OFF_MODE | DS0_INPUT | DS0_PULL_UP_DOWN_EN)

#define PIN_OUTPUT		(PULL_DISABLE)
#define PIN_OUTPUT_PULLUP	(PULL_UP)
#define PIN_OUTPUT_PULLDOWN	0
#define PIN_INPUT		(INPUT_EN | PULL_DISABLE)
#define PIN_INPUT_PULLUP	(INPUT_EN | PULL_UP)
#define PIN_INPUT_PULLDOWN	(INPUT_EN)

/*
 * Macro to allow using the absolute physical address instead of the
 * padconf registers instead of the offset from padconf base.
 */
#define AM4372_IOPAD(pa, val)	(((pa) & 0xffff) - 0x0800) (val)

#endif

cmd: