FM / linux

/usr/src/kernels/4.18.0-553.157.1.el8_10.x86_64/include/linux/

/usr/src/kernels/4.18.0-553.157.1.el8_10.x86_64/include/linux

Name	Size	Mode	Actions
amba/	-	0755	rm
avf/	-	0755	rm
bcma/	-	0755	rm
byteorder/	-	0755	rm
can/	-	0755	rm
ceph/	-	0755	rm
clk/	-	0755	rm
crush/	-	0755	rm
decompress/	-	0755	rm
dma/	-	0755	rm
dsa/	-	0755	rm
extcon/	-	0755	rm
firmware/	-	0755	rm
fpga/	-	0755	rm
fsl/	-	0755	rm
gpio/	-	0755	rm
hsi/	-	0755	rm
iio/	-	0755	rm
input/	-	0755	rm
irqchip/	-	0755	rm
isdn/	-	0755	rm
lockd/	-	0755	rm
mailbox/	-	0755	rm
mfd/	-	0755	rm
mlx4/	-	0755	rm
mlx5/	-	0755	rm
mmc/	-	0755	rm
mtd/	-	0755	rm
mux/	-	0755	rm
net/	-	0755	rm
netfilter/	-	0755	rm
netfilter_arp/	-	0755	rm
netfilter_bridge/	-	0755	rm
netfilter_ipv4/	-	0755	rm
netfilter_ipv6/	-	0755	rm
pcs/	-	0755	rm
perf/	-	0755	rm
phy/	-	0755	rm
pinctrl/	-	0755	rm
platform_data/	-	0755	rm
power/	-	0755	rm
qed/	-	0755	rm
raid/	-	0755	rm
regulator/	-	0755	rm
remoteproc/	-	0755	rm
reset/	-	0755	rm
rpmsg/	-	0755	rm
rtc/	-	0755	rm
sched/	-	0755	rm
soc/	-	0755	rm
soundwire/	-	0755	rm
spi/	-	0755	rm
ssb/	-	0755	rm
sunrpc/	-	0755	rm
ulpi/	-	0755	rm
unaligned/	-	0755	rm
usb/	-	0755	rm
uwb/	-	0755	rm
wimax/	-	0755	rm
8250_pci.h	1038	0644	edit dl rm
a.out.h	354	0644	edit dl rm
acct.h	2551	0644	edit dl rm
acpi.h	43130	0644	edit dl rm
acpi_apmt.h	367	0644	edit dl rm
acpi_dma.h	3300	0644	edit dl rm
acpi_iort.h	3235	0644	edit dl rm
acpi_pmtmr.h	674	0644	edit dl rm
adb.h	1832	0644	edit dl rm
adfs_fs.h	574	0644	edit dl rm
adxl.h	310	0644	edit dl rm
aer.h	1822	0644	edit dl rm
agpgart.h	3908	0644	edit dl rm
agp_backend.h	3534	0644	edit dl rm
ahci-remap.h	607	0644	edit dl rm
ahci_platform.h	1772	0644	edit dl rm
aio.h	651	0644	edit dl rm
alarmtimer.h	1875	0644	edit dl rm
altera_jtaguart.h	379	0644	edit dl rm
altera_uart.h	397	0644	edit dl rm
amd-iommu.h	6931	0644	edit dl rm
amd-pstate.h	3356	0644	edit dl rm
anon_inodes.h	494	0644	edit dl rm
aperture.h	1619	0644	edit dl rm
apm-emulation.h	1575	0644	edit dl rm
apm_bios.h	2746	0644	edit dl rm
apple-gmux.h	1459	0644	edit dl rm
apple_bl.h	498	0644	edit dl rm
arch_topology.h	1983	0644	edit dl rm
arm-cci.h	2058	0644	edit dl rm
arm-smccc.h	16066	0644	edit dl rm
arm_sdei.h	2641	0644	edit dl rm
array_size.h	332	0644	edit dl rm
ascii85.h	532	0644	edit dl rm
asn1.h	2039	0644	edit dl rm
asn1_ber_bytecode.h	2783	0644	edit dl rm
asn1_decoder.h	675	0644	edit dl rm
assoc_array.h	3156	0644	edit dl rm
assoc_array_priv.h	5630	0644	edit dl rm
async.h	4591	0644	edit dl rm
async_tx.h	7487	0644	edit dl rm
ata.h	33980	0644	edit dl rm
atalk.h	4550	0644	edit dl rm
ata_platform.h	729	0644	edit dl rm
ath9k_platform.h	1477	0644	edit dl rm
atm.h	287	0644	edit dl rm
atmdev.h	10457	0644	edit dl rm
atmel-mci.h	1429	0644	edit dl rm
atmel-ssc.h	9971	0644	edit dl rm
atmel_pdc.h	1502	0644	edit dl rm
atmel_tc.h	11600	0644	edit dl rm
atm_suni.h	253	0644	edit dl rm
atm_tcp.h	511	0644	edit dl rm
atomic.h	37546	0644	edit dl rm
attribute_container.h	2799	0644	edit dl rm
audit.h	20332	0644	edit dl rm
audit_arch.h	559	0644	edit dl rm
auto_dev-ioctl.h	454	0644	edit dl rm
auto_fs.h	436	0644	edit dl rm
auxiliary_bus.h	2787	0644	edit dl rm
auxvec.h	304	0644	edit dl rm
average.h	2481	0644	edit dl rm
b1pcmcia.h	666	0644	edit dl rm
backing-dev-defs.h	10327	0644	edit dl rm
backing-dev.h	12260	0644	edit dl rm
backlight.h	13447	0644	edit dl rm
badblocks.h	2188	0644	edit dl rm
balloon_compaction.h	6745	0644	edit dl rm
bcd.h	559	0644	edit dl rm
bch.h	2660	0644	edit dl rm
bcm47xx_nvram.h	1247	0644	edit dl rm
bcm47xx_sprom.h	600	0644	edit dl rm
bcm47xx_wdt.h	555	0644	edit dl rm
bcm963xx_nvram.h	3036	0644	edit dl rm
bcm963xx_tag.h	3685	0644	edit dl rm
binfmts.h	5443	0644	edit dl rm
bio.h	20690	0644	edit dl rm
bitfield.h	5899	0644	edit dl rm
bitmap.h	21496	0644	edit dl rm
bitops.h	8870	0644	edit dl rm
bitrev.h	2541	0644	edit dl rm
bits.h	1512	0644	edit dl rm
bit_spinlock.h	2360	0644	edit dl rm
blk-cgroup.h	22728	0644	edit dl rm
blk-mq-pci.h	269	0644	edit dl rm
blk-mq-rdma.h	234	0644	edit dl rm
blk-mq-virtio.h	293	0644	edit dl rm
blk-mq.h	16074	0644	edit dl rm
blk-pm.h	717	0644	edit dl rm
blkdev.h	58898	0644	edit dl rm
blkpg.h	436	0644	edit dl rm
blktrace_api.h	3777	0644	edit dl rm
blk_types.h	15342	0644	edit dl rm
blockgroup_lock.h	810	0644	edit dl rm
bma150.h	1938	0644	edit dl rm
bottom_half.h	803	0644	edit dl rm
bpf-cgroup.h	19818	0644	edit dl rm
bpf-netns.h	1559	0644	edit dl rm
bpf.h	73387	0644	edit dl rm
bpfilter.h	791	0644	edit dl rm
bpfptr.h	1733	0644	edit dl rm
bpf_lirc.h	698	0644	edit dl rm
bpf_local_storage.h	5349	0644	edit dl rm
bpf_lsm.h	1431	0644	edit dl rm
bpf_trace.h	166	0644	edit dl rm
bpf_types.h	5395	0644	edit dl rm
bpf_verifier.h	18791	0644	edit dl rm
brcmphy.h	14023	0644	edit dl rm
bsearch.h	275	0644	edit dl rm
bsg-lib.h	2455	0644	edit dl rm
bsg.h	1094	0644	edit dl rm
btf.h	7363	0644	edit dl rm
btf_ids.h	5174	0644	edit dl rm
btree-128.h	2737	0644	edit dl rm
btree-type.h	3991	0644	edit dl rm
btree.h	6999	0644	edit dl rm
btrfs.h	145	0644	edit dl rm
buffer_head.h	14379	0644	edit dl rm
bug.h	1967	0644	edit dl rm
buildid.h	248	0644	edit dl rm
build_bug.h	3066	0644	edit dl rm
bvec.h	4119	0644	edit dl rm
c2port.h	1529	0644	edit dl rm
cache.h	2182	0644	edit dl rm
cacheinfo.h	4796	0644	edit dl rm
capability.h	8179	0644	edit dl rm
cb710.h	5827	0644	edit dl rm
cciss_ioctl.h	1053	0644	edit dl rm
ccp.h	18697	0644	edit dl rm
cc_platform.h	3140	0644	edit dl rm
cdev.h	845	0644	edit dl rm
cdrom.h	9193	0644	edit dl rm
cfag12864b.h	1499	0644	edit dl rm
cgroup-defs.h	27242	0644	edit dl rm
cgroup.h	28880	0644	edit dl rm
cgroup_rdma.h	1358	0644	edit dl rm
cgroup_subsys.h	1259	0644	edit dl rm
circ_buf.h	1120	0644	edit dl rm
cleancache.h	3982	0644	edit dl rm
cleanup.h	14215	0644	edit dl rm
clk-provider.h	37542	0644	edit dl rm
clk.h	25157	0644	edit dl rm
clkdev.h	1698	0644	edit dl rm
clockchips.h	7445	0644	edit dl rm
clocksource.h	9188	0644	edit dl rm
clock_cooling.h	2106	0644	edit dl rm
cm4000_cs.h	199	0644	edit dl rm
cma.h	1212	0644	edit dl rm
cmdline-parser.h	1238	0644	edit dl rm
cnt32_to_63.h	3691	0644	edit dl rm
cn_proc.h	1890	0644	edit dl rm
coda.h	2244	0644	edit dl rm
coda_psdev.h	2692	0644	edit dl rm
compaction.h	7654	0644	edit dl rm
compat.h	35739	0644	edit dl rm
compat_time.h	499	0644	edit dl rm
compiler-clang.h	2446	0644	edit dl rm
compiler-gcc.h	5756	0644	edit dl rm
compiler-intel.h	949	0644	edit dl rm
compiler.h	15718	0644	edit dl rm
compiler_attributes.h	10600	0644	edit dl rm
compiler_types.h	6931	0644	edit dl rm
completion.h	4201	0644	edit dl rm
component.h	4459	0644	edit dl rm
concap.h	3778	0644	edit dl rm
configfs.h	9441	0644	edit dl rm
connector.h	2490	0644	edit dl rm
console.h	7504	0644	edit dl rm
consolemap.h	1068	0644	edit dl rm
console_struct.h	6966	0644	edit dl rm
const.h	421	0644	edit dl rm
container.h	668	0644	edit dl rm
container_of.h	1278	0644	edit dl rm
context_tracking.h	5168	0644	edit dl rm
context_tracking_state.h	1529	0644	edit dl rm
cookie.h	1254	0644	edit dl rm
cordic.h	1794	0644	edit dl rm
coredump.h	797	0644	edit dl rm
coresight-pmu.h	989	0644	edit dl rm
coresight-stm.h	152	0644	edit dl rm
coresight.h	9676	0644	edit dl rm
counter.h	15497	0644	edit dl rm
counter_enum.h	1463	0644	edit dl rm
count_zeros.h	1660	0644	edit dl rm
cper.h	16826	0644	edit dl rm
cpu.h	7959	0644	edit dl rm
cpufeature.h	1882	0644	edit dl rm
cpufreq.h	34248	0644	edit dl rm
cpuhotplug.h	14269	0644	edit dl rm
cpuidle.h	13061	0644	edit dl rm
cpuidle_haltpoll.h	312	0644	edit dl rm
cpumask.h	29721	0644	edit dl rm
cpuset.h	8297	0644	edit dl rm
cpu_cooling.h	2389	0644	edit dl rm
cpu_pm.h	2850	0644	edit dl rm
cpu_rmap.h	1902	0644	edit dl rm
crash_core.h	3292	0644	edit dl rm
crash_dump.h	5193	0644	edit dl rm
crc-ccitt.h	609	0644	edit dl rm
crc-itu-t.h	613	0644	edit dl rm
crc-t10dif.h	453	0644	edit dl rm
crc4.h	192	0644	edit dl rm
crc7.h	316	0644	edit dl rm
crc8.h	3747	0644	edit dl rm
crc16.h	622	0644	edit dl rm
crc32.h	2894	0644	edit dl rm
crc32c.h	331	0644	edit dl rm
crc32poly.h	610	0644	edit dl rm
cred.h	12749	0644	edit dl rm
crypto.h	59393	0644	edit dl rm
cryptohash.h	546	0644	edit dl rm
cs5535.h	6426	0644	edit dl rm
ctype.h	1791	0644	edit dl rm
cuda.h	501	0644	edit dl rm
cxl_err.h	468	0644	edit dl rm
cyclades.h	10607	0644	edit dl rm
damon.h	19616	0644	edit dl rm
davinci_emac.h	1150	0644	edit dl rm
dax.h	7553	0644	edit dl rm
dca.h	2698	0644	edit dl rm
dcache.h	19621	0644	edit dl rm
dccp.h	10989	0644	edit dl rm
dcookies.h	1329	0644	edit dl rm
debugfs.h	11921	0644	edit dl rm
debugobjects.h	3988	0644	edit dl rm
debug_locks.h	1627	0644	edit dl rm
delay.h	2335	0644	edit dl rm
delayacct.h	6285	0644	edit dl rm
delayed_call.h	709	0644	edit dl rm
dell-led.h	128	0644	edit dl rm
devcoredump.h	2849	0644	edit dl rm
devfreq-event.h	5778	0644	edit dl rm
devfreq.h	12987	0644	edit dl rm
devfreq_cooling.h	3608	0644	edit dl rm
device-mapper.h	19529	0644	edit dl rm
device.h	67275	0644	edit dl rm
device_cgroup.h	1680	0644	edit dl rm
devm-helpers.h	2740	0644	edit dl rm
devpts_fs.h	1314	0644	edit dl rm
dev_printk.h	7731	0644	edit dl rm
digsig.h	1379	0644	edit dl rm
dim.h	8951	0644	edit dl rm
dio.h	11229	0644	edit dl rm
dirent.h	216	0644	edit dl rm
dlm.h	7240	0644	edit dl rm
dlm_plock.h	678	0644	edit dl rm
dm-bufio.h	4574	0644	edit dl rm
dm-dirty-log.h	4038	0644	edit dl rm
dm-io.h	1980	0644	edit dl rm
dm-kcopyd.h	3013	0644	edit dl rm
dm-region-hash.h	3182	0644	edit dl rm
dm9000.h	1136	0644	edit dl rm
dma-buf.h	21547	0644	edit dl rm
dma-contiguous.h	5070	0644	edit dl rm
dma-direct.h	3681	0644	edit dl rm
dma-direction.h	407	0644	edit dl rm
dma-fence-array.h	2983	0644	edit dl rm
dma-fence-chain.h	3576	0644	edit dl rm
dma-fence-unwrap.h	2298	0644	edit dl rm
dma-fence.h	21162	0644	edit dl rm
dma-iommu.h	3020	0644	edit dl rm
dma-map-ops.h	10863	0644	edit dl rm
dma-mapping.h	23170	0644	edit dl rm
dma-resv.h	17245	0644	edit dl rm
dmaengine.h	54891	0644	edit dl rm
dmapool.h	1832	0644	edit dl rm
dmar.h	8791	0644	edit dl rm
dmi.h	4375	0644	edit dl rm
dnotify.h	1047	0644	edit dl rm
dns_resolver.h	1339	0644	edit dl rm
dqblk_qtree.h	2238	0644	edit dl rm
dqblk_v1.h	327	0644	edit dl rm
dqblk_v2.h	406	0644	edit dl rm
drbd.h	10923	0644	edit dl rm
drbd_genl.h	22010	0644	edit dl rm
drbd_genl_api.h	1808	0644	edit dl rm
drbd_limits.h	8003	0644	edit dl rm
ds2782_battery.h	158	0644	edit dl rm
dtlk.h	3584	0644	edit dl rm
dw_apb_timer.h	1743	0644	edit dl rm
dynamic_debug.h	5831	0644	edit dl rm
dynamic_queue_limits.h	3812	0644	edit dl rm
earlycpio.h	359	0644	edit dl rm
ecryptfs.h	3915	0644	edit dl rm
edac.h	20718	0644	edit dl rm
edd.h	1469	0644	edit dl rm
edma.h	807	0644	edit dl rm
eeprom_93cx6.h	3008	0644	edit dl rm
eeprom_93xx46.h	776	0644	edit dl rm
efi-bgrt.h	644	0644	edit dl rm
efi.h	62813	0644	edit dl rm
efs_vh.h	1585	0644	edit dl rm
eisa.h	3031	0644	edit dl rm
elevator.h	6059	0644	edit dl rm
elf-fdpic.h	2237	0644	edit dl rm
elf-randomize.h	583	0644	edit dl rm
elf.h	1565	0644	edit dl rm
elfcore-compat.h	1267	0644	edit dl rm
elfcore.h	2160	0644	edit dl rm
elfnote.h	3625	0644	edit dl rm
enclosure.h	4711	0644	edit dl rm
energy_model.h	5994	0644	edit dl rm
err.h	1583	0644	edit dl rm
errname.h	283	0644	edit dl rm
errno.h	1424	0644	edit dl rm
error-injection.h	607	0644	edit dl rm
errqueue.h	524	0644	edit dl rm
errseq.h	382	0644	edit dl rm
etherdevice.h	16917	0644	edit dl rm
ethtool.h	35580	0644	edit dl rm
ethtool_netlink.h	1920	0644	edit dl rm
eventfd.h	2167	0644	edit dl rm
eventpoll.h	2457	0644	edit dl rm
evm.h	2985	0644	edit dl rm
export.h	3697	0644	edit dl rm
exportfs.h	7692	0644	edit dl rm
ext2_fs.h	967	0644	edit dl rm
extable.h	1309	0644	edit dl rm
extcon-provider.h	4431	0644	edit dl rm
extcon.h	10270	0644	edit dl rm
f2fs_fs.h	18526	0644	edit dl rm
f75375s.h	541	0644	edit dl rm
falloc.h	1719	0644	edit dl rm
fanotify.h	2336	0644	edit dl rm
fault-inject.h	1975	0644	edit dl rm
fb.h	28712	0644	edit dl rm
fbcon.h	2136	0644	edit dl rm
fcdevice.h	988	0644	edit dl rm
fcntl.h	1808	0644	edit dl rm
fd.h	490	0644	edit dl rm
fddidevice.h	1044	0644	edit dl rm
fdtable.h	3616	0644	edit dl rm
fec.h	609	0644	edit dl rm
file.h	3147	0644	edit dl rm
filter.h	42781	0644	edit dl rm
fips.h	167	0644	edit dl rm
firewire.h	13868	0644	edit dl rm
firmware-map.h	1351	0644	edit dl rm
firmware.h	5874	0644	edit dl rm
fixp-arith.h	4516	0644	edit dl rm
flat.h	1653	0644	edit dl rm
flex_array.h	4412	0644	edit dl rm
flex_proportions.h	2881	0644	edit dl rm
fmc-sdb.h	1319	0644	edit dl rm
fmc.h	9877	0644	edit dl rm
font.h	1598	0644	edit dl rm
fortify-string.h	16550	0644	edit dl rm
freezer.h	9257	0644	edit dl rm
frontswap.h	3121	0644	edit dl rm
fs.h	118914	0644	edit dl rm
fscache-cache.h	19254	0644	edit dl rm
fscache.h	29577	0644	edit dl rm
fscrypt.h	9441	0644	edit dl rm
fscrypt_notsupp.h	5077	0644	edit dl rm
fscrypt_supp.h	7421	0644	edit dl rm
fsi.h	2424	0644	edit dl rm
fsl-diu-fb.h	4179	0644	edit dl rm
fsldma.h	398	0644	edit dl rm
fsl_devices.h	4430	0644	edit dl rm
fsl_hypervisor.h	2824	0644	edit dl rm
fsl_ifc.h	25658	0644	edit dl rm
fsnotify.h	7796	0644	edit dl rm
fsnotify_backend.h	20665	0644	edit dl rm
fs_context.h	9097	0644	edit dl rm
fs_enet_pd.h	3457	0644	edit dl rm
fs_parser.h	4750	0644	edit dl rm
fs_pin.h	619	0644	edit dl rm
fs_stack.h	811	0644	edit dl rm
fs_struct.h	1751	0644	edit dl rm
fs_uart_pd.h	1523	0644	edit dl rm
ftrace.h	33619	0644	edit dl rm
ftrace_irq.h	1163	0644	edit dl rm
futex.h	2497	0644	edit dl rm
fwnode.h	7579	0644	edit dl rm
gameport.h	5695	0644	edit dl rm
gcd.h	193	0644	edit dl rm
genalloc.h	7950	0644	edit dl rm
generic-radix-tree.h	6671	0644	edit dl rm
genetlink.h	1379	0644	edit dl rm
genhd.h	16076	0644	edit dl rm
genl_magic_func.h	11869	0644	edit dl rm
genl_magic_struct.h	7805	0644	edit dl rm
getcpu.h	641	0644	edit dl rm
gfp.h	24208	0644	edit dl rm
glob.h	256	0644	edit dl rm
goldfish.h	605	0644	edit dl rm
gpio-pxa.h	571	0644	edit dl rm
gpio.h	5478	0644	edit dl rm
gpio_keys.h	1782	0644	edit dl rm
hardirq.h	3264	0644	edit dl rm
hash.h	2998	0644	edit dl rm
hashtable.h	6805	0644	edit dl rm
hdlc.h	3413	0644	edit dl rm
hdlcdrv.h	6470	0644	edit dl rm
hdmi.h	12851	0644	edit dl rm
hid-debug.h	1458	0644	edit dl rm
hid-roccat.h	484	0644	edit dl rm
hid-sensor-hub.h	9190	0644	edit dl rm
hid-sensor-ids.h	7617	0644	edit dl rm
hid.h	38339	0644	edit dl rm
hidden.h	966	0644	edit dl rm
hiddev.h	1458	0644	edit dl rm
hidraw.h	1146	0644	edit dl rm
highmem-internal.h	4952	0644	edit dl rm
highmem.h	8235	0644	edit dl rm
highuid.h	3194	0644	edit dl rm
hil.h	18857	0644	edit dl rm
hil_mlc.h	5249	0644	edit dl rm
hippidevice.h	1263	0644	edit dl rm
hmm.h	4656	0644	edit dl rm
host1x.h	8618	0644	edit dl rm
hpet.h	2615	0644	edit dl rm
hp_sdc.h	14352	0644	edit dl rm
hrtimer.h	16651	0644	edit dl rm
hrtimer_defs.h	660	0644	edit dl rm
htcpld.h	617	0644	edit dl rm
hugetlb.h	27496	0644	edit dl rm
hugetlb_cgroup.h	7056	0644	edit dl rm
hugetlb_inline.h	374	0644	edit dl rm
huge_mm.h	15743	0644	edit dl rm
hwmon-sysfs.h	2024	0644	edit dl rm
hwmon-vid.h	1518	0644	edit dl rm
hwmon.h	14084	0644	edit dl rm
hwspinlock.h	13044	0644	edit dl rm
hw_breakpoint.h	4405	0644	edit dl rm
hw_random.h	2377	0644	edit dl rm
hyperv.h	50010	0644	edit dl rm
hypervisor.h	748	0644	edit dl rm
i2c-algo-bit.h	2322	0644	edit dl rm
i2c-algo-pca.h	2599	0644	edit dl rm
i2c-algo-pcf.h	1926	0644	edit dl rm
i2c-dev.h	371	0644	edit dl rm
i2c-mux.h	1668	0644	edit dl rm
i2c-pxa.h	438	0644	edit dl rm
i2c-smbus.h	1991	0644	edit dl rm
i2c.h	37874	0644	edit dl rm
i8042.h	2191	0644	edit dl rm
i8253.h	809	0644	edit dl rm
icmp.h	1085	0644	edit dl rm
icmpv6.h	1732	0644	edit dl rm
ide.h	47403	0644	edit dl rm
idr.h	9715	0644	edit dl rm
ieee80211.h	153058	0644	edit dl rm
ieee802154.h	11780	0644	edit dl rm
if_arp.h	1900	0644	edit dl rm
if_bridge.h	5380	0644	edit dl rm
if_eql.h	1100	0644	edit dl rm
if_ether.h	1506	0644	edit dl rm
if_fddi.h	3526	0644	edit dl rm
if_frad.h	2937	0644	edit dl rm
if_link.h	592	0644	edit dl rm
if_ltalk.h	188	0644	edit dl rm
if_macvlan.h	2757	0644	edit dl rm
if_phonet.h	319	0644	edit dl rm
if_pppol2tp.h	727	0644	edit dl rm
if_pppox.h	2979	0644	edit dl rm
if_tap.h	2288	0644	edit dl rm
if_team.h	8297	0644	edit dl rm
if_tun.h	2050	0644	edit dl rm
if_tunnel.h	409	0644	edit dl rm
if_vlan.h	21124	0644	edit dl rm
igmp.h	4753	0644	edit dl rm
ihex.h	2001	0644	edit dl rm
ima.h	3496	0644	edit dl rm
imx-media.h	811	0644	edit dl rm
in.h	2592	0644	edit dl rm
in6.h	1893	0644	edit dl rm
indirect_call_wrapper.h	2191	0644	edit dl rm
inet.h	2918	0644	edit dl rm
inetdevice.h	8658	0644	edit dl rm
inet_diag.h	2606	0644	edit dl rm
init.h	9778	0644	edit dl rm
initrd.h	789	0644	edit dl rm
init_ohci1394_dma.h	196	0644	edit dl rm
init_task.h	1407	0644	edit dl rm
inotify.h	713	0644	edit dl rm
input-polldev.h	2074	0644	edit dl rm
input.h	19002	0644	edit dl rm
instrumented.h	2868	0644	edit dl rm
integrity.h	1074	0644	edit dl rm
intel-iommu.h	32063	0644	edit dl rm
intel-ish-client-if.h	4091	0644	edit dl rm
intel-pti.h	1600	0644	edit dl rm
intel_rapl.h	4265	0644	edit dl rm
intel_th.h	2501	0644	edit dl rm
interrupt.h	24777	0644	edit dl rm
interval_tree.h	831	0644	edit dl rm
interval_tree_generic.h	7513	0644	edit dl rm
io-64-nonatomic-hi-lo.h	2456	0644	edit dl rm
io-64-nonatomic-lo-hi.h	2456	0644	edit dl rm
io-mapping.h	5222	0644	edit dl rm
io-pgtable.h	8498	0644	edit dl rm
io.h	6201	0644	edit dl rm
ioasid.h	2174	0644	edit dl rm
ioc3.h	3214	0644	edit dl rm
ioc4.h	5920	0644	edit dl rm
iocontext.h	4878	0644	edit dl rm
iomap.h	13893	0644	edit dl rm
iommu-helper.h	1146	0644	edit dl rm
iommu.h	37180	0644	edit dl rm
iopoll.h	8175	0644	edit dl rm
ioport.h	12686	0644	edit dl rm
ioprio.h	2464	0644	edit dl rm
iosys-map.h	15311	0644	edit dl rm
iova.h	4265	0644	edit dl rm
ip.h	1235	0644	edit dl rm
ipack.h	9062	0644	edit dl rm
ipc.h	613	0644	edit dl rm
ipc_namespace.h	4682	0644	edit dl rm
ipmi-fru.h	3694	0644	edit dl rm
ipmi.h	11633	0644	edit dl rm
ipmi_smi.h	11022	0644	edit dl rm
ipv6.h	9283	0644	edit dl rm
ipv6_route.h	594	0644	edit dl rm
irq.h	41783	0644	edit dl rm
irqbypass.h	3681	0644	edit dl rm
irqchip.h	1597	0644	edit dl rm
irqdesc.h	8460	0644	edit dl rm
irqdomain.h	20645	0644	edit dl rm
irqflags.h	8105	0644	edit dl rm
irqhandler.h	362	0644	edit dl rm
irqnr.h	856	0644	edit dl rm
irqreturn.h	503	0644	edit dl rm
irq_cpustat.h	845	0644	edit dl rm
irq_poll.h	575	0644	edit dl rm
irq_sim.h	971	0644	edit dl rm
irq_work.h	1924	0644	edit dl rm
isa.h	2166	0644	edit dl rm
isapnp.h	3896	0644	edit dl rm
iscsi_boot_sysfs.h	4185	0644	edit dl rm
iscsi_ibft.h	1306	0644	edit dl rm
isdn.h	23545	0644	edit dl rm
isdnif.h	19723	0644	edit dl rm
isdn_divertif.h	1301	0644	edit dl rm
isdn_ppp.h	6797	0644	edit dl rm
isicom.h	1528	0644	edit dl rm
ism.h	2273	0644	edit dl rm
iversion.h	12670	0644	edit dl rm
jbd2.h	47971	0644	edit dl rm
jhash.h	4735	0644	edit dl rm
jiffies.h	16340	0644	edit dl rm
journal-head.h	2934	0644	edit dl rm
joystick.h	437	0644	edit dl rm
jump_label.h	15376	0644	edit dl rm
jump_label_ratelimit.h	2867	0644	edit dl rm
jz4740-adc.h	1023	0644	edit dl rm
jz4780-nemc.h	1185	0644	edit dl rm
kallsyms.h	4335	0644	edit dl rm
kasan-checks.h	1495	0644	edit dl rm
kasan.h	12678	0644	edit dl rm
kbd_diacr.h	198	0644	edit dl rm
kbd_kern.h	3931	0644	edit dl rm
kbuild.h	380	0644	edit dl rm
kconfig.h	2481	0644	edit dl rm
kcore.h	891	0644	edit dl rm
kcov.h	2463	0644	edit dl rm
kcsan-checks.h	8859	0644	edit dl rm
kcsan.h	1948	0644	edit dl rm
kdb.h	7478	0644	edit dl rm
kdebug.h	487	0644	edit dl rm
kdev_t.h	1744	0644	edit dl rm
kernel-page-flags.h	505	0644	edit dl rm
kernel.h	20616	0644	edit dl rm
kernelcapi.h	4552	0644	edit dl rm
kernel_stat.h	3031	0644	edit dl rm
kernfs.h	19336	0644	edit dl rm
kern_levels.h	1611	0644	edit dl rm
kexec.h	10896	0644	edit dl rm
key-type.h	6583	0644	edit dl rm
key.h	13149	0644	edit dl rm
keyboard.h	665	0644	edit dl rm
kfifo.h	25431	0644	edit dl rm
kgdb.h	11569	0644	edit dl rm
khugepaged.h	2832	0644	edit dl rm
klist.h	1926	0644	edit dl rm
kmemleak.h	3954	0644	edit dl rm
kmod.h	1752	0644	edit dl rm
kmsg_dump.h	2627	0644	edit dl rm
kobject.h	7727	0644	edit dl rm
kobject_ns.h	1934	0644	edit dl rm
kobj_map.h	545	0644	edit dl rm
kprobes.h	13222	0644	edit dl rm
kref.h	3361	0644	edit dl rm
ks0108.h	960	0644	edit dl rm
ks8842.h	1223	0644	edit dl rm
ks8851_mll.h	1063	0644	edit dl rm
ksm.h	2753	0644	edit dl rm
kstrtox.h	6751	0644	edit dl rm
kthread.h	7924	0644	edit dl rm
ktime.h	6607	0644	edit dl rm
kvm_dirty_ring.h	2633	0644	edit dl rm
kvm_host.h	65710	0644	edit dl rm
kvm_irqfd.h	2458	0644	edit dl rm
kvm_para.h	402	0644	edit dl rm
kvm_types.h	3264	0644	edit dl rm
l2tp.h	261	0644	edit dl rm
lapb.h	1752	0644	edit dl rm
latencytop.h	1207	0644	edit dl rm
lcd.h	3867	0644	edit dl rm
lcm.h	275	0644	edit dl rm
led-class-flash.h	5619	0644	edit dl rm
led-lm3530.h	3793	0644	edit dl rm
leds-bd2802.h	642	0644	edit dl rm
leds-lp3944.h	1099	0644	edit dl rm
leds-lp3952.h	2559	0644	edit dl rm
leds-pca9532.h	1031	0644	edit dl rm
leds-regulator.h	1317	0644	edit dl rm
leds-tca6507.h	1042	0644	edit dl rm
leds.h	15623	0644	edit dl rm
leds_pwm.h	407	0644	edit dl rm
libata.h	68540	0644	edit dl rm
libfdt.h	202	0644	edit dl rm
libfdt_env.h	491	0644	edit dl rm
libgcc.h	1099	0644	edit dl rm
libnvdimm.h	9873	0644	edit dl rm
libps2.h	2077	0644	edit dl rm
license.h	374	0644	edit dl rm
lightnvm.h	11980	0644	edit dl rm
limits.h	715	0644	edit dl rm
linear_range.h	1645	0644	edit dl rm
linkage.h	9331	0644	edit dl rm
linkmode.h	2559	0644	edit dl rm
linux_logo.h	1956	0644	edit dl rm
lis3lv02d.h	5125	0644	edit dl rm
list.h	32105	0644	edit dl rm
list_bl.h	4905	0644	edit dl rm
list_lru.h	8193	0644	edit dl rm
list_nulls.h	4322	0644	edit dl rm
list_sort.h	307	0644	edit dl rm
livepatch.h	9109	0644	edit dl rm
llc.h	749	0644	edit dl rm
llist.h	9368	0644	edit dl rm
local_lock.h	1362	0644	edit dl rm
local_lock_internal.h	3499	0644	edit dl rm
lockdep.h	21585	0644	edit dl rm
lockdep_types.h	5308	0644	edit dl rm
lockref.h	1440	0644	edit dl rm
log2.h	6542	0644	edit dl rm
logic_pio.h	3257	0644	edit dl rm
lp.h	2827	0644	edit dl rm
lru_cache.h	12722	0644	edit dl rm
lsm_audit.h	2791	0644	edit dl rm
lsm_hooks.h	70818	0644	edit dl rm
lsm_hook_defs.h	20455	0644	edit dl rm
lz4.h	27072	0644	edit dl rm
lzo.h	1404	0644	edit dl rm
mailbox_client.h	1837	0644	edit dl rm
mailbox_controller.h	5502	0644	edit dl rm
maple.h	2775	0644	edit dl rm
marvell_phy.h	1691	0644	edit dl rm
math.h	5185	0644	edit dl rm
math64.h	7662	0644	edit dl rm
max17040_battery.h	474	0644	edit dl rm
mbcache.h	2208	0644	edit dl rm
mbus.h	3168	0644	edit dl rm
mc6821.h	1209	0644	edit dl rm
mc146818rtc.h	4567	0644	edit dl rm
mcb.h	3975	0644	edit dl rm
mdev.h	5859	0644	edit dl rm
mdio-bitbang.h	1149	0644	edit dl rm
mdio-gpio.h	177	0644	edit dl rm
mdio-mux.h	1021	0644	edit dl rm
mdio.h	13730	0644	edit dl rm
mei_aux.h	929	0644	edit dl rm
mei_cl_bus.h	4196	0644	edit dl rm
memblock.h	21009	0644	edit dl rm
memcontrol.h	46243	0644	edit dl rm
memfd.h	365	0644	edit dl rm
memory.h	4080	0644	edit dl rm
memory_hotplug.h	10981	0644	edit dl rm
mempolicy.h	8084	0644	edit dl rm
mempool.h	3430	0644	edit dl rm
memregion.h	417	0644	edit dl rm
memremap.h	7818	0644	edit dl rm
memstick.h	9982	0644	edit dl rm
mem_encrypt.h	926	0644	edit dl rm
mhi.h	26908	0644	edit dl rm
mhi_ep.h	9866	0644	edit dl rm
micrel_phy.h	1522	0644	edit dl rm
microchipphy.h	3310	0644	edit dl rm
mic_bus.h	3272	0644	edit dl rm
migrate.h	6278	0644	edit dl rm
migrate_mode.h	758	0644	edit dl rm
mii.h	16283	0644	edit dl rm
mii_timestamper.h	3653	0644	edit dl rm
minmax.h	6373	0644	edit dl rm
min_heap.h	3377	0644	edit dl rm
miscdevice.h	2864	0644	edit dl rm
misc_cgroup.h	3007	0644	edit dl rm
mISDNdsp.h	1217	0644	edit dl rm
mISDNhw.h	5921	0644	edit dl rm
mISDNif.h	15276	0644	edit dl rm
mm-arch-hooks.h	679	0644	edit dl rm
mm.h	101557	0644	edit dl rm
mman.h	3357	0644	edit dl rm
mmap_lock.h	2086	0644	edit dl rm
mmdebug.h	2379	0644	edit dl rm
mmiotrace.h	3122	0644	edit dl rm
mmu_context.h	465	0644	edit dl rm
mmu_notifier.h	28462	0644	edit dl rm
mmzone.h	51615	0644	edit dl rm
mm_inline.h	3059	0644	edit dl rm
mm_types.h	26844	0644	edit dl rm
mm_types_task.h	2457	0644	edit dl rm
mnt_namespace.h	547	0644	edit dl rm
module.h	23659	0644	edit dl rm
moduleloader.h	3170	0644	edit dl rm
moduleparam.h	20275	0644	edit dl rm
module_signature.h	1250	0644	edit dl rm
mod_devicetable.h	22513	0644	edit dl rm
mount.h	3708	0644	edit dl rm
mpage.h	737	0644	edit dl rm
mpi.h	3381	0644	edit dl rm
mpls.h	394	0644	edit dl rm
mpls_iptunnel.h	178	0644	edit dl rm
mroute.h	1998	0644	edit dl rm
mroute6.h	2449	0644	edit dl rm
mroute_base.h	12433	0644	edit dl rm
msdos_fs.h	273	0644	edit dl rm
msdos_partition.h	1655	0644	edit dl rm
msg.h	395	0644	edit dl rm
msi.h	15665	0644	edit dl rm
mutex.h	7837	0644	edit dl rm
mv643xx.h	53657	0644	edit dl rm
mv643xx_eth.h	2001	0644	edit dl rm
mv643xx_i2c.h	545	0644	edit dl rm
mvebu-pmsu.h	520	0644	edit dl rm
mxm-wmi.h	1078	0644	edit dl rm
namei.h	3946	0644	edit dl rm
nd.h	7601	0644	edit dl rm
net.h	12405	0644	edit dl rm
netdevice.h	169526	0644	edit dl rm
netdev_features.h	10519	0644	edit dl rm
netfilter.h	12677	0644	edit dl rm
netfilter_bridge.h	1977	0644	edit dl rm
netfilter_defs.h	486	0644	edit dl rm
netfilter_ingress.h	1472	0644	edit dl rm
netfilter_ipv4.h	1077	0644	edit dl rm
netfilter_ipv6.h	3698	0644	edit dl rm
netlink.h	9170	0644	edit dl rm
netpoll.h	2601	0644	edit dl rm
nfs.h	1145	0644	edit dl rm
nfs3.h	260	0644	edit dl rm
nfs4.h	19527	0644	edit dl rm
nfsacl.h	1435	0644	edit dl rm
nfs_fs.h	18578	0644	edit dl rm
nfs_fs_i.h	308	0644	edit dl rm
nfs_fs_sb.h	10537	0644	edit dl rm
nfs_iostat.h	4285	0644	edit dl rm
nfs_page.h	6991	0644	edit dl rm
nfs_xdr.h	42502	0644	edit dl rm
nitro_enclaves.h	267	0644	edit dl rm
nl802154.h	4336	0644	edit dl rm
nls.h	3162	0644	edit dl rm
nmi.h	6758	0644	edit dl rm
node.h	4399	0644	edit dl rm
nodemask.h	17440	0644	edit dl rm
nospec.h	2187	0644	edit dl rm
notifier.h	8418	0644	edit dl rm
nsc_gpio.h	1459	0644	edit dl rm
nsproxy.h	2676	0644	edit dl rm
ns_common.h	301	0644	edit dl rm
ntb.h	53691	0644	edit dl rm
ntb_transport.h	3892	0644	edit dl rm
nubus.h	5674	0644	edit dl rm
numa.h	1004	0644	edit dl rm
nvme-fc-driver.h	47216	0644	edit dl rm
nvme-fc.h	9955	0644	edit dl rm
nvme-rdma.h	2535	0644	edit dl rm
nvme-tcp.h	4538	0644	edit dl rm
nvme.h	39128	0644	edit dl rm
nvmem-consumer.h	4454	0644	edit dl rm
nvmem-provider.h	3267	0644	edit dl rm
nvram.h	495	0644	edit dl rm
n_r3964.h	4155	0644	edit dl rm
objagg.h	1983	0644	edit dl rm
objtool.h	1155	0644	edit dl rm
of.h	43307	0644	edit dl rm
of_address.h	4603	0644	edit dl rm
of_clk.h	753	0644	edit dl rm
of_device.h	3227	0644	edit dl rm
of_dma.h	2353	0644	edit dl rm
of_fdt.h	4188	0644	edit dl rm
of_gpio.h	4053	0644	edit dl rm
of_graph.h	3636	0644	edit dl rm
of_iommu.h	505	0644	edit dl rm
of_irq.h	3691	0644	edit dl rm
of_mdio.h	3213	0644	edit dl rm
of_net.h	887	0644	edit dl rm
of_pci.h	915	0644	edit dl rm
of_pdt.h	1222	0644	edit dl rm
of_platform.h	3974	0644	edit dl rm
of_reserved_mem.h	2403	0644	edit dl rm
oid_registry.h	3966	0644	edit dl rm
olpc-ec.h	1104	0644	edit dl rm
omap-dma.h	10754	0644	edit dl rm
omap-dmaengine.h	583	0644	edit dl rm
omap-gpmc.h	3011	0644	edit dl rm
omap-iommu.h	685	0644	edit dl rm
omap-mailbox.h	777	0644	edit dl rm
omapfb.h	1246	0644	edit dl rm
once.h	1880	0644	edit dl rm
oom.h	3341	0644	edit dl rm
openvswitch.h	1019	0644	edit dl rm
oprofile.h	6246	0644	edit dl rm
osq_lock.h	1066	0644	edit dl rm
overflow.h	12269	0644	edit dl rm
padata.h	7431	0644	edit dl rm
page-flags-layout.h	3501	0644	edit dl rm
page-flags.h	28156	0644	edit dl rm
page-isolation.h	2124	0644	edit dl rm
pageblock-flags.h	3357	0644	edit dl rm
pagemap.h	24649	0644	edit dl rm
pagevec.h	2383	0644	edit dl rm
pagewalk.h	4167	0644	edit dl rm
page_counter.h	3447	0644	edit dl rm
page_ext.h	1722	0644	edit dl rm
page_idle.h	2683	0644	edit dl rm
page_owner.h	2361	0644	edit dl rm
page_ref.h	5361	0644	edit dl rm
page_reporting.h	834	0644	edit dl rm
parman.h	2934	0644	edit dl rm
parport.h	18273	0644	edit dl rm
parport_pc.h	6713	0644	edit dl rm
parser.h	1141	0644	edit dl rm
pata_arasan_cf_data.h	1250	0644	edit dl rm
patchkey.h	757	0644	edit dl rm
path.h	572	0644	edit dl rm
pch_dma.h	999	0644	edit dl rm
pci-acpi.h	4280	0644	edit dl rm
pci-ats.h	1802	0644	edit dl rm
pci-dma-compat.h	3750	0644	edit dl rm
pci-ecam.h	3358	0644	edit dl rm
pci-ep-cfs.h	957	0644	edit dl rm
pci-epc.h	7336	0644	edit dl rm
pci-epf.h	4868	0644	edit dl rm
pci-p2pdma.h	4049	0644	edit dl rm
pci.h	91798	0644	edit dl rm
pci_hotplug.h	4752	0644	edit dl rm
pci_ids.h	128248	0644	edit dl rm
pda_power.h	1151	0644	edit dl rm
pe.h	16204	0644	edit dl rm
percpu-defs.h	18609	0644	edit dl rm
percpu-refcount.h	11169	0644	edit dl rm
percpu-rwsem.h	4573	0644	edit dl rm
percpu.h	4849	0644	edit dl rm
percpu_counter.h	4372	0644	edit dl rm
perf_event.h	50787	0644	edit dl rm
perf_regs.h	1076	0644	edit dl rm
personality.h	393	0644	edit dl rm
pfn.h	666	0644	edit dl rm
pfn_t.h	3310	0644	edit dl rm
phonet.h	1146	0644	edit dl rm
phy.h	56386	0644	edit dl rm
phylink.h	23707	0644	edit dl rm
phy_fixed.h	1814	0644	edit dl rm
phy_led_triggers.h	1491	0644	edit dl rm
pid.h	6059	0644	edit dl rm
pid_namespace.h	2386	0644	edit dl rm
pim.h	2737	0644	edit dl rm
pipe_fs_i.h	6471	0644	edit dl rm
pkeys.h	961	0644	edit dl rm
pktcdvd.h	6011	0644	edit dl rm
pl320-ipc.h	758	0644	edit dl rm
platform_device.h	14160	0644	edit dl rm
platform_profile.h	1155	0644	edit dl rm
pldmfw.h	4879	0644	edit dl rm
plist.h	8894	0644	edit dl rm
pm-trace.h	940	0644	edit dl rm
pm.h	37480	0644	edit dl rm
pm2301_charger.h	1723	0644	edit dl rm
pmbus.h	1621	0644	edit dl rm
pmu.h	2392	0644	edit dl rm
pm_clock.h	2638	0644	edit dl rm
pm_domain.h	13293	0644	edit dl rm
pm_opp.h	11536	0644	edit dl rm
pm_qos.h	10662	0644	edit dl rm
pm_runtime.h	10329	0644	edit dl rm
pm_wakeirq.h	1518	0644	edit dl rm
pm_wakeup.h	7354	0644	edit dl rm
pnfs_osd_xdr.h	9490	0644	edit dl rm
pnp.h	15765	0644	edit dl rm
poison.h	2651	0644	edit dl rm
poll.h	4109	0644	edit dl rm
posix-clock.h	4660	0644	edit dl rm
posix-timers.h	6460	0644	edit dl rm
posix_acl.h	3167	0644	edit dl rm
posix_acl_xattr.h	1621	0644	edit dl rm
powercap.h	12889	0644	edit dl rm
power_supply.h	15025	0644	edit dl rm
ppp-comp.h	3172	0644	edit dl rm
ppp_channel.h	3146	0644	edit dl rm
ppp_defs.h	812	0644	edit dl rm
pps-gpio.h	1033	0644	edit dl rm
pps_kernel.h	3620	0644	edit dl rm
pr.h	566	0644	edit dl rm
prandom.h	3886	0644	edit dl rm
preempt.h	12232	0644	edit dl rm
prefetch.h	1740	0644	edit dl rm
prime_numbers.h	1384	0644	edit dl rm
printk.h	16908	0644	edit dl rm
prmt.h	143	0644	edit dl rm
processor.h	1889	0644	edit dl rm
proc_fs.h	6138	0644	edit dl rm
proc_ns.h	2897	0644	edit dl rm
profile.h	2743	0644	edit dl rm
projid.h	2269	0644	edit dl rm
property.h	17410	0644	edit dl rm
psci.h	1951	0644	edit dl rm
pseudo_fs.h	355	0644	edit dl rm
psi.h	1782	0644	edit dl rm
psi_types.h	3994	0644	edit dl rm
psp-platform-access.h	1722	0644	edit dl rm
psp-sev.h	18921	0644	edit dl rm
psp-tee.h	2316	0644	edit dl rm
psp.h	697	0644	edit dl rm
pstore.h	7764	0644	edit dl rm
pstore_ram.h	2980	0644	edit dl rm
pti.h	198	0644	edit dl rm
ptp_classify.h	5007	0644	edit dl rm
ptp_clock_kernel.h	12431	0644	edit dl rm
ptrace.h	15210	0644	edit dl rm
ptr_ring.h	16890	0644	edit dl rm
purgatory.h	589	0644	edit dl rm
pvclock_gtod.h	548	0644	edit dl rm
pwm.h	17341	0644	edit dl rm
pwm_backlight.h	802	0644	edit dl rm
pxa2xx_ssp.h	10470	0644	edit dl rm
pxa168_eth.h	728	0644	edit dl rm
qcom-geni-se.h	12471	0644	edit dl rm
qcom_scm.h	4381	0644	edit dl rm
qnx6_fs.h	3349	0644	edit dl rm
quicklist.h	2186	0644	edit dl rm
quota.h	19231	0644	edit dl rm
quotaops.h	10553	0644	edit dl rm
radix-tree.h	17978	0644	edit dl rm
raid_class.h	2149	0644	edit dl rm
ramfs.h	695	0644	edit dl rm
random.h	3855	0644	edit dl rm
range.h	775	0644	edit dl rm
ras.h	1211	0644	edit dl rm
ratelimit.h	1761	0644	edit dl rm
ratelimit_types.h	1170	0644	edit dl rm
rational.h	639	0644	edit dl rm
rbtree.h	9789	0644	edit dl rm
rbtree_augmented.h	10485	0644	edit dl rm
rbtree_latch.h	6815	0644	edit dl rm
rbtree_types.h	946	0644	edit dl rm
rculist.h	28444	0644	edit dl rm
rculist_bl.h	3374	0644	edit dl rm
rculist_nulls.h	5513	0644	edit dl rm
rcupdate.h	38548	0644	edit dl rm
rcupdate_trace.h	2882	0644	edit dl rm
rcupdate_wait.h	1769	0644	edit dl rm
rcutiny.h	4232	0644	edit dl rm
rcutree.h	3077	0644	edit dl rm
rcuwait.h	1900	0644	edit dl rm
rcu_node_tree.h	4468	0644	edit dl rm
rcu_segcblist.h	11292	0644	edit dl rm
rcu_sync.h	2312	0644	edit dl rm
reboot-mode.h	600	0644	edit dl rm
reboot.h	2098	0644	edit dl rm
reciprocal_div.h	3356	0644	edit dl rm
refcount.h	2799	0644	edit dl rm
regmap.h	54447	0644	edit dl rm
regset.h	15527	0644	edit dl rm
relay.h	8908	0644	edit dl rm
remoteproc.h	20078	0644	edit dl rm
resctrl.h	8891	0644	edit dl rm
reservation.h	9226	0644	edit dl rm
reset-controller.h	3067	0644	edit dl rm
reset.h	13739	0644	edit dl rm
resource.h	339	0644	edit dl rm
resource_ext.h	2542	0644	edit dl rm
restart_block.h	1114	0644	edit dl rm
rfkill.h	11040	0644	edit dl rm
rhashtable-types.h	3742	0644	edit dl rm
rhashtable.h	35278	0644	edit dl rm
rh_flags.h	905	0644	edit dl rm
rh_kabi.h	22633	0644	edit dl rm
rh_kabi_attributes.h	501	0644	edit dl rm
rh_kabi_aux.h	917	0644	edit dl rm
rh_kabi_memcg.h	3760	0644	edit dl rm
rh_tasklist_lock.h	959	0644	edit dl rm
rh_waived.h	441	0644	edit dl rm
ring_buffer.h	7371	0644	edit dl rm
rio.h	19687	0644	edit dl rm
rio_drv.h	15061	0644	edit dl rm
rio_ids.h	1317	0644	edit dl rm
rio_regs.h	19737	0644	edit dl rm
rmap.h	11037	0644	edit dl rm
rmi.h	12479	0644	edit dl rm
rndis.h	17269	0644	edit dl rm
rodata_test.h	559	0644	edit dl rm
root_dev.h	619	0644	edit dl rm
rpmsg.h	7117	0644	edit dl rm
rslib.h	3754	0644	edit dl rm
rtc.h	9427	0644	edit dl rm
rtmutex.h	3147	0644	edit dl rm
rtnetlink.h	4604	0644	edit dl rm
rtsx_common.h	1475	0644	edit dl rm
rtsx_pci.h	41135	0644	edit dl rm
rtsx_usb.h	16334	0644	edit dl rm
rwbase_rt.h	876	0644	edit dl rm
rwlock.h	4054	0644	edit dl rm
rwlock_api_smp.h	7736	0644	edit dl rm
rwlock_rt.h	3053	0644	edit dl rm
rwlock_types.h	1814	0644	edit dl rm
rwsem.h	7405	0644	edit dl rm
s3c_adc_battery.h	971	0644	edit dl rm
sa11x0-dma.h	572	0644	edit dl rm
sbitmap.h	20203	0644	edit dl rm
scatterlist.h	18003	0644	edit dl rm
scc.h	2905	0644	edit dl rm
sched.h	64576	0644	edit dl rm
sched_clock.h	1617	0644	edit dl rm
scif.h	60280	0644	edit dl rm
scmi_protocol.h	9284	0644	edit dl rm
scpi_protocol.h	2642	0644	edit dl rm
screen_info.h	191	0644	edit dl rm
scs.h	1828	0644	edit dl rm
sctp.h	24124	0644	edit dl rm
scx200.h	1863	0644	edit dl rm
scx200_gpio.h	2438	0644	edit dl rm
sdb.h	4270	0644	edit dl rm
sdla.h	7066	0644	edit dl rm
seccomp.h	2972	0644	edit dl rm
securebits.h	239	0644	edit dl rm
security.h	52185	0644	edit dl rm
sed-opal.h	1985	0644	edit dl rm
seg6.h	121	0644	edit dl rm
seg6_genl.h	136	0644	edit dl rm
seg6_hmac.h	136	0644	edit dl rm
seg6_iptunnel.h	148	0644	edit dl rm
seg6_local.h	100	0644	edit dl rm
selection.h	1595	0644	edit dl rm
sem.h	599	0644	edit dl rm
semaphore.h	1400	0644	edit dl rm
seqlock.h	39244	0644	edit dl rm
seqno-fence.h	4050	0644	edit dl rm
seq_buf.h	3405	0644	edit dl rm
seq_file.h	8291	0644	edit dl rm
seq_file_net.h	730	0644	edit dl rm
serdev.h	10101	0644	edit dl rm
serial.h	630	0644	edit dl rm
serial_8250.h	6581	0644	edit dl rm
serial_bcm63xx.h	4843	0644	edit dl rm
serial_core.h	18058	0644	edit dl rm
serial_max3100.h	1423	0644	edit dl rm
serial_pnx8xxx.h	2670	0644	edit dl rm
serial_s3c.h	8784	0644	edit dl rm
serial_sci.h	1611	0644	edit dl rm
serio.h	4528	0644	edit dl rm
set_memory.h	1497	0644	edit dl rm
sfi.h	5890	0644	edit dl rm
sfi_acpi.h	3472	0644	edit dl rm
sfp.h	16216	0644	edit dl rm
shdma-base.h	4520	0644	edit dl rm
shm.h	968	0644	edit dl rm
shmem_fs.h	5779	0644	edit dl rm
shrinker.h	3365	0644	edit dl rm
sh_clk.h	6098	0644	edit dl rm
sh_dma.h	3696	0644	edit dl rm
sh_eth.h	369	0644	edit dl rm
sh_intc.h	3506	0644	edit dl rm
sh_timer.h	172	0644	edit dl rm
signal.h	13513	0644	edit dl rm
signalfd.h	817	0644	edit dl rm
signal_types.h	1241	0644	edit dl rm
siox.h	2075	0644	edit dl rm
siphash.h	4738	0644	edit dl rm
sirfsoc_dma.h	162	0644	edit dl rm
sizes.h	1451	0644	edit dl rm
skbuff.h	138822	0644	edit dl rm
skb_array.h	5512	0644	edit dl rm
skmsg.h	13557	0644	edit dl rm
slab.h	25099	0644	edit dl rm
slab_def.h	3009	0644	edit dl rm
slimbus.h	5410	0644	edit dl rm
slub_def.h	6588	0644	edit dl rm
sm501-regs.h	12046	0644	edit dl rm
sm501.h	4743	0644	edit dl rm
smc91x.h	1604	0644	edit dl rm
smc911x.h	294	0644	edit dl rm
smp.h	7085	0644	edit dl rm
smpboot.h	2215	0644	edit dl rm
smp_types.h	1340	0644	edit dl rm
smsc911x.h	2340	0644	edit dl rm
smscphy.h	1283	0644	edit dl rm
socket.h	14427	0644	edit dl rm
sockptr.h	2279	0644	edit dl rm
sock_diag.h	2370	0644	edit dl rm
sonet.h	469	0644	edit dl rm
sony-laptop.h	1441	0644	edit dl rm
sonypi.h	2410	0644	edit dl rm
sort.h	247	0644	edit dl rm
sound.h	685	0644	edit dl rm
soundcard.h	1631	0644	edit dl rm
spinlock.h	15933	0644	edit dl rm
spinlock_api_smp.h	5346	0644	edit dl rm
spinlock_api_up.h	3394	0644	edit dl rm
spinlock_rt.h	4209	0644	edit dl rm
spinlock_types.h	1826	0644	edit dl rm
spinlock_types_raw.h	1726	0644	edit dl rm
spinlock_types_up.h	726	0644	edit dl rm
spinlock_up.h	2126	0644	edit dl rm
splice.h	2981	0644	edit dl rm
spmi.h	6094	0644	edit dl rm
sram.h	844	0644	edit dl rm
srcu.h	7858	0644	edit dl rm
srcutiny.h	3411	0644	edit dl rm
srcutree.h	5437	0644	edit dl rm
ssbi.h	1140	0644	edit dl rm
stackdepot.h	1309	0644	edit dl rm
stackprotector.h	361	0644	edit dl rm
stacktrace.h	4301	0644	edit dl rm
start_kernel.h	334	0644	edit dl rm
stat.h	1212	0644	edit dl rm
statfs.h	1346	0644	edit dl rm
static_call.h	7034	0644	edit dl rm
static_call_types.h	535	0644	edit dl rm
static_key.h	30	0644	edit dl rm
stddef.h	3275	0644	edit dl rm
stm.h	4453	0644	edit dl rm
stmmac.h	7607	0644	edit dl rm
stmp3xxx_rtc_wdt.h	332	0644	edit dl rm
stmp_device.h	619	0644	edit dl rm
stop_machine.h	4842	0644	edit dl rm
string.h	9939	0644	edit dl rm
stringhash.h	2715	0644	edit dl rm
stringify.h	341	0644	edit dl rm
string_helpers.h	3082	0644	edit dl rm
sudmac.h	1269	0644	edit dl rm
sungem_phy.h	4031	0644	edit dl rm
sunserialcore.h	1102	0644	edit dl rm
sunxi-rsb.h	2955	0644	edit dl rm
superhyway.h	2878	0644	edit dl rm
suspend.h	21483	0644	edit dl rm
svga.h	3837	0644	edit dl rm
sw842.h	328	0644	edit dl rm
swab.h	569	0644	edit dl rm
swait.h	10284	0644	edit dl rm
swap.h	23109	0644	edit dl rm
swapfile.h	556	0644	edit dl rm
swapops.h	8895	0644	edit dl rm
swap_cgroup.h	971	0644	edit dl rm
swap_slots.h	841	0644	edit dl rm
swiotlb.h	5472	0644	edit dl rm
switchtec.h	11530	0644	edit dl rm
sxgbe_platform.h	1371	0644	edit dl rm
synclink.h	989	0644	edit dl rm
sync_core.h	581	0644	edit dl rm
sync_file.h	1606	0644	edit dl rm
sys.h	960	0644	edit dl rm
syscalls.h	51913	0644	edit dl rm
syscore_ops.h	635	0644	edit dl rm
sysctl.h	7770	0644	edit dl rm
sysfs.h	18090	0644	edit dl rm
syslog.h	1931	0644	edit dl rm
sysrq.h	1896	0644	edit dl rm
sysv_fs.h	9250	0644	edit dl rm
sys_soc.h	1263	0644	edit dl rm
t10-pi.h	1538	0644	edit dl rm
taskstats_kern.h	957	0644	edit dl rm
task_io_accounting.h	1159	0644	edit dl rm
task_io_accounting_ops.h	2610	0644	edit dl rm
task_work.h	718	0644	edit dl rm
tboot.h	4089	0644	edit dl rm
tc.h	3489	0644	edit dl rm
tca6416_keypad.h	847	0644	edit dl rm
tcp.h	18092	0644	edit dl rm
tee_drv.h	16685	0644	edit dl rm
textsearch.h	4842	0644	edit dl rm
textsearch_fsm.h	1214	0644	edit dl rm
tfrc.h	1933	0644	edit dl rm
thermal.h	19928	0644	edit dl rm
thinkpad_acpi.h	320	0644	edit dl rm
threads.h	1309	0644	edit dl rm
thread_info.h	4869	0644	edit dl rm
thunderbolt.h	21435	0644	edit dl rm
ti-emif-sram.h	5150	0644	edit dl rm
tick.h	9612	0644	edit dl rm
tifm.h	4920	0644	edit dl rm
timb_dma.h	1784	0644	edit dl rm
timb_gpio.h	1308	0644	edit dl rm
time.h	3916	0644	edit dl rm
time32.h	6068	0644	edit dl rm
time64.h	4055	0644	edit dl rm
timecounter.h	4693	0644	edit dl rm
timekeeper_internal.h	5455	0644	edit dl rm
timekeeping.h	7381	0644	edit dl rm
timekeeping32.h	2055	0644	edit dl rm
timer.h	7092	0644	edit dl rm
timerfd.h	508	0644	edit dl rm
timeriomem-rng.h	475	0644	edit dl rm
timerqueue.h	1498	0644	edit dl rm
timex.h	6466	0644	edit dl rm
time_namespace.h	3217	0644	edit dl rm
ti_wilink_st.h	14404	0644	edit dl rm
tnum.h	3467	0644	edit dl rm
topology.h	6284	0644	edit dl rm
torture.h	4953	0644	edit dl rm
toshiba.h	904	0644	edit dl rm
tpm.h	11345	0644	edit dl rm
tpm_command.h	847	0644	edit dl rm
tpm_eventlog.h	6686	0644	edit dl rm
trace.h	1311	0644	edit dl rm
tracefs.h	1221	0644	edit dl rm
tracehook.h	7233	0644	edit dl rm
tracepoint-defs.h	905	0644	edit dl rm
tracepoint.h	18003	0644	edit dl rm
trace_clock.h	667	0644	edit dl rm
trace_events.h	21035	0644	edit dl rm
trace_seq.h	4185	0644	edit dl rm
transport_class.h	2570	0644	edit dl rm
ts-nbus.h	532	0644	edit dl rm
tsacct_kern.h	1230	0644	edit dl rm
tty.h	28822	0644	edit dl rm
tty_driver.h	16017	0644	edit dl rm
tty_flip.h	1545	0644	edit dl rm
tty_ldisc.h	7937	0644	edit dl rm
typecheck.h	782	0644	edit dl rm
types.h	5660	0644	edit dl rm
u64_stats_sync.h	5957	0644	edit dl rm
uaccess.h	13715	0644	edit dl rm
ucb1400.h	4367	0644	edit dl rm
ucs2_string.h	662	0644	edit dl rm
udp.h	5552	0644	edit dl rm
uidgid.h	4171	0644	edit dl rm
uio.h	9756	0644	edit dl rm
uio_driver.h	4191	0644	edit dl rm
umh.h	1837	0644	edit dl rm
units.h	2685	0644	edit dl rm
uprobes.h	6783	0644	edit dl rm
usb.h	81721	0644	edit dl rm
usbdevice_fs.h	2234	0644	edit dl rm
usb_usual.h	3671	0644	edit dl rm
user-return-notifier.h	1205	0644	edit dl rm
user.h	22	0644	edit dl rm
userfaultfd_k.h	4651	0644	edit dl rm
usermode_driver.h	515	0644	edit dl rm
user_namespace.h	5084	0644	edit dl rm
util_macros.h	1197	0644	edit dl rm
uts.h	388	0644	edit dl rm
utsname.h	1828	0644	edit dl rm
uuid.h	2833	0644	edit dl rm
uwb.h	25827	0644	edit dl rm
vbox_utils.h	1675	0644	edit dl rm
vdpa.h	15756	0644	edit dl rm
verification.h	1996	0644	edit dl rm
vermagic.h	1159	0644	edit dl rm
vexpress.h	1477	0644	edit dl rm
vfio.h	7332	0644	edit dl rm
vfs.h	116	0644	edit dl rm
vgaarb.h	3972	0644	edit dl rm
vga_switcheroo.h	8828	0644	edit dl rm
vhost_iotlb.h	1369	0644	edit dl rm
via-core.h	7442	0644	edit dl rm
via-gpio.h	334	0644	edit dl rm
via.h	932	0644	edit dl rm
via_i2c.h	1516	0644	edit dl rm
videodev2.h	2769	0644	edit dl rm
virtio.h	6915	0644	edit dl rm
virtio_byteorder.h	1491	0644	edit dl rm
virtio_caif.h	492	0644	edit dl rm
virtio_config.h	15517	0644	edit dl rm
virtio_console.h	1974	0644	edit dl rm
virtio_dma_buf.h	1147	0644	edit dl rm
virtio_net.h	4964	0644	edit dl rm
virtio_pci_modern.h	3379	0644	edit dl rm
virtio_ring.h	3035	0644	edit dl rm
virtio_vsock.h	4603	0644	edit dl rm
visorbus.h	12525	0644	edit dl rm
vlynq.h	3969	0644	edit dl rm
vmacache.h	722	0644	edit dl rm
vmalloc.h	8367	0644	edit dl rm
vme.h	5794	0644	edit dl rm
vmpressure.h	1736	0644	edit dl rm
vmstat.h	14739	0644	edit dl rm
vmw_vmci_api.h	2954	0644	edit dl rm
vmw_vmci_defs.h	30928	0644	edit dl rm
vm_event_item.h	3385	0644	edit dl rm
vringh.h	9486	0644	edit dl rm
vt.h	611	0644	edit dl rm
vtime.h	4174	0644	edit dl rm
vt_buffer.h	1524	0644	edit dl rm
vt_kern.h	6179	0644	edit dl rm
w1-gpio.h	639	0644	edit dl rm
w1.h	9345	0644	edit dl rm
wait.h	43292	0644	edit dl rm
wait_bit.h	11500	0644	edit dl rm
wanrouter.h	210	0644	edit dl rm
watchdog.h	8002	0644	edit dl rm
win_minmax.h	832	0644	edit dl rm
wireless.h	1607	0644	edit dl rm
wkup_m3_ipc.h	1565	0644	edit dl rm
wl12xx.h	1422	0644	edit dl rm
wm97xx.h	10860	0644	edit dl rm
wmi.h	1989	0644	edit dl rm
workqueue.h	21856	0644	edit dl rm
writeback.h	13374	0644	edit dl rm
ww_mutex.h	13037	0644	edit dl rm
xarray.h	59101	0644	edit dl rm
xattr.h	3572	0644	edit dl rm
xxhash.h	7829	0644	edit dl rm
xz.h	11431	0644	edit dl rm
yam.h	2888	0644	edit dl rm
z2_battery.h	318	0644	edit dl rm
zbud.h	740	0644	edit dl rm
zconf.h	1770	0644	edit dl rm
zlib.h	28784	0644	edit dl rm
zorro.h	4030	0644	edit dl rm
zpool.h	3102	0644	edit dl rm
zsmalloc.h	1730	0644	edit dl rm
zstd.h	49806	0644	edit dl rm
zutil.h	2793	0644	edit dl rm

Edit: /usr/src/kernels/4.18.0-553.157.1.el8_10.x86_64/include/linux/lsm_hooks.h (70818B)

/*
 * Linux Security Module interfaces
 *
 * Copyright (C) 2001 WireX Communications, Inc <chris@wirex.com>
 * Copyright (C) 2001 Greg Kroah-Hartman <greg@kroah.com>
 * Copyright (C) 2001 Networks Associates Technology, Inc <ssmalley@nai.com>
 * Copyright (C) 2001 James Morris <jmorris@intercode.com.au>
 * Copyright (C) 2001 Silicon Graphics, Inc. (Trust Technology Group)
 * Copyright (C) 2015 Intel Corporation.
 * Copyright (C) 2015 Casey Schaufler <casey@schaufler-ca.com>
 * Copyright (C) 2016 Mellanox Techonologies
 *
 *	This program is free software; you can redistribute it and/or modify
 *	it under the terms of the GNU General Public License as published by
 *	the Free Software Foundation; either version 2 of the License, or
 *	(at your option) any later version.
 *
 *	Due to this file being licensed under the GPL there is controversy over
 *	whether this permits you to write a module that #includes this file
 *	without placing your module under the GPL.  Please consult a lawyer for
 *	advice before doing this.
 *
 */

#ifndef __LINUX_LSM_HOOKS_H
#define __LINUX_LSM_HOOKS_H

#include <linux/security.h>
#include <linux/init.h>
#include <linux/rculist.h>

/**
 * union security_list_options - Linux Security Module hook function list
 *
 * Security hooks for program execution operations.
 *
 * @bprm_creds_for_exec:
 *	If the setup in prepare_exec_creds did not setup @bprm->cred->security
 *	properly for executing @bprm->file, update the LSM's portion of
 *	@bprm->cred->security to be what commit_creds needs to install for the
 *	new program.  This hook may also optionally check permissions
 *	(e.g. for transitions between security domains).
 *	The hook must set @bprm->secureexec to 1 if AT_SECURE should be set to
 *	request libc enable secure mode.
 *	@bprm contains the linux_binprm structure.
 *	Return 0 if the hook is successful and permission is granted.
 * @bprm_repopulate_creds:
 *	Assuming that the relevant bits of @bprm->cred->security have been
 *	previously set, examine @bprm->file and regenerate them.  This is
 *	so that the credentials derived from the interpreter the code is
 *	actually going to run are used rather than credentials derived
 *	from a script.  This done because the interpreter binary needs to
 *	reopen script, and may end up opening something completely different.
 *	This hook may also optionally check permissions (e.g. for
 *	transitions between security domains).
 *	The hook must set @bprm->active_secureexec to 1 if AT_SECURE should be set to
 *	request libc enable secure mode.
 *	@bprm contains the linux_binprm structure.
 *	Return 0 if the hook is successful and permission is granted.
 * @bprm_check_security:
 *	This hook mediates the point when a search for a binary handler will
 *	begin.  It allows a check against the @bprm->cred->security value
 *	which was set in the preceding creds_for_exec call.  The argv list and
 *	envp list are reliably available in @bprm.  This hook may be called
 *	multiple times during a single execve.
 *	@bprm contains the linux_binprm structure.
 *	Return 0 if the hook is successful and permission is granted.
 * @bprm_committing_creds:
 *	Prepare to install the new security attributes of a process being
 *	transformed by an execve operation, based on the old credentials
 *	pointed to by @current->cred and the information set in @bprm->cred by
 *	the bprm_creds_for_exec hook.  @bprm points to the linux_binprm
 *	structure.  This hook is a good place to perform state changes on the
 *	process such as closing open file descriptors to which access will no
 *	longer be granted when the attributes are changed.  This is called
 *	immediately before commit_creds().
 * @bprm_committed_creds:
 *	Tidy up after the installation of the new security attributes of a
 *	process being transformed by an execve operation.  The new credentials
 *	have, by this point, been set to @current->cred.  @bprm points to the
 *	linux_binprm structure.  This hook is a good place to perform state
 *	changes on the process such as clearing out non-inheritable signal
 *	state.  This is called immediately after commit_creds().
 *
 * Security hooks for mount using fs_context.
 *	[See also Documentation/filesystems/mount_api.txt]
 *
 * @fs_context_dup:
 *	Allocate and attach a security structure to sc->security.  This pointer
 *	is initialised to NULL by the caller.
 *	@fc indicates the new filesystem context.
 *	@src_fc indicates the original filesystem context.
 * @fs_context_parse_param:
 *	Userspace provided a parameter to configure a superblock.  The LSM may
 *	reject it with an error and may use it for itself, in which case it
 *	should return 0; otherwise it should return -ENOPARAM to pass it on to
 *	the filesystem.
 *	@fc indicates the filesystem context.
 *	@param The parameter
 *
 * Security hooks for filesystem operations.
 *
 * @sb_alloc_security:
 *	Allocate and attach a security structure to the sb->s_security field.
 *	The s_security field is initialized to NULL when the structure is
 *	allocated.
 *	@sb contains the super_block structure to be modified.
 *	Return 0 if operation was successful.
 * @sb_free_security:
 *	Deallocate and clear the sb->s_security field.
 *	@sb contains the super_block structure to be modified.
 * @sb_statfs:
 *	Check permission before obtaining filesystem statistics for the @mnt
 *	mountpoint.
 *	@dentry is a handle on the superblock for the filesystem.
 *	Return 0 if permission is granted.
 * @sb_mount:
 *	Check permission before an object specified by @dev_name is mounted on
 *	the mount point named by @nd.  For an ordinary mount, @dev_name
 *	identifies a device if the file system type requires a device.  For a
 *	remount (@flags & MS_REMOUNT), @dev_name is irrelevant.  For a
 *	loopback/bind mount (@flags & MS_BIND), @dev_name identifies the
 *	pathname of the object being mounted.
 *	@dev_name contains the name for object being mounted.
 *	@path contains the path for mount point object.
 *	@type contains the filesystem type.
 *	@flags contains the mount flags.
 *	@data contains the filesystem-specific data.
 *	Return 0 if permission is granted.
 * @sb_copy_data:
 *	Allow mount option data to be copied prior to parsing by the filesystem,
 *	so that the security module can extract security-specific mount
 *	options cleanly (a filesystem may modify the data e.g. with strsep()).
 *	This also allows the original mount data to be stripped of security-
 *	specific options to avoid having to make filesystems aware of them.
 *	@type the type of filesystem being mounted.
 *	@orig the original mount data copied from userspace.
 *	@copy copied data which will be passed to the security module.
 *	Returns 0 if the copy was successful.
 * @sb_mnt_opts_compat:
 *	Determine if the new mount options in @mnt_opts are allowed given
 *	the existing mounted filesystem at @sb.
 *	@sb superblock being compared
 *	@mnt_opts new mount options
 *	Return 0 if options are compatible.
 * @sb_remount:
 *	Extracts security system specific mount options and verifies no changes
 *	are being made to those options.
 *	@sb superblock being remounted
 *	@data contains the filesystem-specific data.
 *	Return 0 if permission is granted.
 * @sb_umount:
 *	Check permission before the @mnt file system is unmounted.
 *	@mnt contains the mounted file system.
 *	@flags contains the unmount flags, e.g. MNT_FORCE.
 *	Return 0 if permission is granted.
 * @sb_pivotroot:
 *	Check permission before pivoting the root filesystem.
 *	@old_path contains the path for the new location of the
 *	current root (put_old).
 *	@new_path contains the path for the new root (new_root).
 *	Return 0 if permission is granted.
 * @sb_set_mnt_opts:
 *	Set the security relevant mount options used for a superblock
 *	@sb the superblock to set security mount options for
 *	@opts binary data structure containing all lsm mount data
 * @sb_clone_mnt_opts:
 *	Copy all security options from a given superblock to another
 *	@oldsb old superblock which contain information to clone
 *	@newsb new superblock which needs filled in
 * @sb_parse_opts_str:
 *	Parse a string of security data filling in the opts structure
 *	@options string containing all mount options known by the LSM
 *	@opts binary data structure usable by the LSM
 * @move_mount:
 *	Check permission before a mount is moved.
 *	@from_path indicates the mount that is going to be moved.
 *	@to_path indicates the mountpoint that will be mounted upon.
 * @dentry_init_security:
 *	Compute a context for a dentry as the inode is not yet available
 *	since NFSv4 has no label backed by an EA anyway.
 *	@dentry dentry to use in calculating the context.
 *	@mode mode used to determine resource type.
 *	@name name of the last path component used to create file
 *	@ctx pointer to place the pointer to the resulting context in.
 *	@ctxlen point to place the length of the resulting context.
 * @dentry_create_files_as:
 *	Compute a context for a dentry as the inode is not yet available
 *	and set that context in passed in creds so that new files are
 *	created using that context. Context is calculated using the
 *	passed in creds and not the creds of the caller.
 *	@dentry dentry to use in calculating the context.
 *	@mode mode used to determine resource type.
 *	@name name of the last path component used to create file
 *	@old creds which should be used for context calculation
 *	@new creds to modify
 *
 *
 * Security hooks for inode operations.
 *
 * @inode_alloc_security:
 *	Allocate and attach a security structure to @inode->i_security.  The
 *	i_security field is initialized to NULL when the inode structure is
 *	allocated.
 *	@inode contains the inode structure.
 *	Return 0 if operation was successful.
 * @inode_free_security:
 *	@inode contains the inode structure.
 *	Deallocate the inode security structure and set @inode->i_security to
 *	NULL.
 * @inode_init_security:
 *	Obtain the security attribute name suffix and value to set on a newly
 *	created inode and set up the incore security field for the new inode.
 *	This hook is called by the fs code as part of the inode creation
 *	transaction and provides for atomic labeling of the inode, unlike
 *	the post_create/mkdir/... hooks called by the VFS.  The hook function
 *	is expected to allocate the name and value via kmalloc, with the caller
 *	being responsible for calling kfree after using them.
 *	If the security module does not use security attributes or does
 *	not wish to put a security attribute on this particular inode,
 *	then it should return -EOPNOTSUPP to skip this processing.
 *	@inode contains the inode structure of the newly created inode.
 *	@dir contains the inode structure of the parent directory.
 *	@qstr contains the last path component of the new object
 *	@name will be set to the allocated name suffix (e.g. selinux).
 *	@value will be set to the allocated attribute value.
 *	@len will be set to the length of the value.
 *	Returns 0 if @name and @value have been successfully set,
 *	-EOPNOTSUPP if no security attribute is needed, or
 *	-ENOMEM on memory allocation failure.
 * @inode_create:
 *	Check permission to create a regular file.
 *	@dir contains inode structure of the parent of the new file.
 *	@dentry contains the dentry structure for the file to be created.
 *	@mode contains the file mode of the file to be created.
 *	Return 0 if permission is granted.
 * @inode_link:
 *	Check permission before creating a new hard link to a file.
 *	@old_dentry contains the dentry structure for an existing
 *	link to the file.
 *	@dir contains the inode structure of the parent directory
 *	of the new link.
 *	@new_dentry contains the dentry structure for the new link.
 *	Return 0 if permission is granted.
 * @path_link:
 *	Check permission before creating a new hard link to a file.
 *	@old_dentry contains the dentry structure for an existing link
 *	to the file.
 *	@new_dir contains the path structure of the parent directory of
 *	the new link.
 *	@new_dentry contains the dentry structure for the new link.
 *	Return 0 if permission is granted.
 * @inode_unlink:
 *	Check the permission to remove a hard link to a file.
 *	@dir contains the inode structure of parent directory of the file.
 *	@dentry contains the dentry structure for file to be unlinked.
 *	Return 0 if permission is granted.
 * @path_unlink:
 *	Check the permission to remove a hard link to a file.
 *	@dir contains the path structure of parent directory of the file.
 *	@dentry contains the dentry structure for file to be unlinked.
 *	Return 0 if permission is granted.
 * @inode_symlink:
 *	Check the permission to create a symbolic link to a file.
 *	@dir contains the inode structure of parent directory of
 *	the symbolic link.
 *	@dentry contains the dentry structure of the symbolic link.
 *	@old_name contains the pathname of file.
 *	Return 0 if permission is granted.
 * @path_symlink:
 *	Check the permission to create a symbolic link to a file.
 *	@dir contains the path structure of parent directory of
 *	the symbolic link.
 *	@dentry contains the dentry structure of the symbolic link.
 *	@old_name contains the pathname of file.
 *	Return 0 if permission is granted.
 * @inode_mkdir:
 *	Check permissions to create a new directory in the existing directory
 *	associated with inode structure @dir.
 *	@dir contains the inode structure of parent of the directory
 *	to be created.
 *	@dentry contains the dentry structure of new directory.
 *	@mode contains the mode of new directory.
 *	Return 0 if permission is granted.
 * @path_mkdir:
 *	Check permissions to create a new directory in the existing directory
 *	associated with path structure @path.
 *	@dir contains the path structure of parent of the directory
 *	to be created.
 *	@dentry contains the dentry structure of new directory.
 *	@mode contains the mode of new directory.
 *	Return 0 if permission is granted.
 * @inode_rmdir:
 *	Check the permission to remove a directory.
 *	@dir contains the inode structure of parent of the directory
 *	to be removed.
 *	@dentry contains the dentry structure of directory to be removed.
 *	Return 0 if permission is granted.
 * @path_rmdir:
 *	Check the permission to remove a directory.
 *	@dir contains the path structure of parent of the directory to be
 *	removed.
 *	@dentry contains the dentry structure of directory to be removed.
 *	Return 0 if permission is granted.
 * @inode_mknod:
 *	Check permissions when creating a special file (or a socket or a fifo
 *	file created via the mknod system call).  Note that if mknod operation
 *	is being done for a regular file, then the create hook will be called
 *	and not this hook.
 *	@dir contains the inode structure of parent of the new file.
 *	@dentry contains the dentry structure of the new file.
 *	@mode contains the mode of the new file.
 *	@dev contains the device number.
 *	Return 0 if permission is granted.
 * @path_mknod:
 *	Check permissions when creating a file. Note that this hook is called
 *	even if mknod operation is being done for a regular file.
 *	@dir contains the path structure of parent of the new file.
 *	@dentry contains the dentry structure of the new file.
 *	@mode contains the mode of the new file.
 *	@dev contains the undecoded device number. Use new_decode_dev() to get
 *	the decoded device number.
 *	Return 0 if permission is granted.
 * @inode_rename:
 *	Check for permission to rename a file or directory.
 *	@old_dir contains the inode structure for parent of the old link.
 *	@old_dentry contains the dentry structure of the old link.
 *	@new_dir contains the inode structure for parent of the new link.
 *	@new_dentry contains the dentry structure of the new link.
 *	Return 0 if permission is granted.
 * @path_rename:
 *	Check for permission to rename a file or directory.
 *	@old_dir contains the path structure for parent of the old link.
 *	@old_dentry contains the dentry structure of the old link.
 *	@new_dir contains the path structure for parent of the new link.
 *	@new_dentry contains the dentry structure of the new link.
 *	Return 0 if permission is granted.
 * @path_chmod:
 *	Check for permission to change DAC's permission of a file or directory.
 *	@dentry contains the dentry structure.
 *	@mnt contains the vfsmnt structure.
 *	@mode contains DAC's mode.
 *	Return 0 if permission is granted.
 * @path_chown:
 *	Check for permission to change owner/group of a file or directory.
 *	@path contains the path structure.
 *	@uid contains new owner's ID.
 *	@gid contains new group's ID.
 *	Return 0 if permission is granted.
 * @path_chroot:
 *	Check for permission to change root directory.
 *	@path contains the path structure.
 *	Return 0 if permission is granted.
 * @inode_readlink:
 *	Check the permission to read the symbolic link.
 *	@dentry contains the dentry structure for the file link.
 *	Return 0 if permission is granted.
 * @inode_follow_link:
 *	Check permission to follow a symbolic link when looking up a pathname.
 *	@dentry contains the dentry structure for the link.
 *	@inode contains the inode, which itself is not stable in RCU-walk
 *	@rcu indicates whether we are in RCU-walk mode.
 *	Return 0 if permission is granted.
 * @inode_permission:
 *	Check permission before accessing an inode.  This hook is called by the
 *	existing Linux permission function, so a security module can use it to
 *	provide additional checking for existing Linux permission checks.
 *	Notice that this hook is called when a file is opened (as well as many
 *	other operations), whereas the file_security_ops permission hook is
 *	called when the actual read/write operations are performed.
 *	@inode contains the inode structure to check.
 *	@mask contains the permission mask.
 *	Return 0 if permission is granted.
 * @inode_setattr:
 *	Check permission before setting file attributes.  Note that the kernel
 *	call to notify_change is performed from several locations, whenever
 *	file attributes change (such as when a file is truncated, chown/chmod
 *	operations, transferring disk quotas, etc).
 *	@dentry contains the dentry structure for the file.
 *	@attr is the iattr structure containing the new file attributes.
 *	Return 0 if permission is granted.
 * @path_truncate:
 *	Check permission before truncating a file.
 *	@path contains the path structure for the file.
 *	Return 0 if permission is granted.
 * @inode_getattr:
 *	Check permission before obtaining file attributes.
 *	@path contains the path structure for the file.
 *	Return 0 if permission is granted.
 * @inode_setxattr:
 *	Check permission before setting the extended attributes
 *	@value identified by @name for @dentry.
 *	Return 0 if permission is granted.
 * @inode_post_setxattr:
 *	Update inode security field after successful setxattr operation.
 *	@value identified by @name for @dentry.
 * @inode_getxattr:
 *	Check permission before obtaining the extended attributes
 *	identified by @name for @dentry.
 *	Return 0 if permission is granted.
 * @inode_listxattr:
 *	Check permission before obtaining the list of extended attribute
 *	names for @dentry.
 *	Return 0 if permission is granted.
 * @inode_removexattr:
 *	Check permission before removing the extended attribute
 *	identified by @name for @dentry.
 *	Return 0 if permission is granted.
 * @inode_getsecurity:
 *	Retrieve a copy of the extended attribute representation of the
 *	security label associated with @name for @inode via @buffer.  Note that
 *	@name is the remainder of the attribute name after the security prefix
 *	has been removed. @alloc is used to specify of the call should return a
 *	value via the buffer or just the value length Return size of buffer on
 *	success.
 * @inode_setsecurity:
 *	Set the security label associated with @name for @inode from the
 *	extended attribute value @value.  @size indicates the size of the
 *	@value in bytes.  @flags may be XATTR_CREATE, XATTR_REPLACE, or 0.
 *	Note that @name is the remainder of the attribute name after the
 *	security. prefix has been removed.
 *	Return 0 on success.
 * @inode_listsecurity:
 *	Copy the extended attribute names for the security labels
 *	associated with @inode into @buffer.  The maximum size of @buffer
 *	is specified by @buffer_size.  @buffer may be NULL to request
 *	the size of the buffer required.
 *	Returns number of bytes used/required on success.
 * @inode_need_killpriv:
 *	Called when an inode has been changed.
 *	@dentry is the dentry being changed.
 *	Return <0 on error to abort the inode change operation.
 *	Return 0 if inode_killpriv does not need to be called.
 *	Return >0 if inode_killpriv does need to be called.
 * @inode_killpriv:
 *	The setuid bit is being removed.  Remove similar security labels.
 *	Called with the dentry->d_inode->i_mutex held.
 *	@dentry is the dentry being changed.
 *	Return 0 on success.  If error is returned, then the operation
 *	causing setuid bit removal is failed.
 * @inode_getsecid:
 *	Get the secid associated with the node.
 *	@inode contains a pointer to the inode.
 *	@secid contains a pointer to the location where result will be saved.
 *	In case of failure, @secid will be set to zero.
 * @inode_copy_up:
 *	A file is about to be copied up from lower layer to upper layer of
 *	overlay filesystem. Security module can prepare a set of new creds
 *	and modify as need be and return new creds. Caller will switch to
 *	new creds temporarily to create new file and release newly allocated
 *	creds.
 *	@src indicates the union dentry of file that is being copied up.
 *	@new pointer to pointer to return newly allocated creds.
 *	Returns 0 on success or a negative error code on error.
 * @inode_copy_up_xattr:
 *	Filter the xattrs being copied up when a unioned file is copied
 *	up from a lower layer to the union/overlay layer.
 *	@name indicates the name of the xattr.
 *	Returns 0 to accept the xattr, 1 to discard the xattr, -EOPNOTSUPP if
 *	security module does not know about attribute or a negative error code
 *	to abort the copy up. Note that the caller is responsible for reading
 *	and writing the xattrs as this hook is merely a filter.
 *
 * Security hooks for kernfs node operations
 *
 * @kernfs_init_security:
 *	Initialize the security context of a newly created kernfs node based
 *	on its own and its parent's attributes.
 *
 *	@kn_dir the parent kernfs node
 *	@kn the new child kernfs node
 *
 * Security hooks for file operations
 *
 * @file_permission:
 *	Check file permissions before accessing an open file.  This hook is
 *	called by various operations that read or write files.  A security
 *	module can use this hook to perform additional checking on these
 *	operations, e.g.  to revalidate permissions on use to support privilege
 *	bracketing or policy changes.  Notice that this hook is used when the
 *	actual read/write operations are performed, whereas the
 *	inode_security_ops hook is called when a file is opened (as well as
 *	many other operations).
 *	Caveat:  Although this hook can be used to revalidate permissions for
 *	various system call operations that read or write files, it does not
 *	address the revalidation of permissions for memory-mapped files.
 *	Security modules must handle this separately if they need such
 *	revalidation.
 *	@file contains the file structure being accessed.
 *	@mask contains the requested permissions.
 *	Return 0 if permission is granted.
 * @file_alloc_security:
 *	Allocate and attach a security structure to the file->f_security field.
 *	The security field is initialized to NULL when the structure is first
 *	created.
 *	@file contains the file structure to secure.
 *	Return 0 if the hook is successful and permission is granted.
 * @file_free_security:
 *	Deallocate and free any security structures stored in file->f_security.
 *	@file contains the file structure being modified.
 * @file_ioctl:
 *	@file contains the file structure.
 *	@cmd contains the operation to perform.
 *	@arg contains the operational arguments.
 *	Check permission for an ioctl operation on @file.  Note that @arg
 *	sometimes represents a user space pointer; in other cases, it may be a
 *	simple integer value.  When @arg represents a user space pointer, it
 *	should never be used by the security module.
 *	Return 0 if permission is granted.
 * @mmap_addr :
 *	Check permissions for a mmap operation at @addr.
 *	@addr contains virtual address that will be used for the operation.
 *	Return 0 if permission is granted.
 * @mmap_file :
 *	Check permissions for a mmap operation.  The @file may be NULL, e.g.
 *	if mapping anonymous memory.
 *	@file contains the file structure for file to map (may be NULL).
 *	@reqprot contains the protection requested by the application.
 *	@prot contains the protection that will be applied by the kernel.
 *	@flags contains the operational flags.
 *	Return 0 if permission is granted.
 * @file_mprotect:
 *	Check permissions before changing memory access permissions.
 *	@vma contains the memory region to modify.
 *	@reqprot contains the protection requested by the application.
 *	@prot contains the protection that will be applied by the kernel.
 *	Return 0 if permission is granted.
 * @file_lock:
 *	Check permission before performing file locking operations.
 *	Note: this hook mediates both flock and fcntl style locks.
 *	@file contains the file structure.
 *	@cmd contains the posix-translated lock operation to perform
 *	(e.g. F_RDLCK, F_WRLCK).
 *	Return 0 if permission is granted.
 * @file_fcntl:
 *	Check permission before allowing the file operation specified by @cmd
 *	from being performed on the file @file.  Note that @arg sometimes
 *	represents a user space pointer; in other cases, it may be a simple
 *	integer value.  When @arg represents a user space pointer, it should
 *	never be used by the security module.
 *	@file contains the file structure.
 *	@cmd contains the operation to be performed.
 *	@arg contains the operational arguments.
 *	Return 0 if permission is granted.
 * @file_set_fowner:
 *	Save owner security information (typically from current->security) in
 *	file->f_security for later use by the send_sigiotask hook.
 *	@file contains the file structure to update.
 *	Return 0 on success.
 * @file_send_sigiotask:
 *	Check permission for the file owner @fown to send SIGIO or SIGURG to the
 *	process @tsk.  Note that this hook is sometimes called from interrupt.
 *	Note that the fown_struct, @fown, is never outside the context of a
 *	struct file, so the file structure (and associated security information)
 *	can always be obtained: container_of(fown, struct file, f_owner)
 *	@tsk contains the structure of task receiving signal.
 *	@fown contains the file owner information.
 *	@sig is the signal that will be sent.  When 0, kernel sends SIGIO.
 *	Return 0 if permission is granted.
 * @file_receive:
 *	This hook allows security modules to control the ability of a process
 *	to receive an open file descriptor via socket IPC.
 *	@file contains the file structure being received.
 *	Return 0 if permission is granted.
 * @file_open:
 *	Save open-time permission checking state for later use upon
 *	file_permission, and recheck access if anything has changed
 *	since inode_permission.
 *
 * Security hooks for task operations.
 *
 * @task_alloc:
 *	@task task being allocated.
 *	@clone_flags contains the flags indicating what should be shared.
 *	Handle allocation of task-related resources.
 *	Returns a zero on success, negative values on failure.
 * @task_free:
 *	@task task about to be freed.
 *	Handle release of task-related resources. (Note that this can be called
 *	from interrupt context.)
 * @cred_alloc_blank:
 *	@cred points to the credentials.
 *	@gfp indicates the atomicity of any memory allocations.
 *	Only allocate sufficient memory and attach to @cred such that
 *	cred_transfer() will not get ENOMEM.
 * @cred_free:
 *	@cred points to the credentials.
 *	Deallocate and clear the cred->security field in a set of credentials.
 * @cred_prepare:
 *	@new points to the new credentials.
 *	@old points to the original credentials.
 *	@gfp indicates the atomicity of any memory allocations.
 *	Prepare a new set of credentials by copying the data from the old set.
 * @cred_transfer:
 *	@new points to the new credentials.
 *	@old points to the original credentials.
 *	Transfer data from original creds to new creds
 * @cred_getsecid:
 *	Retrieve the security identifier of the cred structure @c
 *	@c contains the credentials, secid will be placed into @secid.
 *	In case of failure, @secid will be set to zero.
 * @kernel_act_as:
 *	Set the credentials for a kernel service to act as (subjective context).
 *	@new points to the credentials to be modified.
 *	@secid specifies the security ID to be set
 *	The current task must be the one that nominated @secid.
 *	Return 0 if successful.
 * @kernel_create_files_as:
 *	Set the file creation context in a set of credentials to be the same as
 *	the objective context of the specified inode.
 *	@new points to the credentials to be modified.
 *	@inode points to the inode to use as a reference.
 *	The current task must be the one that nominated @inode.
 *	Return 0 if successful.
 * @kernel_module_request:
 *	Ability to trigger the kernel to automatically upcall to userspace for
 *	userspace to load a kernel module with the given name.
 *	@kmod_name name of the module requested by the kernel
 *	Return 0 if successful.
 * @kernel_load_data:
 *	Load data provided by userspace.
 *	@id kernel load data identifier
 *	Return 0 if permission is granted.
 * @kernel_read_file:
 *	Read a file specified by userspace.
 *	@file contains the file structure pointing to the file being read
 *	by the kernel.
 *	@id kernel read file identifier
 *	Return 0 if permission is granted.
 * @kernel_post_read_file:
 *	Read a file specified by userspace.
 *	@file contains the file structure pointing to the file being read
 *	by the kernel.
 *	@buf pointer to buffer containing the file contents.
 *	@size length of the file contents.
 *	@id kernel read file identifier
 *	Return 0 if permission is granted.
 * @task_fix_setuid:
 *	Update the module's state after setting one or more of the user
 *	identity attributes of the current process.  The @flags parameter
 *	indicates which of the set*uid system calls invoked this hook.  If
 *	@new is the set of credentials that will be installed.  Modifications
 *	should be made to this rather than to @current->cred.
 *	@old is the set of credentials that are being replaces
 *	@flags contains one of the LSM_SETID_* values.
 *	Return 0 on success.
 * @task_setpgid:
 *	Check permission before setting the process group identifier of the
 *	process @p to @pgid.
 *	@p contains the task_struct for process being modified.
 *	@pgid contains the new pgid.
 *	Return 0 if permission is granted.
 * @task_getpgid:
 *	Check permission before getting the process group identifier of the
 *	process @p.
 *	@p contains the task_struct for the process.
 *	Return 0 if permission is granted.
 * @task_getsid:
 *	Check permission before getting the session identifier of the process
 *	@p.
 *	@p contains the task_struct for the process.
 *	Return 0 if permission is granted.
 * @task_getsecid:
 *	Retrieve the security identifier of the process @p.
 *	@p contains the task_struct for the process and place is into @secid.
 *	In case of failure, @secid will be set to zero.
 *
 * @task_setnice:
 *	Check permission before setting the nice value of @p to @nice.
 *	@p contains the task_struct of process.
 *	@nice contains the new nice value.
 *	Return 0 if permission is granted.
 * @task_setioprio
 *	Check permission before setting the ioprio value of @p to @ioprio.
 *	@p contains the task_struct of process.
 *	@ioprio contains the new ioprio value
 *	Return 0 if permission is granted.
 * @task_getioprio
 *	Check permission before getting the ioprio value of @p.
 *	@p contains the task_struct of process.
 *	Return 0 if permission is granted.
 * @task_prlimit:
 *	Check permission before getting and/or setting the resource limits of
 *	another task.
 *	@cred points to the cred structure for the current task.
 *	@tcred points to the cred structure for the target task.
 *	@flags contains the LSM_PRLIMIT_* flag bits indicating whether the
 *	resource limits are being read, modified, or both.
 *	Return 0 if permission is granted.
 * @task_setrlimit:
 *	Check permission before setting the resource limits of process @p
 *	for @resource to @new_rlim.  The old resource limit values can
 *	be examined by dereferencing (p->signal->rlim + resource).
 *	@p points to the task_struct for the target task's group leader.
 *	@resource contains the resource whose limit is being set.
 *	@new_rlim contains the new limits for @resource.
 *	Return 0 if permission is granted.
 * @task_setscheduler:
 *	Check permission before setting scheduling policy and/or parameters of
 *	process @p based on @policy and @lp.
 *	@p contains the task_struct for process.
 *	@policy contains the scheduling policy.
 *	@lp contains the scheduling parameters.
 *	Return 0 if permission is granted.
 * @task_getscheduler:
 *	Check permission before obtaining scheduling information for process
 *	@p.
 *	@p contains the task_struct for process.
 *	Return 0 if permission is granted.
 * @task_movememory
 *	Check permission before moving memory owned by process @p.
 *	@p contains the task_struct for process.
 *	Return 0 if permission is granted.
 * @task_kill:
 *	Check permission before sending signal @sig to @p.  @info can be NULL,
 *	the constant 1, or a pointer to a kernel_siginfo structure.  If @info is 1 or
 *	SI_FROMKERNEL(info) is true, then the signal should be viewed as coming
 *	from the kernel and should typically be permitted.
 *	SIGIO signals are handled separately by the send_sigiotask hook in
 *	file_security_ops.
 *	@p contains the task_struct for process.
 *	@info contains the signal information.
 *	@sig contains the signal value.
 *	@cred contains the cred of the process where the signal originated, or
 *	NULL if the current task is the originator.
 *	Return 0 if permission is granted.
 * @task_prctl:
 *	Check permission before performing a process control operation on the
 *	current process.
 *	@option contains the operation.
 *	@arg2 contains a argument.
 *	@arg3 contains a argument.
 *	@arg4 contains a argument.
 *	@arg5 contains a argument.
 *	Return -ENOSYS if no-one wanted to handle this op, any other value to
 *	cause prctl() to return immediately with that value.
 * @task_to_inode:
 *	Set the security attributes for an inode based on an associated task's
 *	security attributes, e.g. for /proc/pid inodes.
 *	@p contains the task_struct for the task.
 *	@inode contains the inode structure for the inode.
 *
 * Security hooks for Netlink messaging.
 *
 * @netlink_send:
 *	Save security information for a netlink message so that permission
 *	checking can be performed when the message is processed.  The security
 *	information can be saved using the eff_cap field of the
 *	netlink_skb_parms structure.  Also may be used to provide fine
 *	grained control over message transmission.
 *	@sk associated sock of task sending the message.
 *	@skb contains the sk_buff structure for the netlink message.
 *	Return 0 if the information was successfully saved and message
 *	is allowed to be transmitted.
 *
 * Security hooks for Unix domain networking.
 *
 * @unix_stream_connect:
 *	Check permissions before establishing a Unix domain stream connection
 *	between @sock and @other.
 *	@sock contains the sock structure.
 *	@other contains the peer sock structure.
 *	@newsk contains the new sock structure.
 *	Return 0 if permission is granted.
 * @unix_may_send:
 *	Check permissions before connecting or sending datagrams from @sock to
 *	@other.
 *	@sock contains the socket structure.
 *	@other contains the peer socket structure.
 *	Return 0 if permission is granted.
 *
 * The @unix_stream_connect and @unix_may_send hooks were necessary because
 * Linux provides an alternative to the conventional file name space for Unix
 * domain sockets.  Whereas binding and connecting to sockets in the file name
 * space is mediated by the typical file permissions (and caught by the mknod
 * and permission hooks in inode_security_ops), binding and connecting to
 * sockets in the abstract name space is completely unmediated.  Sufficient
 * control of Unix domain sockets in the abstract name space isn't possible
 * using only the socket layer hooks, since we need to know the actual target
 * socket, which is not looked up until we are inside the af_unix code.
 *
 * Security hooks for socket operations.
 *
 * @socket_create:
 *	Check permissions prior to creating a new socket.
 *	@family contains the requested protocol family.
 *	@type contains the requested communications type.
 *	@protocol contains the requested protocol.
 *	@kern set to 1 if a kernel socket.
 *	Return 0 if permission is granted.
 * @socket_post_create:
 *	This hook allows a module to update or allocate a per-socket security
 *	structure. Note that the security field was not added directly to the
 *	socket structure, but rather, the socket security information is stored
 *	in the associated inode.  Typically, the inode alloc_security hook will
 *	allocate and and attach security information to
 *	sock->inode->i_security.  This hook may be used to update the
 *	sock->inode->i_security field with additional information that wasn't
 *	available when the inode was allocated.
 *	@sock contains the newly created socket structure.
 *	@family contains the requested protocol family.
 *	@type contains the requested communications type.
 *	@protocol contains the requested protocol.
 *	@kern set to 1 if a kernel socket.
 * @socket_socketpair:
 *	Check permissions before creating a fresh pair of sockets.
 *	@socka contains the first socket structure.
 *	@sockb contains the second socket structure.
 *	Return 0 if permission is granted and the connection was established.
 * @socket_bind:
 *	Check permission before socket protocol layer bind operation is
 *	performed and the socket @sock is bound to the address specified in the
 *	@address parameter.
 *	@sock contains the socket structure.
 *	@address contains the address to bind to.
 *	@addrlen contains the length of address.
 *	Return 0 if permission is granted.
 * @socket_connect:
 *	Check permission before socket protocol layer connect operation
 *	attempts to connect socket @sock to a remote address, @address.
 *	@sock contains the socket structure.
 *	@address contains the address of remote endpoint.
 *	@addrlen contains the length of address.
 *	Return 0 if permission is granted.
 * @socket_listen:
 *	Check permission before socket protocol layer listen operation.
 *	@sock contains the socket structure.
 *	@backlog contains the maximum length for the pending connection queue.
 *	Return 0 if permission is granted.
 * @socket_accept:
 *	Check permission before accepting a new connection.  Note that the new
 *	socket, @newsock, has been created and some information copied to it,
 *	but the accept operation has not actually been performed.
 *	@sock contains the listening socket structure.
 *	@newsock contains the newly created server socket for connection.
 *	Return 0 if permission is granted.
 * @socket_sendmsg:
 *	Check permission before transmitting a message to another socket.
 *	@sock contains the socket structure.
 *	@msg contains the message to be transmitted.
 *	@size contains the size of message.
 *	Return 0 if permission is granted.
 * @socket_recvmsg:
 *	Check permission before receiving a message from a socket.
 *	@sock contains the socket structure.
 *	@msg contains the message structure.
 *	@size contains the size of message structure.
 *	@flags contains the operational flags.
 *	Return 0 if permission is granted.
 * @socket_getsockname:
 *	Check permission before the local address (name) of the socket object
 *	@sock is retrieved.
 *	@sock contains the socket structure.
 *	Return 0 if permission is granted.
 * @socket_getpeername:
 *	Check permission before the remote address (name) of a socket object
 *	@sock is retrieved.
 *	@sock contains the socket structure.
 *	Return 0 if permission is granted.
 * @socket_getsockopt:
 *	Check permissions before retrieving the options associated with socket
 *	@sock.
 *	@sock contains the socket structure.
 *	@level contains the protocol level to retrieve option from.
 *	@optname contains the name of option to retrieve.
 *	Return 0 if permission is granted.
 * @socket_setsockopt:
 *	Check permissions before setting the options associated with socket
 *	@sock.
 *	@sock contains the socket structure.
 *	@level contains the protocol level to set options for.
 *	@optname contains the name of the option to set.
 *	Return 0 if permission is granted.
 * @socket_shutdown:
 *	Checks permission before all or part of a connection on the socket
 *	@sock is shut down.
 *	@sock contains the socket structure.
 *	@how contains the flag indicating how future sends and receives
 *	are handled.
 *	Return 0 if permission is granted.
 * @socket_sock_rcv_skb:
 *	Check permissions on incoming network packets.  This hook is distinct
 *	from Netfilter's IP input hooks since it is the first time that the
 *	incoming sk_buff @skb has been associated with a particular socket, @sk.
 *	Must not sleep inside this hook because some callers hold spinlocks.
 *	@sk contains the sock (not socket) associated with the incoming sk_buff.
 *	@skb contains the incoming network data.
 * @socket_getpeersec_stream:
 *	This hook allows the security module to provide peer socket security
 *	state for unix or connected tcp sockets to userspace via getsockopt
 *	SO_GETPEERSEC.  For tcp sockets this can be meaningful if the
 *	socket is associated with an ipsec SA.
 *	@sock is the local socket.
 *	@optval userspace memory where the security state is to be copied.
 *	@optlen userspace int where the module should copy the actual length
 *	of the security state.
 *	@len as input is the maximum length to copy to userspace provided
 *	by the caller.
 *	Return 0 if all is well, otherwise, typical getsockopt return
 *	values.
 * @socket_getpeersec_dgram:
 *	This hook allows the security module to provide peer socket security
 *	state for udp sockets on a per-packet basis to userspace via
 *	getsockopt SO_GETPEERSEC.  The application must first have indicated
 *	the IP_PASSSEC option via getsockopt.  It can then retrieve the
 *	security state returned by this hook for a packet via the SCM_SECURITY
 *	ancillary message type.
 *	@skb is the skbuff for the packet being queried
 *	@secdata is a pointer to a buffer in which to copy the security data
 *	@seclen is the maximum length for @secdata
 *	Return 0 on success, error on failure.
 * @sk_alloc_security:
 *	Allocate and attach a security structure to the sk->sk_security field,
 *	which is used to copy security attributes between local stream sockets.
 * @sk_free_security:
 *	Deallocate security structure.
 * @sk_clone_security:
 *	Clone/copy security structure.
 * @sk_getsecid:
 *	Retrieve the LSM-specific secid for the sock to enable caching
 *	of network authorizations.
 * @sock_graft:
 *	Sets the socket's isec sid to the sock's sid.
 * @inet_conn_request:
 *	Sets the openreq's sid to socket's sid with MLS portion taken
 *	from peer sid.
 * @inet_csk_clone:
 *	Sets the new child socket's sid to the openreq sid.
 * @inet_conn_established:
 *	Sets the connection's peersid to the secmark on skb.
 * @secmark_relabel_packet:
 *	check if the process should be allowed to relabel packets to
 *	the given secid
 * @security_secmark_refcount_inc
 *	tells the LSM to increment the number of secmark labeling rules loaded
 * @security_secmark_refcount_dec
 *	tells the LSM to decrement the number of secmark labeling rules loaded
 * @req_classify_flow:
 *	Sets the flow's sid to the openreq sid.
 * @tun_dev_alloc_security:
 *	This hook allows a module to allocate a security structure for a TUN
 *	device.
 *	@security pointer to a security structure pointer.
 *	Returns a zero on success, negative values on failure.
 * @tun_dev_free_security:
 *	This hook allows a module to free the security structure for a TUN
 *	device.
 *	@security pointer to the TUN device's security structure
 * @tun_dev_create:
 *	Check permissions prior to creating a new TUN device.
 * @tun_dev_attach_queue:
 *	Check permissions prior to attaching to a TUN device queue.
 *	@security pointer to the TUN device's security structure.
 * @tun_dev_attach:
 *	This hook can be used by the module to update any security state
 *	associated with the TUN device's sock structure.
 *	@sk contains the existing sock structure.
 *	@security pointer to the TUN device's security structure.
 * @tun_dev_open:
 *	This hook can be used by the module to update any security state
 *	associated with the TUN device's security structure.
 *	@security pointer to the TUN devices's security structure.
 *
 * Security hooks for SCTP
 *
 * @sctp_assoc_request:
 *	Passes the @asoc and @chunk->skb of the association INIT packet to
 *	the security module.
 *	@asoc pointer to sctp association structure.
 *	@skb pointer to skbuff of association packet.
 *	Return 0 on success, error on failure.
 * @sctp_bind_connect:
 *	Validiate permissions required for each address associated with sock
 *	@sk. Depending on @optname, the addresses will be treated as either
 *	for a connect or bind service. The @addrlen is calculated on each
 *	ipv4 and ipv6 address using sizeof(struct sockaddr_in) or
 *	sizeof(struct sockaddr_in6).
 *	@sk pointer to sock structure.
 *	@optname name of the option to validate.
 *	@address list containing one or more ipv4/ipv6 addresses.
 *	@addrlen total length of address(s).
 *	Return 0 on success, error on failure.
 * @sctp_sk_clone:
 *	Called whenever a new socket is created by accept(2) (i.e. a TCP
 *	style socket) or when a socket is 'peeled off' e.g userspace
 *	calls sctp_peeloff(3).
 *	@asoc pointer to current sctp association structure.
 *	@sk pointer to current sock structure.
 *	@newsk pointer to new sock structure.
 * @sctp_assoc_established:
 *	Passes the @asoc and @chunk->skb of the association COOKIE_ACK packet
 *	to the security module.
 *	@asoc pointer to sctp association structure.
 *	@skb pointer to skbuff of association packet.
 *
 * Security hooks for Infiniband
 *
 * @ib_pkey_access:
 *	Check permission to access a pkey when modifing a QP.
 *	@subnet_prefix the subnet prefix of the port being used.
 *	@pkey the pkey to be accessed.
 *	@sec pointer to a security structure.
 * @ib_endport_manage_subnet:
 *	Check permissions to send and receive SMPs on a end port.
 *	@dev_name the IB device name (i.e. mlx4_0).
 *	@port_num the port number.
 *	@sec pointer to a security structure.
 * @ib_alloc_security:
 *	Allocate a security structure for Infiniband objects.
 *	@sec pointer to a security structure pointer.
 *	Returns 0 on success, non-zero on failure
 * @ib_free_security:
 *	Deallocate an Infiniband security structure.
 *	@sec contains the security structure to be freed.
 *
 * Security hooks for XFRM operations.
 *
 * @xfrm_policy_alloc_security:
 *	@ctxp is a pointer to the xfrm_sec_ctx being added to Security Policy
 *	Database used by the XFRM system.
 *	@sec_ctx contains the security context information being provided by
 *	the user-level policy update program (e.g., setkey).
 *	Allocate a security structure to the xp->security field; the security
 *	field is initialized to NULL when the xfrm_policy is allocated.
 *	Return 0 if operation was successful (memory to allocate, legal context)
 *	@gfp is to specify the context for the allocation
 * @xfrm_policy_clone_security:
 *	@old_ctx contains an existing xfrm_sec_ctx.
 *	@new_ctxp contains a new xfrm_sec_ctx being cloned from old.
 *	Allocate a security structure in new_ctxp that contains the
 *	information from the old_ctx structure.
 *	Return 0 if operation was successful (memory to allocate).
 * @xfrm_policy_free_security:
 *	@ctx contains the xfrm_sec_ctx
 *	Deallocate xp->security.
 * @xfrm_policy_delete_security:
 *	@ctx contains the xfrm_sec_ctx.
 *	Authorize deletion of xp->security.
 * @xfrm_state_alloc:
 *	@x contains the xfrm_state being added to the Security Association
 *	Database by the XFRM system.
 *	@sec_ctx contains the security context information being provided by
 *	the user-level SA generation program (e.g., setkey or racoon).
 *	Allocate a security structure to the x->security field; the security
 *	field is initialized to NULL when the xfrm_state is allocated. Set the
 *	context to correspond to sec_ctx. Return 0 if operation was successful
 *	(memory to allocate, legal context).
 * @xfrm_state_alloc_acquire:
 *	@x contains the xfrm_state being added to the Security Association
 *	Database by the XFRM system.
 *	@polsec contains the policy's security context.
 *	@secid contains the secid from which to take the mls portion of the
 *	context.
 *	Allocate a security structure to the x->security field; the security
 *	field is initialized to NULL when the xfrm_state is allocated. Set the
 *	context to correspond to secid. Return 0 if operation was successful
 *	(memory to allocate, legal context).
 * @xfrm_state_free_security:
 *	@x contains the xfrm_state.
 *	Deallocate x->security.
 * @xfrm_state_delete_security:
 *	@x contains the xfrm_state.
 *	Authorize deletion of x->security.
 * @xfrm_policy_lookup:
 *	@ctx contains the xfrm_sec_ctx for which the access control is being
 *	checked.
 *	@fl_secid contains the flow security label that is used to authorize
 *	access to the policy xp.
 *	@dir contains the direction of the flow (input or output).
 *	Check permission when a flow selects a xfrm_policy for processing
 *	XFRMs on a packet.  The hook is called when selecting either a
 *	per-socket policy or a generic xfrm policy.
 *	Return 0 if permission is granted, -ESRCH otherwise, or -errno
 *	on other errors.
 * @xfrm_state_pol_flow_match:
 *	@x contains the state to match.
 *	@xp contains the policy to check for a match.
 *	@fl contains the flow to check for a match.
 *	Return 1 if there is a match.
 * @xfrm_decode_session:
 *	@skb points to skb to decode.
 *	@secid points to the flow key secid to set.
 *	@ckall says if all xfrms used should be checked for same secid.
 *	Return 0 if ckall is zero or all xfrms used have the same secid.
 *
 * Security hooks affecting all Key Management operations
 *
 * @key_alloc:
 *	Permit allocation of a key and assign security data. Note that key does
 *	not have a serial number assigned at this point.
 *	@key points to the key.
 *	@flags is the allocation flags
 *	Return 0 if permission is granted, -ve error otherwise.
 * @key_free:
 *	Notification of destruction; free security data.
 *	@key points to the key.
 *	No return value.
 * @key_permission:
 *	See whether a specific operational right is granted to a process on a
 *	key.
 *	@key_ref refers to the key (key pointer + possession attribute bit).
 *	@cred points to the credentials to provide the context against which to
 *	evaluate the security data on the key.
 *	@perm describes the combination of permissions required of this key.
 *	Return 0 if permission is granted, -ve error otherwise.
 * @key_getsecurity:
 *	Get a textual representation of the security context attached to a key
 *	for the purposes of honouring KEYCTL_GETSECURITY.  This function
 *	allocates the storage for the NUL-terminated string and the caller
 *	should free it.
 *	@key points to the key to be queried.
 *	@_buffer points to a pointer that should be set to point to the
 *	resulting string (if no label or an error occurs).
 *	Return the length of the string (including terminating NUL) or -ve if
 *	an error.
 *	May also return 0 (and a NULL buffer pointer) if there is no label.
 *
 * Security hooks affecting all System V IPC operations.
 *
 * @ipc_permission:
 *	Check permissions for access to IPC
 *	@ipcp contains the kernel IPC permission structure
 *	@flag contains the desired (requested) permission set
 *	Return 0 if permission is granted.
 * @ipc_getsecid:
 *	Get the secid associated with the ipc object.
 *	@ipcp contains the kernel IPC permission structure.
 *	@secid contains a pointer to the location where result will be saved.
 *	In case of failure, @secid will be set to zero.
 *
 * Security hooks for individual messages held in System V IPC message queues
 * @msg_msg_alloc_security:
 *	Allocate and attach a security structure to the msg->security field.
 *	The security field is initialized to NULL when the structure is first
 *	created.
 *	@msg contains the message structure to be modified.
 *	Return 0 if operation was successful and permission is granted.
 * @msg_msg_free_security:
 *	Deallocate the security structure for this message.
 *	@msg contains the message structure to be modified.
 *
 * Security hooks for System V IPC Message Queues
 *
 * @msg_queue_alloc_security:
 *	Allocate and attach a security structure to the
 *	@perm->security field. The security field is initialized to
 *	NULL when the structure is first created.
 *	@perm contains the IPC permissions of the message queue.
 *	Return 0 if operation was successful and permission is granted.
 * @msg_queue_free_security:
 *	Deallocate security field @perm->security for the message queue.
 *	@perm contains the IPC permissions of the message queue.
 * @msg_queue_associate:
 *	Check permission when a message queue is requested through the
 *	msgget system call. This hook is only called when returning the
 *	message queue identifier for an existing message queue, not when a
 *	new message queue is created.
 *	@perm contains the IPC permissions of the message queue.
 *	@msqflg contains the operation control flags.
 *	Return 0 if permission is granted.
 * @msg_queue_msgctl:
 *	Check permission when a message control operation specified by @cmd
 *	is to be performed on the message queue with permissions @perm.
 *	The @perm may be NULL, e.g. for IPC_INFO or MSG_INFO.
 *	@perm contains the IPC permissions of the msg queue. May be NULL.
 *	@cmd contains the operation to be performed.
 *	Return 0 if permission is granted.
 * @msg_queue_msgsnd:
 *	Check permission before a message, @msg, is enqueued on the message
 *	queue with permissions @perm.
 *	@perm contains the IPC permissions of the message queue.
 *	@msg contains the message to be enqueued.
 *	@msqflg contains operational flags.
 *	Return 0 if permission is granted.
 * @msg_queue_msgrcv:
 *	Check permission before a message, @msg, is removed from the message
 *	queue. The @target task structure contains a pointer to the
 *	process that will be receiving the message (not equal to the current
 *	process when inline receives are being performed).
 *	@perm contains the IPC permissions of the message queue.
 *	@msg contains the message destination.
 *	@target contains the task structure for recipient process.
 *	@type contains the type of message requested.
 *	@mode contains the operational flags.
 *	Return 0 if permission is granted.
 *
 * Security hooks for System V Shared Memory Segments
 *
 * @shm_alloc_security:
 *	Allocate and attach a security structure to the @perm->security
 *	field. The security field is initialized to NULL when the structure is
 *	first created.
 *	@perm contains the IPC permissions of the shared memory structure.
 *	Return 0 if operation was successful and permission is granted.
 * @shm_free_security:
 *	Deallocate the security structure @perm->security for the memory segment.
 *	@perm contains the IPC permissions of the shared memory structure.
 * @shm_associate:
 *	Check permission when a shared memory region is requested through the
 *	shmget system call. This hook is only called when returning the shared
 *	memory region identifier for an existing region, not when a new shared
 *	memory region is created.
 *	@perm contains the IPC permissions of the shared memory structure.
 *	@shmflg contains the operation control flags.
 *	Return 0 if permission is granted.
 * @shm_shmctl:
 *	Check permission when a shared memory control operation specified by
 *	@cmd is to be performed on the shared memory region with permissions @perm.
 *	The @perm may be NULL, e.g. for IPC_INFO or SHM_INFO.
 *	@perm contains the IPC permissions of the shared memory structure.
 *	@cmd contains the operation to be performed.
 *	Return 0 if permission is granted.
 * @shm_shmat:
 *	Check permissions prior to allowing the shmat system call to attach the
 *	shared memory segment with permissions @perm to the data segment of the
 *	calling process. The attaching address is specified by @shmaddr.
 *	@perm contains the IPC permissions of the shared memory structure.
 *	@shmaddr contains the address to attach memory region to.
 *	@shmflg contains the operational flags.
 *	Return 0 if permission is granted.
 *
 * Security hooks for System V Semaphores
 *
 * @sem_alloc_security:
 *	Allocate and attach a security structure to the @perm->security
 *	field. The security field is initialized to NULL when the structure is
 *	first created.
 *	@perm contains the IPC permissions of the semaphore.
 *	Return 0 if operation was successful and permission is granted.
 * @sem_free_security:
 *	Deallocate security structure @perm->security for the semaphore.
 *	@perm contains the IPC permissions of the semaphore.
 * @sem_associate:
 *	Check permission when a semaphore is requested through the semget
 *	system call. This hook is only called when returning the semaphore
 *	identifier for an existing semaphore, not when a new one must be
 *	created.
 *	@perm contains the IPC permissions of the semaphore.
 *	@semflg contains the operation control flags.
 *	Return 0 if permission is granted.
 * @sem_semctl:
 *	Check permission when a semaphore operation specified by @cmd is to be
 *	performed on the semaphore. The @perm may be NULL, e.g. for
 *	IPC_INFO or SEM_INFO.
 *	@perm contains the IPC permissions of the semaphore. May be NULL.
 *	@cmd contains the operation to be performed.
 *	Return 0 if permission is granted.
 * @sem_semop:
 *	Check permissions before performing operations on members of the
 *	semaphore set. If the @alter flag is nonzero, the semaphore set
 *	may be modified.
 *	@perm contains the IPC permissions of the semaphore.
 *	@sops contains the operations to perform.
 *	@nsops contains the number of operations to perform.
 *	@alter contains the flag indicating whether changes are to be made.
 *	Return 0 if permission is granted.
 *
 * @binder_set_context_mgr:
 *	Check whether @mgr is allowed to be the binder context manager.
 *	@mgr contains the task_struct for the task being registered.
 *	Return 0 if permission is granted.
 * @binder_transaction:
 *	Check whether @from is allowed to invoke a binder transaction call
 *	to @to.
 *	@from contains the task_struct for the sending task.
 *	@to contains the task_struct for the receiving task.
 * @binder_transfer_binder:
 *	Check whether @from is allowed to transfer a binder reference to @to.
 *	@from contains the task_struct for the sending task.
 *	@to contains the task_struct for the receiving task.
 * @binder_transfer_file:
 *	Check whether @from is allowed to transfer @file to @to.
 *	@from contains the task_struct for the sending task.
 *	@file contains the struct file being transferred.
 *	@to contains the task_struct for the receiving task.
 *
 * @ptrace_access_check:
 *	Check permission before allowing the current process to trace the
 *	@child process.
 *	Security modules may also want to perform a process tracing check
 *	during an execve in the set_security or apply_creds hooks of
 *	tracing check during an execve in the bprm_set_creds hook of
 *	binprm_security_ops if the process is being traced and its security
 *	attributes would be changed by the execve.
 *	@child contains the task_struct structure for the target process.
 *	@mode contains the PTRACE_MODE flags indicating the form of access.
 *	Return 0 if permission is granted.
 * @ptrace_traceme:
 *	Check that the @parent process has sufficient permission to trace the
 *	current process before allowing the current process to present itself
 *	to the @parent process for tracing.
 *	@parent contains the task_struct structure for debugger process.
 *	Return 0 if permission is granted.
 * @capget:
 *	Get the @effective, @inheritable, and @permitted capability sets for
 *	the @target process.  The hook may also perform permission checking to
 *	determine if the current process is allowed to see the capability sets
 *	of the @target process.
 *	@target contains the task_struct structure for target process.
 *	@effective contains the effective capability set.
 *	@inheritable contains the inheritable capability set.
 *	@permitted contains the permitted capability set.
 *	Return 0 if the capability sets were successfully obtained.
 * @capset:
 *	Set the @effective, @inheritable, and @permitted capability sets for
 *	the current process.
 *	@new contains the new credentials structure for target process.
 *	@old contains the current credentials structure for target process.
 *	@effective contains the effective capability set.
 *	@inheritable contains the inheritable capability set.
 *	@permitted contains the permitted capability set.
 *	Return 0 and update @new if permission is granted.
 * @capable:
 *	Check whether the @tsk process has the @cap capability in the indicated
 *	credentials.
 *	@cred contains the credentials to use.
 *	@ns contains the user namespace we want the capability in
 *	@cap contains the capability <include/linux/capability.h>.
 *	@opts contains options for the capable check <include/linux/security.h>
 *	Return 0 if the capability is granted for @tsk.
 * @syslog:
 *	Check permission before accessing the kernel message ring or changing
 *	logging to the console.
 *	See the syslog(2) manual page for an explanation of the @type values.
 *	@type contains the type of action.
 *	@from_file indicates the context of action (if it came from /proc).
 *	Return 0 if permission is granted.
 * @settime:
 *	Check permission to change the system time.
 *	struct timespec64 is defined in include/linux/time64.h and timezone
 *	is defined in include/linux/time.h
 *	@ts contains new time
 *	@tz contains new timezone
 *	Return 0 if permission is granted.
 * @vm_enough_memory:
 *	Check permissions for allocating a new virtual mapping.
 *	@mm contains the mm struct it is being added to.
 *	@pages contains the number of pages.
 *	Return 0 if permission is granted.
 *
 * @ismaclabel:
 *	Check if the extended attribute specified by @name
 *	represents a MAC label. Returns 1 if name is a MAC
 *	attribute otherwise returns 0.
 *	@name full extended attribute name to check against
 *	LSM as a MAC label.
 *
 * @secid_to_secctx:
 *	Convert secid to security context.  If secdata is NULL the length of
 *	the result will be returned in seclen, but no secdata will be returned.
 *	This does mean that the length could change between calls to check the
 *	length and the next call which actually allocates and returns the
 *	secdata.
 *	@secid contains the security ID.
 *	@secdata contains the pointer that stores the converted security
 *	context.
 *	@seclen pointer which contains the length of the data
 * @secctx_to_secid:
 *	Convert security context to secid.
 *	@secid contains the pointer to the generated security ID.
 *	@secdata contains the security context.
 *
 * @release_secctx:
 *	Release the security context.
 *	@secdata contains the security context.
 *	@seclen contains the length of the security context.
 *
 * Security hooks for Audit
 *
 * @audit_rule_init:
 *	Allocate and initialize an LSM audit rule structure.
 *	@field contains the required Audit action.
 *	Fields flags are defined in include/linux/audit.h
 *	@op contains the operator the rule uses.
 *	@rulestr contains the context where the rule will be applied to.
 *	@lsmrule contains a pointer to receive the result.
 *	Return 0 if @lsmrule has been successfully set,
 *	-EINVAL in case of an invalid rule.
 *
 * @audit_rule_known:
 *	Specifies whether given @rule contains any fields related to
 *	current LSM.
 *	@rule contains the audit rule of interest.
 *	Return 1 in case of relation found, 0 otherwise.
 *
 * @audit_rule_match:
 *	Determine if given @secid matches a rule previously approved
 *	by @audit_rule_known.
 *	@secid contains the security id in question.
 *	@field contains the field which relates to current LSM.
 *	@op contains the operator that will be used for matching.
 *	@rule points to the audit rule that will be checked against.
 *	Return 1 if secid matches the rule, 0 if it does not, -ERRNO on failure.
 *
 * @audit_rule_free:
 *	Deallocate the LSM audit rule structure previously allocated by
 *	audit_rule_init.
 *	@rule contains the allocated rule
 *
 * @inode_invalidate_secctx:
 *	Notify the security module that it must revalidate the security context
 *	of an inode.
 *
 * @inode_notifysecctx:
 *	Notify the security module of what the security context of an inode
 *	should be.  Initializes the incore security context managed by the
 *	security module for this inode.  Example usage:  NFS client invokes
 *	this hook to initialize the security context in its incore inode to the
 *	value provided by the server for the file when the server returned the
 *	file's attributes to the client.
 *
 *	Must be called with inode->i_mutex locked.
 *
 *	@inode we wish to set the security context of.
 *	@ctx contains the string which we wish to set in the inode.
 *	@ctxlen contains the length of @ctx.
 *
 * @inode_setsecctx:
 *	Change the security context of an inode.  Updates the
 *	incore security context managed by the security module and invokes the
 *	fs code as needed (via __vfs_setxattr_noperm) to update any backing
 *	xattrs that represent the context.  Example usage:  NFS server invokes
 *	this hook to change the security context in its incore inode and on the
 *	backing filesystem to a value provided by the client on a SETATTR
 *	operation.
 *
 *	Must be called with inode->i_mutex locked.
 *
 *	@dentry contains the inode we wish to set the security context of.
 *	@ctx contains the string which we wish to set in the inode.
 *	@ctxlen contains the length of @ctx.
 *
 * @inode_getsecctx:
 *	On success, returns 0 and fills out @ctx and @ctxlen with the security
 *	context for the given @inode.
 *
 *	@inode we wish to get the security context of.
 *	@ctx is a pointer in which to place the allocated security context.
 *	@ctxlen points to the place to put the length of @ctx.
 *
 * Security hooks for using the eBPF maps and programs functionalities through
 * eBPF syscalls.
 *
 * @bpf:
 *	Do a initial check for all bpf syscalls after the attribute is copied
 *	into the kernel. The actual security module can implement their own
 *	rules to check the specific cmd they need.
 *
 * @bpf_map:
 *	Do a check when the kernel generate and return a file descriptor for
 *	eBPF maps.
 *
 *	@map: bpf map that we want to access
 *	@mask: the access flags
 *
 * @bpf_prog:
 *	Do a check when the kernel generate and return a file descriptor for
 *	eBPF programs.
 *
 *	@prog: bpf prog that userspace want to use.
 *
 * @bpf_map_alloc_security:
 *	Initialize the security field inside bpf map.
 *
 * @bpf_map_free_security:
 *	Clean up the security information stored inside bpf map.
 *
 * @bpf_prog_alloc_security:
 *	Initialize the security field inside bpf program.
 *
 * @bpf_prog_free_security:
 *	Clean up the security information stored inside bpf prog.
 *
 */
union security_list_options {
	#define LSM_HOOK(RET, DEFAULT, NAME, ...) RET (*NAME)(__VA_ARGS__);
	#include "lsm_hook_defs.h"
	#undef LSM_HOOK
};

struct security_hook_heads {
	#define LSM_HOOK(RET, DEFAULT, NAME, ...) struct hlist_head NAME;
	#include "lsm_hook_defs.h"
	#undef LSM_HOOK
} __randomize_layout;

/*
 * Security module hook list structure.
 * For use with generic list macros for common operations.
 */
struct security_hook_list {
	struct hlist_node		list;
	struct hlist_head		*head;
	union security_list_options	hook;
	char				*lsm;
} __randomize_layout;

/*
 * Security blob size or offset data.
 */
struct lsm_blob_sizes {
	int	lbs_cred;
	int	lbs_file;
	int	lbs_backing_file;
	int	lbs_inode;
	int	lbs_superblock;
	int	lbs_ipc;
	int	lbs_msg_msg;
	int	lbs_task;
};

/*
 * LSM_RET_VOID is used as the default value in LSM_HOOK definitions for void
 * LSM hooks (in include/linux/lsm_hook_defs.h).
 */
#define LSM_RET_VOID ((void) 0)

/*
 * Initializing a security_hook_list structure takes
 * up a lot of space in a source file. This macro takes
 * care of the common case and reduces the amount of
 * text involved.
 */
#define LSM_HOOK_INIT(HEAD, HOOK) \
	{ .head = &security_hook_heads.HEAD, .hook = { .HEAD = HOOK } }

extern struct security_hook_heads security_hook_heads;
extern char *lsm_names;

extern void security_add_hooks(struct security_hook_list *hooks, int count,
				char *lsm);

#define LSM_FLAG_LEGACY_MAJOR	BIT(0)
#define LSM_FLAG_EXCLUSIVE	BIT(1)

enum lsm_order {
	LSM_ORDER_FIRST = -1,	/* This is only for capabilities. */
	LSM_ORDER_MUTABLE = 0,
};

struct lsm_info {
	const char *name;	/* Required. */
	enum lsm_order order;	/* Optional: default is LSM_ORDER_MUTABLE */
	unsigned long flags;	/* Optional: flags describing LSM */
	int *enabled;		/* Optional: controlled by CONFIG_LSM */
	int (*init)(void);	/* Required. */
	struct lsm_blob_sizes *blobs; /* Optional: for blob sharing. */
};

extern struct lsm_info __start_lsm_info[], __end_lsm_info[];

#define DEFINE_LSM(lsm)							\
	static struct lsm_info __lsm_##lsm				\
		__used __section(.lsm_info.init)			\
		__aligned(sizeof(unsigned long))

#ifdef CONFIG_SECURITY_SELINUX_DISABLE
/*
 * Assuring the safety of deleting a security module is up to
 * the security module involved. This may entail ordering the
 * module's hook list in a particular way, refusing to disable
 * the module once a policy is loaded or any number of other
 * actions better imagined than described.
 *
 * The name of the configuration option reflects the only module
 * that currently uses the mechanism. Any developer who thinks
 * disabling their module is a good idea needs to be at least as
 * careful as the SELinux team.
 */
static inline void security_delete_hooks(struct security_hook_list *hooks,
						int count)
{
	int i;

for (i = 0; i < count; i++)
		hlist_del_rcu(&hooks[i].list);
}
#endif /* CONFIG_SECURITY_SELINUX_DISABLE */

/* Currently required to handle SELinux runtime hook disable. */
#ifdef CONFIG_SECURITY_WRITABLE_HOOKS
#define __lsm_ro_after_init
#else
#define __lsm_ro_after_init	__ro_after_init
#endif /* CONFIG_SECURITY_WRITABLE_HOOKS */

extern int lsm_inode_alloc(struct inode *inode);

#endif /* ! __LINUX_LSM_HOOKS_H */

cmd: